From: "Arend van Spriel" <arend@broadcom.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
"Arend van Spriel" <arend@broadcom.com>
Subject: [PATCH 05/12] brcmsmac: update transmit gain table for lcn phy
Date: Tue, 20 Aug 2013 16:00:39 +0200 [thread overview]
Message-ID: <1377007246-9957-6-git-send-email-arend@broadcom.com> (raw)
In-Reply-To: <1377007246-9957-1-git-send-email-arend@broadcom.com>
Update the transmit gain table for bcm4313 chip family.
Tested-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
.../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c | 216 ++++++++++----------
1 file changed, 108 insertions(+), 108 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
index deae3a7..efd5a58 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
@@ -2959,134 +2959,134 @@ dot11lcnphy_2GHz_extPA_gaintable_rev0[128] = {
};
const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_2GHz_gaintable_rev0[128] = {
- {7, 0, 31, 0, 72},
- {7, 0, 31, 0, 70},
- {7, 0, 31, 0, 68},
- {7, 0, 30, 0, 67},
- {7, 0, 29, 0, 68},
- {7, 0, 28, 0, 68},
- {7, 0, 27, 0, 69},
- {7, 0, 26, 0, 70},
- {7, 0, 25, 0, 70},
- {7, 0, 24, 0, 71},
- {7, 0, 23, 0, 72},
- {7, 0, 23, 0, 70},
- {7, 0, 22, 0, 71},
- {7, 0, 21, 0, 72},
- {7, 0, 21, 0, 70},
- {7, 0, 21, 0, 68},
- {7, 0, 21, 0, 66},
- {7, 0, 21, 0, 64},
- {7, 0, 21, 0, 63},
- {7, 0, 20, 0, 64},
- {7, 0, 19, 0, 65},
- {7, 0, 19, 0, 64},
- {7, 0, 18, 0, 65},
- {7, 0, 18, 0, 64},
- {7, 0, 17, 0, 65},
- {7, 0, 17, 0, 64},
- {7, 0, 16, 0, 65},
- {7, 0, 16, 0, 64},
- {7, 0, 16, 0, 62},
- {7, 0, 16, 0, 60},
- {7, 0, 16, 0, 58},
- {7, 0, 15, 0, 61},
- {7, 0, 15, 0, 59},
- {7, 0, 14, 0, 61},
- {7, 0, 14, 0, 60},
- {7, 0, 14, 0, 58},
- {7, 0, 13, 0, 60},
- {7, 0, 13, 0, 59},
- {7, 0, 12, 0, 62},
- {7, 0, 12, 0, 60},
- {7, 0, 12, 0, 58},
- {7, 0, 11, 0, 62},
- {7, 0, 11, 0, 60},
- {7, 0, 11, 0, 59},
- {7, 0, 11, 0, 57},
- {7, 0, 10, 0, 61},
- {7, 0, 10, 0, 59},
- {7, 0, 10, 0, 57},
- {7, 0, 9, 0, 62},
- {7, 0, 9, 0, 60},
- {7, 0, 9, 0, 58},
- {7, 0, 9, 0, 57},
- {7, 0, 8, 0, 62},
- {7, 0, 8, 0, 60},
- {7, 0, 8, 0, 58},
- {7, 0, 8, 0, 57},
- {7, 0, 8, 0, 55},
- {7, 0, 7, 0, 61},
+ {15, 0, 31, 0, 72},
+ {15, 0, 31, 0, 70},
+ {15, 0, 31, 0, 68},
+ {15, 0, 30, 0, 68},
+ {15, 0, 29, 0, 69},
+ {15, 0, 28, 0, 69},
+ {15, 0, 27, 0, 70},
+ {15, 0, 26, 0, 70},
+ {15, 0, 25, 0, 71},
+ {15, 0, 24, 0, 72},
+ {15, 0, 23, 0, 73},
+ {15, 0, 23, 0, 71},
+ {15, 0, 22, 0, 72},
+ {15, 0, 21, 0, 73},
+ {15, 0, 21, 0, 71},
+ {15, 0, 21, 0, 69},
+ {15, 0, 21, 0, 67},
+ {15, 0, 21, 0, 65},
+ {15, 0, 21, 0, 63},
+ {15, 0, 20, 0, 65},
+ {15, 0, 19, 0, 66},
+ {15, 0, 19, 0, 64},
+ {15, 0, 18, 0, 66},
+ {15, 0, 18, 0, 64},
+ {15, 0, 17, 0, 66},
+ {15, 0, 17, 0, 64},
+ {15, 0, 16, 0, 66},
+ {15, 0, 16, 0, 64},
+ {15, 0, 16, 0, 62},
+ {15, 0, 16, 0, 61},
+ {15, 0, 16, 0, 59},
+ {15, 0, 15, 0, 61},
+ {15, 0, 15, 0, 59},
+ {15, 0, 14, 0, 62},
+ {15, 0, 14, 0, 60},
+ {15, 0, 14, 0, 58},
+ {15, 0, 13, 0, 61},
+ {15, 0, 13, 0, 59},
+ {15, 0, 12, 0, 62},
+ {15, 0, 12, 0, 61},
+ {15, 0, 12, 0, 59},
+ {15, 0, 11, 0, 62},
+ {15, 0, 11, 0, 61},
+ {15, 0, 11, 0, 59},
+ {15, 0, 11, 0, 57},
+ {15, 0, 10, 0, 61},
+ {15, 0, 10, 0, 59},
+ {15, 0, 10, 0, 58},
+ {15, 0, 9, 0, 62},
+ {15, 0, 9, 0, 61},
+ {15, 0, 9, 0, 59},
+ {15, 0, 9, 0, 57},
+ {15, 0, 8, 0, 62},
+ {15, 0, 8, 0, 61},
+ {15, 0, 8, 0, 59},
+ {15, 0, 8, 0, 57},
+ {15, 0, 8, 0, 56},
+ {15, 0, 8, 0, 54},
+ {15, 0, 8, 0, 53},
+ {15, 0, 8, 0, 51},
+ {15, 0, 8, 0, 50},
+ {7, 0, 7, 0, 69},
+ {7, 0, 7, 0, 67},
+ {7, 0, 7, 0, 65},
+ {7, 0, 7, 0, 64},
+ {7, 0, 7, 0, 62},
{7, 0, 7, 0, 60},
{7, 0, 7, 0, 58},
- {7, 0, 7, 0, 56},
+ {7, 0, 7, 0, 57},
{7, 0, 7, 0, 55},
{7, 0, 6, 0, 62},
- {7, 0, 6, 0, 60},
- {7, 0, 6, 0, 58},
+ {7, 0, 6, 0, 61},
+ {7, 0, 6, 0, 59},
{7, 0, 6, 0, 57},
- {7, 0, 6, 0, 55},
+ {7, 0, 6, 0, 56},
{7, 0, 6, 0, 54},
- {7, 0, 6, 0, 52},
+ {7, 0, 6, 0, 53},
{7, 0, 5, 0, 61},
- {7, 0, 5, 0, 59},
- {7, 0, 5, 0, 57},
+ {7, 0, 5, 0, 60},
+ {7, 0, 5, 0, 58},
{7, 0, 5, 0, 56},
- {7, 0, 5, 0, 54},
+ {7, 0, 5, 0, 55},
{7, 0, 5, 0, 53},
- {7, 0, 5, 0, 51},
- {7, 0, 4, 0, 62},
- {7, 0, 4, 0, 60},
- {7, 0, 4, 0, 58},
+ {7, 0, 5, 0, 52},
+ {7, 0, 5, 0, 50},
+ {7, 0, 5, 0, 49},
+ {7, 0, 5, 0, 47},
{7, 0, 4, 0, 57},
- {7, 0, 4, 0, 55},
+ {7, 0, 4, 0, 56},
{7, 0, 4, 0, 54},
- {7, 0, 4, 0, 52},
+ {7, 0, 4, 0, 53},
{7, 0, 4, 0, 51},
- {7, 0, 4, 0, 49},
+ {7, 0, 4, 0, 50},
{7, 0, 4, 0, 48},
+ {7, 0, 4, 0, 47},
{7, 0, 4, 0, 46},
- {7, 0, 3, 0, 60},
- {7, 0, 3, 0, 58},
- {7, 0, 3, 0, 57},
- {7, 0, 3, 0, 55},
- {7, 0, 3, 0, 54},
- {7, 0, 3, 0, 52},
+ {7, 0, 4, 0, 44},
+ {7, 0, 4, 0, 43},
+ {7, 0, 4, 0, 42},
+ {7, 0, 4, 0, 41},
+ {7, 0, 4, 0, 40},
{7, 0, 3, 0, 51},
- {7, 0, 3, 0, 49},
+ {7, 0, 3, 0, 50},
{7, 0, 3, 0, 48},
+ {7, 0, 3, 0, 47},
{7, 0, 3, 0, 46},
- {7, 0, 3, 0, 45},
{7, 0, 3, 0, 44},
{7, 0, 3, 0, 43},
+ {7, 0, 3, 0, 42},
{7, 0, 3, 0, 41},
- {7, 0, 2, 0, 61},
- {7, 0, 2, 0, 59},
- {7, 0, 2, 0, 57},
- {7, 0, 2, 0, 56},
- {7, 0, 2, 0, 54},
- {7, 0, 2, 0, 53},
- {7, 0, 2, 0, 51},
- {7, 0, 2, 0, 50},
- {7, 0, 2, 0, 48},
- {7, 0, 2, 0, 47},
- {7, 0, 2, 0, 46},
- {7, 0, 2, 0, 44},
- {7, 0, 2, 0, 43},
- {7, 0, 2, 0, 42},
- {7, 0, 2, 0, 41},
- {7, 0, 2, 0, 39},
- {7, 0, 2, 0, 38},
- {7, 0, 2, 0, 37},
- {7, 0, 2, 0, 36},
- {7, 0, 2, 0, 35},
- {7, 0, 2, 0, 34},
- {7, 0, 2, 0, 33},
- {7, 0, 2, 0, 32},
- {7, 0, 1, 0, 63},
- {7, 0, 1, 0, 61},
- {7, 0, 1, 0, 59},
- {7, 0, 1, 0, 57},
+ {3, 0, 3, 0, 56},
+ {3, 0, 3, 0, 54},
+ {3, 0, 3, 0, 53},
+ {3, 0, 3, 0, 51},
+ {3, 0, 3, 0, 50},
+ {3, 0, 3, 0, 48},
+ {3, 0, 3, 0, 47},
+ {3, 0, 3, 0, 46},
+ {3, 0, 3, 0, 44},
+ {3, 0, 3, 0, 43},
+ {3, 0, 3, 0, 42},
+ {3, 0, 3, 0, 41},
+ {3, 0, 3, 0, 39},
+ {3, 0, 3, 0, 38},
+ {3, 0, 3, 0, 37},
+ {3, 0, 3, 0, 36},
+ {3, 0, 3, 0, 35},
+ {3, 0, 3, 0, 34},
};
const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_5GHz_gaintable_rev0[128] = {
--
1.7.10.4
next prev parent reply other threads:[~2013-08-20 14:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-20 14:00 [PATCH 00/12] brcmsmac: bcm4313 iPA support Arend van Spriel
2013-08-20 14:00 ` [PATCH 01/12] brcmsmac: cosmetic change in phy_lcn.c Arend van Spriel
2013-08-20 14:00 ` [PATCH 02/12] brcmsmac: change pa_gain for bcm4313 iPA Arend van Spriel
2013-08-20 14:00 ` [PATCH 03/12] brcmsmac: use ARRAY_SIZE in phytbl_lcn.c Arend van Spriel
2013-08-20 14:00 ` [PATCH 04/12] brcmsmac: add debug info message providing phy and radio info Arend van Spriel
2013-08-20 14:00 ` Arend van Spriel [this message]
2013-08-20 14:00 ` [PATCH 06/12] brcmsmac: change lcnphy receive i/q calibration routine Arend van Spriel
2013-08-20 14:00 ` [PATCH 07/12] brcmsmac: fix TSSI idle estimation Arend van Spriel
2013-08-20 14:00 ` [PATCH 08/12] brcmsmac: avoid calling set_txpwr_by_index() twice Arend van Spriel
2013-08-20 14:00 ` [PATCH 09/12] brcmsmac: rework switch control table init including iPA BT-combo Arend van Spriel
2013-08-20 14:00 ` [PATCH 10/12] brcmsmac: correct phy registers for TSSI-based power control Arend van Spriel
2013-08-20 14:00 ` [PATCH 11/12] brcmsmac: reinitialize TSSI power control upon channel switch Arend van Spriel
2013-08-20 14:00 ` [PATCH 12/12] brcmsmac: add support for BCM4313 iPA variant Arend van Spriel
2013-08-20 18:30 ` Joe Perches
2013-08-21 9:28 ` Arend van Spriel
2013-08-21 9:45 ` [PATCH V2 " Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377007246-9957-6-git-send-email-arend@broadcom.com \
--to=arend@broadcom.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).