From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH 1/3] ath9k_hw: Assign default xlna config for AR9485
Date: Mon, 10 Jun 2013 13:49:38 +0530 [thread overview]
Message-ID: <1370852380-8335-1-git-send-email-sujith@msujith.org> (raw)
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++++--
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index e6b92ff..25b8bbb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3563,14 +3563,18 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
{
struct ath9k_hw_capabilities *pCap = &ah->caps;
int chain;
- u32 regval;
+ u32 regval, value;
static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
AR_PHY_SWITCH_CHAIN_0,
AR_PHY_SWITCH_CHAIN_1,
AR_PHY_SWITCH_CHAIN_2,
};
- u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+ if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+ ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+ AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+ value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index e717741..5013c73 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -351,6 +351,8 @@
#define AR_PHY_CCA_NOM_VAL_9330_2GHZ -118
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
/*
* AGC Field Definitions
*/
--
1.8.3
next reply other threads:[~2013-06-10 8:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-10 8:19 Sujith Manoharan [this message]
2013-06-10 8:19 ` [PATCH 2/3] ath9k: Fix noisefloor calibration Sujith Manoharan
2013-06-10 8:19 ` [PATCH 3/3] ath9k: Do not assign noise for NULL caldata Sujith Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370852380-8335-1-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox