[PATCH] iw: add support for 5 and 10 MHz channels in IBSS mode

[Simon Wunderlich <sw@simonwunderlich.de>]

5/10 MHz requires to send the frequency information as chandef instead
of the the old channel type, this change is included here as well.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
 ibss.c |   39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/ibss.c b/ibss.c
index 955446e..3674c1f 100644
--- a/ibss.c
+++ b/ibss.c
@@ -30,16 +30,19 @@ static int join_ibss(struct nl80211_state *state,
 	float rate;
 	int bintval;
 	int i;
+	unsigned long freq;
 	static const struct {
 		const char *name;
-		unsigned int val;
-	} htmap[] = {
-		{ .name = "HT20", .val = NL80211_CHAN_HT20, },
-		{ .name = "HT40+", .val = NL80211_CHAN_HT40PLUS, },
-		{ .name = "HT40-", .val = NL80211_CHAN_HT40MINUS, },
-		{ .name = "NOHT", .val = NL80211_CHAN_NO_HT, },
+		unsigned int width;
+		int freq1_diff;
+	} *chanmode_selected = NULL, chanmode[] = {
+		{ .name = "HT20", .width = NL80211_CHAN_WIDTH_20, .freq1_diff = 0},
+		{ .name = "HT40+", .width = NL80211_CHAN_WIDTH_40, .freq1_diff = 10},
+		{ .name = "HT40-", .width = NL80211_CHAN_WIDTH_40, .freq1_diff = -10},
+		{ .name = "NOHT", .width = NL80211_CHAN_WIDTH_20_NOHT, .freq1_diff = 0},
+		{ .name = "5MHZ", .width = NL80211_CHAN_WIDTH_5, .freq1_diff = 0},
+		{ .name = "10MHZ", .width = NL80211_CHAN_WIDTH_10, .freq1_diff = 0},
 	};
-	unsigned int htval;
 
 	if (argc < 2)
 		return 1;
@@ -50,23 +53,27 @@ static int join_ibss(struct nl80211_state *state,
 	argc--;
 
 	/* freq */
-	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ,
-		    strtoul(argv[0], &end, 10));
+	freq = strtoul(argv[0], &end, 10);
 	if (*end != '\0')
 		return 1;
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq);
 	argv++;
 	argc--;
 
 	if (argc) {
-		for (i = 0; i < ARRAY_SIZE(htmap); i++) {
-			if (strcasecmp(htmap[i].name, argv[0]) == 0) {
-				htval = htmap[i].val;
+		for (i = 0; i < ARRAY_SIZE(chanmode); i++) {
+			if (strcasecmp(chanmode[i].name, argv[0]) == 0) {
+				chanmode_selected = &chanmode[i];
 				break;
 			}
 		}
-		if (i != ARRAY_SIZE(htmap)) {
-			NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-				    htval);
+		if (chanmode_selected) {
+			NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH,
+				    chanmode_selected->width);
+			NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1,
+				    freq + chanmode_selected->freq1_diff);
+
 			argv++;
 			argc--;
 		}
@@ -164,7 +171,7 @@ COMMAND(ibss, leave, NULL,
 	NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
 	"Leave the current IBSS cell.");
 COMMAND(ibss, join,
-	"<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
+	"<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
 	" [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] "
 	"[key d:0:abcde]",
 	NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
-- 
1.7.10.4