From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <luca@coelho.fi>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 09/11] wl18xx: fix boot process in high temperature environment
Date: Tue, 17 Sep 2013 18:41:28 +0300 [thread overview]
Message-ID: <1379432490-22157-9-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1379432490-22157-1-git-send-email-eliad@wizery.com>
From: Victor Goldenshtein <victorg@ti.com>
In addition to existing WCS PLL configuration add and enable
also the coex PLL during init phase. This fixes boot failures
due to silicon latchup in high temperature environment (>85c).
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Nadim Zubidat <nadimz@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl18xx/main.c | 53 +++++++++++++++++++++++++++++++++++
drivers/net/wireless/ti/wl18xx/reg.h | 13 +++++++++
2 files changed, 66 insertions(+)
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 7aa0eb8..b47eb62 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -623,6 +623,18 @@ static const int wl18xx_rtable[REG_TABLE_LEN] = {
[REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR,
};
+static const struct wl18xx_clk_cfg wl18xx_clk_table_coex[NUM_CLOCK_CONFIGS] = {
+ [CLOCK_CONFIG_16_2_M] = { 8, 121, 0, 0, false },
+ [CLOCK_CONFIG_16_368_M] = { 8, 120, 0, 0, false },
+ [CLOCK_CONFIG_16_8_M] = { 8, 117, 0, 0, false },
+ [CLOCK_CONFIG_19_2_M] = { 10, 128, 0, 0, false },
+ [CLOCK_CONFIG_26_M] = { 11, 104, 0, 0, false },
+ [CLOCK_CONFIG_32_736_M] = { 8, 120, 0, 0, false },
+ [CLOCK_CONFIG_33_6_M] = { 8, 117, 0, 0, false },
+ [CLOCK_CONFIG_38_468_M] = { 10, 128, 0, 0, false },
+ [CLOCK_CONFIG_52_M] = { 11, 104, 0, 0, false },
+};
+
static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
[CLOCK_CONFIG_16_2_M] = { 7, 104, 801, 4, true },
[CLOCK_CONFIG_16_368_M] = { 9, 132, 3751, 4, true },
@@ -704,6 +716,23 @@ static int wl18xx_set_clk(struct wl1271 *wl)
wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
+ /* coex PLL configuration */
+ ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_N,
+ wl18xx_clk_table_coex[clk_freq].n);
+ if (ret < 0)
+ goto out;
+
+ ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_M,
+ wl18xx_clk_table_coex[clk_freq].m);
+ if (ret < 0)
+ goto out;
+
+ /* bypass the swallowing logic */
+ ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
+ PLLSH_COEX_PLL_SWALLOW_EN_VAL1);
+ if (ret < 0)
+ goto out;
+
ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N,
wl18xx_clk_table[clk_freq].n);
if (ret < 0)
@@ -745,6 +774,30 @@ static int wl18xx_set_clk(struct wl1271 *wl)
PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
}
+ /* choose WCS PLL */
+ ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_SEL,
+ PLLSH_WL_PLL_SEL_WCS_PLL);
+ if (ret < 0)
+ goto out;
+
+ /* enable both PLLs */
+ ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL1);
+ if (ret < 0)
+ goto out;
+
+ udelay(1000);
+
+ /* disable coex PLL */
+ ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL2);
+ if (ret < 0)
+ goto out;
+
+ /* reset the swallowing logic */
+ ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
+ PLLSH_COEX_PLL_SWALLOW_EN_VAL2);
+ if (ret < 0)
+ goto out;
+
out:
return ret;
}
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
index 05dd8ba..88de3f2 100644
--- a/drivers/net/wireless/ti/wl18xx/reg.h
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -114,6 +114,11 @@
#define PLATFORM_DETECTION 0xA0E3E0
#define OCS_EN 0xA02080
#define PRIMARY_CLK_DETECT 0xA020A6
+#define PLLSH_COEX_PLL_N 0xA02384
+#define PLLSH_COEX_PLL_M 0xA02382
+#define PLLSH_COEX_PLL_SWALLOW_EN 0xA0238E
+#define PLLSH_WL_PLL_SEL 0xA02398
+
#define PLLSH_WCS_PLL_N 0xA02362
#define PLLSH_WCS_PLL_M 0xA02360
#define PLLSH_WCS_PLL_Q_FACTOR_CFG_1 0xA02364
@@ -128,9 +133,17 @@
#define PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK 0xFFFF
#define PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK 0x000F
+#define PLLSH_WL_PLL_EN_VAL1 0x7
+#define PLLSH_WL_PLL_EN_VAL2 0x2
+#define PLLSH_COEX_PLL_SWALLOW_EN_VAL1 0x2
+#define PLLSH_COEX_PLL_SWALLOW_EN_VAL2 0x11
+
#define PLLSH_WCS_PLL_SWALLOW_EN_VAL1 0x1
#define PLLSH_WCS_PLL_SWALLOW_EN_VAL2 0x12
+#define PLLSH_WL_PLL_SEL_WCS_PLL 0x0
+#define PLLSH_WL_PLL_SEL_COEX_PLL 0x1
+
#define WL18XX_REG_FUSE_DATA_1_3 0xA0260C
#define WL18XX_PG_VER_MASK 0x70
#define WL18XX_PG_VER_OFFSET 4
--
1.8.3.rc1.35.g9b79519
next prev parent reply other threads:[~2013-09-17 15:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-17 15:41 [PATCH v2 01/11] wlcore: ROC on AP channel before auth reply Eliad Peller
2013-09-17 15:41 ` [PATCH v2 02/11] wlcore: add new plt power-mode: CHIP_AWAKE Eliad Peller
2013-09-17 15:41 ` [PATCH v2 03/11] wlcore: disable elp sleep while in plt mode Eliad Peller
2013-09-17 15:41 ` [PATCH v2 04/11] wlcore: re-enable idle handling Eliad Peller
2013-09-17 15:41 ` [PATCH v2 05/11] wlcore: cleanup scan debug prints Eliad Peller
2013-09-17 15:41 ` [PATCH v2 06/11] wlcore: fix unsafe dereference of the wlvif Eliad Peller
2013-09-17 15:41 ` [PATCH v2 07/11] wlcore: remove unsupported channels Eliad Peller
2013-09-17 15:41 ` [PATCH v2 08/11] wlcore: clarify and fix regulatory domain bit translation Eliad Peller
2013-09-17 15:41 ` Eliad Peller [this message]
2013-09-17 15:41 ` [PATCH v2 10/11] wl18xx: print new RDL versions during boot Eliad Peller
2013-09-30 16:57 ` Luca Coelho
2013-09-17 15:41 ` [PATCH v2 11/11] wlcore: always register dummy hardirq Eliad Peller
2013-10-04 5:10 ` [PATCH v2 01/11] wlcore: ROC on AP channel before auth reply Luca Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379432490-22157-9-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=linux-wireless@vger.kernel.org \
--cc=luca@coelho.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).