From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] ath9k: Use correct PCIE initvals for AR9485
Date: Wed, 30 Oct 2013 12:04:48 +0530 [thread overview]
Message-ID: <1383114888-16979-1-git-send-email-sujith@msujith.org> (raw)
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Currently, the PLL is turned off for AR9485 when
switching to a low power state, but AR9485 has an issue
where the card will become unresponsive if left idle
for a long time without any traffic. To fix this,
force the PLL to always be on using a different initval
array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 11 ++------
drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 35 +++++-------------------
2 files changed, 9 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 42daea5..b054dee 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -187,17 +187,10 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
ar9485_1_1_baseband_core_txfir_coeff_japan_2484);
- /* Load PCIE SERDES settings from INI */
-
- /* Awake Setting */
-
INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9485_1_1_pcie_phy_clkreq_disable_L1);
-
- /* Sleep Setting */
-
+ ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
- ar9485_1_1_pcie_phy_clkreq_disable_L1);
+ ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
} else if (AR_SREV_9462_21(ah)) {
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
ar9462_2p1_mac_core);
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index 6f899c6..93b18ce 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -32,13 +32,6 @@ static const u32 ar9485_1_1_mac_postamble[][5] = {
{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
};
-static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x18012e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000080c},
-};
-
static const u32 ar9485Common_wo_xlna_rx_gain_1_1[][2] = {
/* Addr allmodes */
{0x00009e00, 0x037216a0},
@@ -1101,20 +1094,6 @@ static const u32 ar9485_common_rx_gain_1_1[][2] = {
{0x0000a1fc, 0x00000296},
};
-static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x18052e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000080c},
-};
-
-static const u32 ar9485_1_1_pcie_phy_clkreq_enable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x18053e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000080c},
-};
-
static const u32 ar9485_1_1_soc_preamble[][2] = {
/* Addr allmodes */
{0x00004014, 0xba280400},
@@ -1173,13 +1152,6 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
{0x0000be18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
};
-static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
- /* Addr allmodes */
- {0x00018c00, 0x18013e5e},
- {0x00018c04, 0x000801d8},
- {0x00018c08, 0x0000080c},
-};
-
static const u32 ar9485_1_1_radio_postamble[][2] = {
/* Addr allmodes */
{0x0001609c, 0x0b283f31},
@@ -1358,4 +1330,11 @@ static const u32 ar9485_1_1_baseband_core_txfir_coeff_japan_2484[][2] = {
{0x0000a3a0, 0xca9228ee},
};
+static const u32 ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1[][2] = {
+ /* Addr allmodes */
+ {0x00018c00, 0x1801265e},
+ {0x00018c04, 0x000801d8},
+ {0x00018c08, 0x0000080c},
+};
+
#endif /* INITVALS_9485_H */
--
1.8.4.1
reply other threads:[~2013-10-30 6:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383114888-16979-1-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).