public inbox for linux-wireless@vger.kernel.org
 help / color / mirror / Atom feed
From: Luca Coelho <luca@coelho.fi>
To: linux-wireless@vger.kernel.org
Cc: johannes@sipsolutions.net, michal.kazior@tieto.com,
	sw@simonwunderlich.de, bzhao@marvell.com, arend@broadcom.com
Subject: [PATCH v7 1/5] cfg80211: refactor cfg80211_can_use_iftype_chan()
Date: Thu, 27 Feb 2014 11:14:53 +0200	[thread overview]
Message-ID: <1393492497-29500-2-git-send-email-luca@coelho.fi> (raw)
In-Reply-To: <1393492497-29500-1-git-send-email-luca@coelho.fi>

From: Luciano Coelho <luciano.coelho@intel.com>

Separate the code that counts the interface types and channels from
the code that check the interface combinations.  The new function that
checks for combinations is exported so it can be called by the
drivers.

This is done in preparation for moving the interface combinations
checks out of cfg80211.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
In v4:

   * rebased on top of slightly modified applied patches
   * removed the parenthesis from the comment (not needed for docbook)
   * use num[NUM_NL80211_IFTYPES] in cfg80211_check_combinations()

In v7:

   * removed redundant arguments (num_interfaces and used_iftypes)
     from cfg80211_check_combinations();
---
 Documentation/DocBook/80211.tmpl |   1 +
 include/net/cfg80211.h           |  22 +++++++
 net/wireless/util.c              | 128 ++++++++++++++++++++++-----------------
 3 files changed, 95 insertions(+), 56 deletions(-)

diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 044b764..d9b9416 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -100,6 +100,7 @@
 !Finclude/net/cfg80211.h wdev_priv
 !Finclude/net/cfg80211.h ieee80211_iface_limit
 !Finclude/net/cfg80211.h ieee80211_iface_combination
+!Finclude/net/cfg80211.h cfg80211_check_combinations
       </chapter>
       <chapter>
       <title>Actions and configuration</title>
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index ff3af16..768fcc0 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4682,6 +4682,28 @@ void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp);
  */
 unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy);
 
+/**
+ * cfg80211_check_combinations - check interface combinations
+ *
+ * @wiphy: the wiphy
+ * @num_different_channels: the number of different channels we want
+ *	to use for verification
+ * @radar_detect: a bitmap where each bit corresponds to a channel
+ *	width where radar detection is needed, as in the definition of
+ *	&struct ieee80211_iface_combination.@radar_detect_widths
+ * @iftype_num: array with the numbers of interfaces of each interface
+ *	type.  The index is the interface type as specified in &enum
+ *	nl80211_iftype.
+ *
+ * This function can be called by the driver to check whether a
+ * combination of interfaces and their types are allowed according to
+ * the interface combinations.
+ */
+int cfg80211_check_combinations(struct wiphy *wiphy,
+				const int num_different_channels,
+				const u8 radar_detect,
+				const int iftype_num[NUM_NL80211_IFTYPES]);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/net/wireless/util.c b/net/wireless/util.c
index dadc934..7ecc0ef 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1253,6 +1253,75 @@ int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
 	return res;
 }
 
+int cfg80211_check_combinations(struct wiphy *wiphy,
+				const int num_different_channels,
+				const u8 radar_detect,
+				const int iftype_num[NUM_NL80211_IFTYPES])
+{
+	int i, j, iftype;
+	int num_interfaces = 0;
+	u32 used_iftypes = 0;
+
+	for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
+		num_interfaces += iftype_num[iftype];
+		if (iftype_num[iftype] > 0)
+			used_iftypes |= BIT(iftype);
+	}
+
+	for (i = 0; i < wiphy->n_iface_combinations; i++) {
+		const struct ieee80211_iface_combination *c;
+		struct ieee80211_iface_limit *limits;
+		u32 all_iftypes = 0;
+
+		c = &wiphy->iface_combinations[i];
+
+		if (num_interfaces > c->max_interfaces)
+			continue;
+		if (num_different_channels > c->num_different_channels)
+			continue;
+
+		limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
+				 GFP_KERNEL);
+		if (!limits)
+			return -ENOMEM;
+
+		for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
+			if (wiphy->software_iftypes & BIT(iftype))
+				continue;
+			for (j = 0; j < c->n_limits; j++) {
+				all_iftypes |= limits[j].types;
+				if (!(limits[j].types & BIT(iftype)))
+					continue;
+				if (limits[j].max < iftype_num[iftype])
+					goto cont;
+				limits[j].max -= iftype_num[iftype];
+			}
+		}
+
+		if (radar_detect && !(c->radar_detect_widths & radar_detect))
+			goto cont;
+
+		/* Finally check that all iftypes that we're currently
+		 * using are actually part of this combination. If they
+		 * aren't then we can't use this combination and have
+		 * to continue to the next.
+		 */
+		if ((all_iftypes & used_iftypes) != used_iftypes)
+			goto cont;
+
+		/* This combination covered all interface types and
+		 * supported the requested numbers, so we're good.
+		 */
+		kfree(limits);
+		return 0;
+ cont:
+		kfree(limits);
+	}
+
+	return -EBUSY;
+}
+EXPORT_SYMBOL(cfg80211_check_combinations);
+
 int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 				 struct wireless_dev *wdev,
 				 enum nl80211_iftype iftype,
@@ -1261,7 +1330,6 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 				 u8 radar_detect)
 {
 	struct wireless_dev *wdev_iter;
-	u32 used_iftypes = BIT(iftype);
 	int num[NUM_NL80211_IFTYPES];
 	struct ieee80211_channel
 			*used_channels[CFG80211_MAX_NUM_DIFFERENT_CHANNELS];
@@ -1269,7 +1337,7 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 	enum cfg80211_chan_mode chmode;
 	int num_different_channels = 0;
 	int total = 1;
-	int i, j;
+	int i;
 
 	ASSERT_RTNL();
 
@@ -1354,65 +1422,13 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 
 		num[wdev_iter->iftype]++;
 		total++;
-		used_iftypes |= BIT(wdev_iter->iftype);
 	}
 
 	if (total == 1 && !radar_detect)
 		return 0;
 
-	for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
-		const struct ieee80211_iface_combination *c;
-		struct ieee80211_iface_limit *limits;
-		u32 all_iftypes = 0;
-
-		c = &rdev->wiphy.iface_combinations[i];
-
-		if (total > c->max_interfaces)
-			continue;
-		if (num_different_channels > c->num_different_channels)
-			continue;
-
-		limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
-				 GFP_KERNEL);
-		if (!limits)
-			return -ENOMEM;
-
-		for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
-			if (rdev->wiphy.software_iftypes & BIT(iftype))
-				continue;
-			for (j = 0; j < c->n_limits; j++) {
-				all_iftypes |= limits[j].types;
-				if (!(limits[j].types & BIT(iftype)))
-					continue;
-				if (limits[j].max < num[iftype])
-					goto cont;
-				limits[j].max -= num[iftype];
-			}
-		}
-
-		if (radar_detect && !(c->radar_detect_widths & radar_detect))
-			goto cont;
-
-		/*
-		 * Finally check that all iftypes that we're currently
-		 * using are actually part of this combination. If they
-		 * aren't then we can't use this combination and have
-		 * to continue to the next.
-		 */
-		if ((all_iftypes & used_iftypes) != used_iftypes)
-			goto cont;
-
-		/*
-		 * This combination covered all interface types and
-		 * supported the requested numbers, so we're good.
-		 */
-		kfree(limits);
-		return 0;
- cont:
-		kfree(limits);
-	}
-
-	return -EBUSY;
+	return cfg80211_check_combinations(&rdev->wiphy, num_different_channels,
+					   radar_detect, num);
 }
 
 int ieee80211_get_ratemask(struct ieee80211_supported_band *sband,
-- 
1.8.5.3


  reply	other threads:[~2014-02-27  9:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-27  9:14 [PATCH v7 0/5] cfg80211/mac80211: move interface combinations check to mac80211 Luca Coelho
2014-02-27  9:14 ` Luca Coelho [this message]
2014-02-27  9:14 ` [PATCH v7 2/5] cfg80211/mac80211: refactor cfg80211_chandef_dfs_required() Luca Coelho
2014-02-27  9:14 ` [PATCH v7 3/5] cfg80211/mac80211: move interface counting for combination check to mac80211 Luca Coelho
2014-03-03 15:17   ` Luca Coelho
2014-02-27  9:14 ` [PATCH v7 4/5] cfg80211/mac80211: move combination check to mac80211 for ibss Luca Coelho
2014-02-27  9:14 ` [PATCH v7 5/5] cfg80211/mac80211: move more combination checks to mac80211 Luca Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393492497-29500-2-git-send-email-luca@coelho.fi \
    --to=luca@coelho.fi \
    --cc=arend@broadcom.com \
    --cc=bzhao@marvell.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=michal.kazior@tieto.com \
    --cc=sw@simonwunderlich.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox