From: "Arend van Spriel" <arend@broadcom.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
"Arend van Spriel" <arend@broadcom.com>
Subject: [PATCH 00/22] brcmfmac: firmware-signalling fixes and cleanup
Date: Thu, 6 Jun 2013 13:17:45 +0200 [thread overview]
Message-ID: <1370517487-14395-1-git-send-email-arend@broadcom.com> (raw)
This series is intended for v3.11 and resolves a number of issues observed
testing firmware-signalling feature with power-save stations and P2P scenarios
as well as several patches for code cleanup.
The series applies to the master branch of the wireless-next repository.
Arend van Spriel (11):
brcmfmac: allow firmware-signal tlv to be longer than specified
brcmfmac: remove fifo bitfield from brcmf_skbuff_cb::if_flags
brcmfmac: rework credit pickup to assure consistent handling
brcmfmac: explicitly indicate sk_buff is sent upon request credit
brcmfmac: reducing debug logging in firmware-signalling code
brcmfmac: Sent TIM information in case of data available.
brcmfmac: fix send_pkts statistic counter in firmware-signalling
brcmfmac: use credit mechanism for BC/MC if support by firmware
brcmfmac: add trace event for capturing BDC header
brcmfmac: increment hard_header_len instead of overriding
brcmfmac: add debugfs statistics for firmware-signalling
Hante Meuleman (11):
brcmfmac: Take bus flowcontrol at credit mgmt into account.
brcmfmac: On bus flow control use fw signalling or netif.
brcmfmac: For FW signalling it is necessary to track gen bit.
brcmfmac: Correct creditmap when credit borrowing is active.
brcmfmac: Find correct MAC descriptor in case of TDLS.
brcmfmac: fix invalid ifp lookup in firmware-signalling
brcmfmac: Accept only first creditmap event.
brcmfmac: Signalling header push and pull on logic places.
brcmfmac: Fix endless loop when brcmf_fws_commit_skb fails.
brcmfmac: Simplify counting transit count.
brcmfmac: Always use fifo_credits, also for requested credits.
drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 2 +
drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 3 +
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c | 18 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 6 +-
.../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 23 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 2 +-
drivers/net/wireless/brcm80211/brcmfmac/fweh.h | 3 +-
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 730 ++++++++++----------
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h | 1 +
.../net/wireless/brcm80211/brcmfmac/tracepoint.h | 21 +
drivers/net/wireless/brcm80211/brcmfmac/usb.c | 8 +
11 files changed, 436 insertions(+), 381 deletions(-)
--
1.7.10.4
next reply other threads:[~2013-06-06 11:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-06 11:17 Arend van Spriel [this message]
2013-06-06 11:17 ` [PATCH 01/22] brcmfmac: allow firmware-signal tlv to be longer than specified Arend van Spriel
2013-06-06 11:17 ` [PATCH 02/22] brcmfmac: remove fifo bitfield from brcmf_skbuff_cb::if_flags Arend van Spriel
2013-06-06 11:17 ` [PATCH 03/22] brcmfmac: Take bus flowcontrol at credit mgmt into account Arend van Spriel
2013-06-06 11:17 ` [PATCH 04/22] brcmfmac: rework credit pickup to assure consistent handling Arend van Spriel
2013-06-06 11:17 ` [PATCH 05/22] brcmfmac: explicitly indicate sk_buff is sent upon request credit Arend van Spriel
2013-06-06 11:17 ` [PATCH 06/22] brcmfmac: reducing debug logging in firmware-signalling code Arend van Spriel
2013-06-06 11:17 ` [PATCH 07/22] brcmfmac: On bus flow control use fw signalling or netif Arend van Spriel
2013-06-06 11:17 ` [PATCH 08/22] brcmfmac: For FW signalling it is necessary to track gen bit Arend van Spriel
2013-06-06 11:17 ` [PATCH 09/22] brcmfmac: Correct creditmap when credit borrowing is active Arend van Spriel
2013-06-06 11:17 ` [PATCH 10/22] brcmfmac: Sent TIM information in case of data available Arend van Spriel
2013-06-06 11:17 ` [PATCH 11/22] brcmfmac: Find correct MAC descriptor in case of TDLS Arend van Spriel
2013-06-06 11:17 ` [PATCH 12/22] brcmfmac: fix invalid ifp lookup in firmware-signalling Arend van Spriel
2013-06-06 11:17 ` [PATCH 13/22] brcmfmac: Accept only first creditmap event Arend van Spriel
2013-06-06 11:17 ` [PATCH 14/22] brcmfmac: Signalling header push and pull on logic places Arend van Spriel
2013-06-06 11:18 ` [PATCH 15/22] brcmfmac: Fix endless loop when brcmf_fws_commit_skb fails Arend van Spriel
2013-06-06 11:18 ` [PATCH 16/22] brcmfmac: Simplify counting transit count Arend van Spriel
2013-06-06 11:18 ` [PATCH 17/22] brcmfmac: fix send_pkts statistic counter in firmware-signalling Arend van Spriel
2013-06-06 11:18 ` [PATCH 18/22] brcmfmac: Always use fifo_credits, also for requested credits Arend van Spriel
2013-06-06 11:18 ` [PATCH 19/22] brcmfmac: use credit mechanism for BC/MC if support by firmware Arend van Spriel
2013-06-06 11:18 ` [PATCH 20/22] brcmfmac: add trace event for capturing BDC header Arend van Spriel
2013-06-06 11:18 ` [PATCH 21/22] brcmfmac: increment hard_header_len instead of overriding Arend van Spriel
2013-06-06 11:18 ` [PATCH 22/22] brcmfmac: add debugfs statistics for firmware-signalling Arend van Spriel
2013-06-11 20:27 ` [PATCH 00/22] brcmfmac: firmware-signalling fixes and cleanup Arend van Spriel
2013-06-11 20:59 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370517487-14395-1-git-send-email-arend@broadcom.com \
--to=arend@broadcom.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).