From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 4/4] ath9k: Initialize QCA953x INI arrays
Date: Mon, 30 Dec 2013 09:46:36 +0530 [thread overview]
Message-ID: <1388376996-614-5-git-send-email-sujith@msujith.org> (raw)
In-Reply-To: <1388376996-614-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 48 +++++++++++++++++++++++++++++-
1 file changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index f3c4102..ec1da0c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -28,6 +28,7 @@
#include "ar9462_2p1_initvals.h"
#include "ar9565_1p0_initvals.h"
#include "ar9565_1p1_initvals.h"
+#include "ar953x_initvals.h"
/* General hardware code for the AR9003 hadware family */
@@ -308,6 +309,31 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
/* Fast clock modal settings */
INIT_INI_ARRAY(&ah->iniModesFastClock,
ar955x_1p0_modes_fast_clock);
+ } else if (AR_SREV_9531(ah)) {
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+ qca953x_1p0_mac_core);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+ qca953x_1p0_mac_postamble);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+ qca953x_1p0_baseband_core);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+ qca953x_1p0_baseband_postamble);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+ qca953x_1p0_radio_core);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+ qca953x_1p0_radio_postamble);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+ qca953x_1p0_soc_preamble);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
+ qca953x_1p0_soc_postamble);
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ qca953x_1p0_common_wo_xlna_rx_gain_table);
+ INIT_INI_ARRAY(&ah->ini_modes_rx_gain_bounds,
+ qca953x_1p0_common_wo_xlna_rx_gain_bounds);
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ qca953x_1p0_modes_no_xpa_tx_gain_table);
+ INIT_INI_ARRAY(&ah->iniModesFastClock,
+ qca953x_1p0_modes_fast_clock);
} else if (AR_SREV_9580(ah)) {
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
@@ -485,6 +511,9 @@ static void ar9003_tx_gain_table_mode0(struct ath_hw *ah)
else if (AR_SREV_9550(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar955x_1p0_modes_xpa_tx_gain_table);
+ else if (AR_SREV_9531(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ qca953x_1p0_modes_xpa_tx_gain_table);
else if (AR_SREV_9580(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9580_1p0_lowest_ob_db_tx_gain_table);
@@ -525,7 +554,14 @@ static void ar9003_tx_gain_table_mode1(struct ath_hw *ah)
else if (AR_SREV_9550(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar955x_1p0_modes_no_xpa_tx_gain_table);
- else if (AR_SREV_9462_21(ah))
+ else if (AR_SREV_9531(ah)) {
+ if (AR_SREV_9531_11(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ qca953x_1p1_modes_no_xpa_tx_gain_table);
+ else
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ qca953x_1p0_modes_no_xpa_tx_gain_table);
+ } else if (AR_SREV_9462_21(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9462_2p1_modes_high_ob_db_tx_gain);
else if (AR_SREV_9462_20(ah))
@@ -699,6 +735,11 @@ static void ar9003_rx_gain_table_mode0(struct ath_hw *ah)
ar955x_1p0_common_rx_gain_table);
INIT_INI_ARRAY(&ah->ini_modes_rx_gain_bounds,
ar955x_1p0_common_rx_gain_bounds);
+ } else if (AR_SREV_9531(ah)) {
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ qca953x_1p0_common_rx_gain_table);
+ INIT_INI_ARRAY(&ah->ini_modes_rx_gain_bounds,
+ qca953x_1p0_common_rx_gain_bounds);
} else if (AR_SREV_9580(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9580_1p0_rx_gain_table);
@@ -744,6 +785,11 @@ static void ar9003_rx_gain_table_mode1(struct ath_hw *ah)
ar955x_1p0_common_wo_xlna_rx_gain_table);
INIT_INI_ARRAY(&ah->ini_modes_rx_gain_bounds,
ar955x_1p0_common_wo_xlna_rx_gain_bounds);
+ } else if (AR_SREV_9531(ah)) {
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ qca953x_1p0_common_wo_xlna_rx_gain_table);
+ INIT_INI_ARRAY(&ah->ini_modes_rx_gain_bounds,
+ qca953x_1p0_common_wo_xlna_rx_gain_bounds);
} else if (AR_SREV_9580(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9580_1p0_wo_xlna_rx_gain_table);
--
1.8.5.2
prev parent reply other threads:[~2013-12-30 4:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-30 4:16 [PATCH 0/4] ath9k patches Sujith Manoharan
2013-12-30 4:16 ` [PATCH 1/4] ath9k: Add version/revision macros for QCA9531 Sujith Manoharan
2013-12-30 4:16 ` [PATCH 2/4] ath9k: Assign macVersion " Sujith Manoharan
2013-12-30 4:16 ` [PATCH 3/4] ath9k: Add QCA953x initvals Sujith Manoharan
2013-12-30 4:16 ` Sujith Manoharan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1388376996-614-5-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).