From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v2 05/10] ath9k: Update BaseExtension_1 eeprom structure
Date: Wed, 18 Dec 2013 09:53:22 +0530 [thread overview]
Message-ID: <1387340607-20045-6-git-send-email-sujith@msujith.org> (raw)
In-Reply-To: <1387340607-20045-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
* Add a new field "misc_enable"
* Use int_8 for tempslopextension.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 +++++-----
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 14 ++++++++++++--
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 86baa20..d9e09bf 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -139,7 +139,7 @@ static const struct ar9300_eeprom ar9300_default = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0},
+ .future = {0, 0},
.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
@@ -717,7 +717,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0},
+ .future = {0, 0},
.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
@@ -1296,7 +1296,7 @@ static const struct ar9300_eeprom ar9300_h112 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0},
+ .future = {0, 0},
.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
@@ -1875,7 +1875,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0},
+ .future = {0, 0},
.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
@@ -2453,7 +2453,7 @@ static const struct ar9300_eeprom ar9300_h116 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0},
+ .future = {0, 0},
.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 0e5daa5..694ca2e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -270,10 +270,20 @@ struct cal_ctl_data_5g {
u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
} __packed;
+#define MAX_BASE_EXTENSION_FUTURE 2
+
struct ar9300_BaseExtension_1 {
u8 ant_div_control;
- u8 future[3];
- u8 tempslopextension[8];
+ u8 future[MAX_BASE_EXTENSION_FUTURE];
+ /*
+ * misc_enable:
+ *
+ * BIT 0 - TX Gain Cap enable.
+ * BIT 1 - Uncompressed Checksum enable.
+ * BIT 2/3 - MinCCApwr enable 2g/5g.
+ */
+ u8 misc_enable;
+ int8_t tempslopextension[8];
int8_t quick_drop_low;
int8_t quick_drop_high;
} __packed;
--
1.8.5.1
next prev parent reply other threads:[~2013-12-18 4:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-18 4:23 [PATCH v2 00/10] ath9k patches Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 01/10] ath9k: Cleanup spectral scan code Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 02/10] ath9k: Cleanup ath9k.h Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 03/10] ath9k: Remove unneeded ref. count initialization Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 04/10] ath9k: Initialize "switchcomspdt" eeprom field explicitly Sujith Manoharan
2013-12-18 4:23 ` Sujith Manoharan [this message]
2013-12-18 4:23 ` [PATCH v2 06/10] ath9k: Fix regulatory compliance Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 07/10] ath9k: Remove ath9k_hw_gettsf32() Sujith Manoharan
2013-12-18 11:25 ` Felix Fietkau
2013-12-18 11:26 ` Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 08/10] ath9k: Add a delay between RTC reset/clear for AR9003 Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 09/10] ath9k: Fix RTC reset delay Sujith Manoharan
2013-12-18 4:23 ` [PATCH v2 10/10] ath9k: Use a subroutine for the AR9330 reset WAR Sujith Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387340607-20045-6-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).