From: Eugene Krasnikov <k.eugene.e@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: wcn36xx@lists.infradead.org, Eugene Krasnikov <k.eugene.e@gmail.com>
Subject: [PATCH v4 13/16] wcn36xx: add txrx.c
Date: Sun, 22 Sep 2013 23:42:10 +0100 [thread overview]
Message-ID: <1379889733-6215-14-git-send-email-k.eugene.e@gmail.com> (raw)
In-Reply-To: <1379889733-6215-1-git-send-email-k.eugene.e@gmail.com>
adding txrx.c
Signed-off-by: Eugene Krasnikov <k.eugene.e@gmail.com>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 284 ++++++++++++++++++++++++++++++++
1 file changed, 284 insertions(+)
create mode 100644 drivers/net/wireless/ath/wcn36xx/txrx.c
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
new file mode 100644
index 0000000..b2b60e3
--- /dev/null
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright (c) 2013 Eugene Krasnikov <k.eugene.e@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "txrx.h"
+
+static inline int get_rssi0(struct wcn36xx_rx_bd *bd)
+{
+ return 100 - ((bd->phy_stat0 >> 24) & 0xff);
+}
+
+int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
+{
+ struct ieee80211_rx_status status;
+ struct ieee80211_hdr *hdr;
+ struct wcn36xx_rx_bd *bd;
+ u16 fc, sn;
+
+ /*
+ * All fields must be 0, otherwise it can lead to
+ * unexpected consequences.
+ */
+ memset(&status, 0, sizeof(status));
+
+ bd = (struct wcn36xx_rx_bd *)skb->data;
+ buff_to_be((u32 *)bd, sizeof(*bd)/sizeof(u32));
+ wcn36xx_dbg_dump(WCN36XX_DBG_RX_DUMP,
+ "BD <<< ", (char *)bd,
+ sizeof(struct wcn36xx_rx_bd));
+
+ skb_put(skb, bd->pdu.mpdu_header_off + bd->pdu.mpdu_len);
+ skb_pull(skb, bd->pdu.mpdu_header_off);
+
+ status.mactime = 10;
+ status.freq = WCN36XX_CENTER_FREQ(wcn);
+ status.band = WCN36XX_BAND(wcn);
+ status.signal = -get_rssi0(bd);
+ status.antenna = 1;
+ status.rate_idx = 1;
+ status.flag = 0;
+ status.rx_flags = 0;
+ status.flag |= RX_FLAG_IV_STRIPPED |
+ RX_FLAG_MMIC_STRIPPED |
+ RX_FLAG_DECRYPTED;
+
+ wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%x status->vendor_radiotap_len=%x\n",
+ status.flag, status.vendor_radiotap_len);
+
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ fc = __le16_to_cpu(hdr->frame_control);
+ sn = IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl));
+
+ if (ieee80211_is_beacon(hdr->frame_control)) {
+ wcn36xx_dbg(WCN36XX_DBG_BEACON, "beacon skb %p len %d fc %04x sn %d\n",
+ skb, skb->len, fc, sn);
+ wcn36xx_dbg_dump(WCN36XX_DBG_BEACON_DUMP, "SKB <<< ",
+ (char *)skb->data, skb->len);
+ } else {
+ wcn36xx_dbg(WCN36XX_DBG_RX, "rx skb %p len %d fc %04x sn %d\n",
+ skb, skb->len, fc, sn);
+ wcn36xx_dbg_dump(WCN36XX_DBG_RX_DUMP, "SKB <<< ",
+ (char *)skb->data, skb->len);
+ }
+
+ ieee80211_rx_irqsafe(wcn->hw, skb);
+
+ return 0;
+}
+
+static void wcn36xx_set_tx_pdu(struct wcn36xx_tx_bd *bd,
+ u32 mpdu_header_len,
+ u32 len,
+ u16 tid)
+{
+ bd->pdu.mpdu_header_len = mpdu_header_len;
+ bd->pdu.mpdu_header_off = sizeof(*bd);
+ bd->pdu.mpdu_data_off = bd->pdu.mpdu_header_len +
+ bd->pdu.mpdu_header_off;
+ bd->pdu.mpdu_len = len;
+ bd->pdu.tid = tid;
+}
+
+static inline struct wcn36xx_vif *get_vif_by_addr(struct wcn36xx *wcn,
+ u8 *addr)
+{
+ struct wcn36xx_vif *vif_priv = NULL;
+ struct ieee80211_vif *vif = NULL;
+ list_for_each_entry(vif_priv, &wcn->vif_list, list) {
+ vif = container_of((void *)vif_priv,
+ struct ieee80211_vif,
+ drv_priv);
+ if (memcmp(vif->addr, addr, ETH_ALEN) == 0)
+ return vif_priv;
+ }
+ wcn36xx_warn("vif %pM not found\n", addr);
+ return NULL;
+}
+static void wcn36xx_set_tx_data(struct wcn36xx_tx_bd *bd,
+ struct wcn36xx *wcn,
+ struct wcn36xx_vif **vif_priv,
+ struct wcn36xx_sta *sta_priv,
+ struct ieee80211_hdr *hdr,
+ bool bcast)
+{
+ struct ieee80211_vif *vif = NULL;
+ struct wcn36xx_vif *__vif_priv = NULL;
+ bd->bd_rate = WCN36XX_BD_RATE_DATA;
+
+ /*
+ * For not unicast frames mac80211 will not set sta pointer so use
+ * self_sta_index instead.
+ */
+ if (sta_priv) {
+ __vif_priv = sta_priv->vif;
+ vif = container_of((void *)__vif_priv,
+ struct ieee80211_vif,
+ drv_priv);
+
+ if (vif->type == NL80211_IFTYPE_STATION) {
+ bd->sta_index = sta_priv->bss_sta_index;
+ bd->dpu_desc_idx = sta_priv->bss_dpu_desc_index;
+ } else if (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MESH_POINT) {
+ bd->sta_index = sta_priv->sta_index;
+ bd->dpu_desc_idx = sta_priv->dpu_desc_index;
+ }
+ } else {
+ __vif_priv = get_vif_by_addr(wcn, hdr->addr2);
+ bd->sta_index = __vif_priv->self_sta_index;
+ bd->dpu_desc_idx = __vif_priv->self_dpu_desc_index;
+ }
+
+ bd->dpu_sign = __vif_priv->ucast_dpu_signature;
+
+ if (ieee80211_is_nullfunc(hdr->frame_control) ||
+ (sta_priv && !sta_priv->is_data_encrypted))
+ bd->dpu_ne = 1;
+
+ if (bcast) {
+ bd->ub = 1;
+ bd->ack_policy = 1;
+ }
+ *vif_priv = __vif_priv;
+}
+
+static void wcn36xx_set_tx_mgmt(struct wcn36xx_tx_bd *bd,
+ struct wcn36xx *wcn,
+ struct wcn36xx_vif **vif_priv,
+ struct ieee80211_hdr *hdr,
+ bool bcast)
+{
+ struct wcn36xx_vif *__vif_priv =
+ get_vif_by_addr(wcn, hdr->addr2);
+ bd->sta_index = __vif_priv->self_sta_index;
+ bd->dpu_desc_idx = __vif_priv->self_dpu_desc_index;
+ bd->dpu_ne = 1;
+
+ /* default rate for unicast */
+ if (ieee80211_is_mgmt(hdr->frame_control))
+ bd->bd_rate = (WCN36XX_BAND(wcn) == IEEE80211_BAND_5GHZ) ?
+ WCN36XX_BD_RATE_CTRL :
+ WCN36XX_BD_RATE_MGMT;
+ else if (ieee80211_is_ctl(hdr->frame_control))
+ bd->bd_rate = WCN36XX_BD_RATE_CTRL;
+ else
+ wcn36xx_warn("frame control type unknown\n");
+
+ /*
+ * In joining state trick hardware that probe is sent as
+ * unicast even if address is broadcast.
+ */
+ if (__vif_priv->is_joining &&
+ ieee80211_is_probe_req(hdr->frame_control))
+ bcast = false;
+
+ if (bcast) {
+ /* broadcast */
+ bd->ub = 1;
+ /* No ack needed not unicast */
+ bd->ack_policy = 1;
+ bd->queue_id = WCN36XX_TX_B_WQ_ID;
+ } else
+ bd->queue_id = WCN36XX_TX_U_WQ_ID;
+ *vif_priv = __vif_priv;
+}
+
+int wcn36xx_start_tx(struct wcn36xx *wcn,
+ struct wcn36xx_sta *sta_priv,
+ struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct wcn36xx_vif *vif_priv = NULL;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ unsigned long flags;
+ bool is_low = ieee80211_is_data(hdr->frame_control);
+ bool bcast = is_broadcast_ether_addr(hdr->addr1) ||
+ is_multicast_ether_addr(hdr->addr1);
+ struct wcn36xx_tx_bd *bd = wcn36xx_dxe_get_next_bd(wcn, is_low);
+
+ if (!bd) {
+ /*
+ * TX DXE are used in pairs. One for the BD and one for the
+ * actual frame. The BD DXE's has a preallocated buffer while
+ * the skb ones does not. If this isn't true something is really
+ * wierd. TODO: Recover from this situation
+ */
+
+ wcn36xx_err("bd address may not be NULL for BD DXE\n");
+ return -EINVAL;
+ }
+
+ memset(bd, 0, sizeof(*bd));
+
+ wcn36xx_dbg(WCN36XX_DBG_TX,
+ "tx skb %p len %d fc %04x sn %d %s %s\n",
+ skb, skb->len, __le16_to_cpu(hdr->frame_control),
+ IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl)),
+ is_low ? "low" : "high", bcast ? "bcast" : "ucast");
+
+ wcn36xx_dbg_dump(WCN36XX_DBG_TX_DUMP, "", skb->data, skb->len);
+
+ bd->dpu_rf = WCN36XX_BMU_WQ_TX;
+
+ bd->tx_comp = info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS;
+ if (bd->tx_comp) {
+ wcn36xx_dbg(WCN36XX_DBG_DXE, "TX_ACK status requested\n");
+ spin_lock_irqsave(&wcn->dxe_lock, flags);
+ if (wcn->tx_ack_skb) {
+ spin_unlock_irqrestore(&wcn->dxe_lock, flags);
+ wcn36xx_warn("tx_ack_skb already set\n");
+ return -EINVAL;
+ }
+
+ wcn->tx_ack_skb = skb;
+ spin_unlock_irqrestore(&wcn->dxe_lock, flags);
+
+ /* Only one at a time is supported by fw. Stop the TX queues
+ * until the ack status gets back.
+ *
+ * TODO: Add watchdog in case FW does not answer
+ */
+ ieee80211_stop_queues(wcn->hw);
+ }
+
+ /* Data frames served first*/
+ if (is_low) {
+ wcn36xx_set_tx_data(bd, wcn, &vif_priv, sta_priv, hdr, bcast);
+ wcn36xx_set_tx_pdu(bd,
+ ieee80211_is_data_qos(hdr->frame_control) ?
+ sizeof(struct ieee80211_qos_hdr) :
+ sizeof(struct ieee80211_hdr_3addr),
+ skb->len, sta_priv ? sta_priv->tid : 0);
+ } else {
+ /* MGMT and CTRL frames are handeld here*/
+ wcn36xx_set_tx_mgmt(bd, wcn, &vif_priv, hdr, bcast);
+ wcn36xx_set_tx_pdu(bd,
+ ieee80211_is_data_qos(hdr->frame_control) ?
+ sizeof(struct ieee80211_qos_hdr) :
+ sizeof(struct ieee80211_hdr_3addr),
+ skb->len, WCN36XX_TID);
+ }
+
+ buff_to_be((u32 *)bd, sizeof(*bd)/sizeof(u32));
+ bd->tx_bd_sign = 0xbdbdbdbd;
+
+ return wcn36xx_dxe_tx_frame(wcn, vif_priv, skb, is_low);
+}
--
1.8.1.2
next prev parent reply other threads:[~2013-09-22 22:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-22 22:41 [PATCH v4 00/16] wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware Eugene Krasnikov
2013-09-22 22:41 ` [PATCH v4 01/16] wcn36xx: add main.c Eugene Krasnikov
2013-09-22 22:41 ` [PATCH v4 02/16] wcn36xx: add wcn36xx.h Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 03/16] wcn36xx: add debug.c Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 04/16] wcn36xx: add debug.h Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 05/16] wcn36xx: add dxe.h Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 06/16] wcn36xx: add dxe.c Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 07/16] wcn36xx: add hal.h Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 08/16] wcn36xx: add pmc.h Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 09/16] wcn36xx: add pmc.c Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 10/16] wcn36xx: add smd.c Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 11/16] wcn36xx: add smd.h Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 12/16] wcn36xx: add txrx.h Eugene Krasnikov
2013-09-22 22:42 ` Eugene Krasnikov [this message]
2013-09-22 22:42 ` [PATCH v4 14/16] wcn36xx: add Kconfig Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 15/16] wcn36xx: add Makefile Eugene Krasnikov
2013-09-22 22:42 ` [PATCH v4 16/16] wcn36xx: add wcn36xx to ath Makefile and Kconfig Eugene Krasnikov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379889733-6215-14-git-send-email-k.eugene.e@gmail.com \
--to=k.eugene.e@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=wcn36xx@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox