From: Oleksij Rempel <linux@rempel-privat.de>
To: linux-wireless@vger.kernel.org, sujith@msujith.org,
linville@tuxdriver.com
Cc: Oleksij Rempel <linux@rempel-privat.de>
Subject: [PATCH 03/23] ath9k_htc: move beaconq to struct htc_beacon
Date: Sat, 1 Mar 2014 21:15:46 +0100 [thread overview]
Message-ID: <1393704966-13985-4-git-send-email-linux@rempel-privat.de> (raw)
In-Reply-To: <1393704966-13985-1-git-send-email-linux@rempel-privat.de>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
drivers/net/wireless/ath/ath9k/htc.h | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 8 ++++----
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 4 ++--
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index ed41db5..69022b0 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -409,6 +409,7 @@ static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
struct htc_beacon {
struct ieee80211_vif *bslot[ATH9K_HTC_MAX_BCN_VIF];
u32 bmisscnt;
+ u32 beaconq;
};
struct ath_btcoex {
@@ -512,7 +513,6 @@ struct ath9k_htc_priv {
struct work_struct led_work;
#endif
- int beaconq;
int cabq;
int hwq_map[IEEE80211_NUM_ACS];
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 8929050..09ad141 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -26,7 +26,7 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
memset(&qi_be, 0, sizeof(struct ath9k_tx_queue_info));
- ath9k_hw_get_txq_props(ah, priv->beaconq, &qi);
+ ath9k_hw_get_txq_props(ah, priv->beacon.beaconq, &qi);
if (priv->ah->opmode == NL80211_IFTYPE_AP ||
priv->ah->opmode == NL80211_IFTYPE_MESH_POINT) {
@@ -54,11 +54,11 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
}
- if (!ath9k_hw_set_txq_props(ah, priv->beaconq, &qi)) {
+ if (!ath9k_hw_set_txq_props(ah, priv->beacon.beaconq, &qi)) {
ath_err(ath9k_hw_common(ah),
- "Unable to update beacon queue %u!\n", priv->beaconq);
+ "Unable to update beacon queue %u!\n", priv->beacon.beaconq);
} else {
- ath9k_hw_resettxqueue(ah, priv->beaconq);
+ ath9k_hw_resettxqueue(ah, priv->beacon.beaconq);
}
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index b8a0220..6eb19b8 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -405,8 +405,8 @@ static int ath9k_init_queues(struct ath9k_htc_priv *priv)
for (i = 0; i < ARRAY_SIZE(priv->hwq_map); i++)
priv->hwq_map[i] = -1;
- priv->beaconq = ath9k_hw_beaconq_setup(priv->ah);
- if (priv->beaconq == -1) {
+ priv->beacon.beaconq = ath9k_hw_beaconq_setup(priv->ah);
+ if (priv->beacon.beaconq == -1) {
ath_err(common, "Unable to setup BEACON xmit queue\n");
goto err;
}
--
1.9.0
next prev parent reply other threads:[~2014-03-01 20:16 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-01 20:15 [PATCH 00/23] ath9k|ath9k_htc: move dups to common-beacon Oleksij Rempel
2014-03-01 20:15 ` [PATCH 01/23] ath9k: move struct ath_beacon_config to common Oleksij Rempel
2014-03-01 20:15 ` [PATCH 02/23] ath9k_htc: use common ath_beacon_config Oleksij Rempel
2014-03-01 20:15 ` Oleksij Rempel [this message]
2014-03-01 20:15 ` [PATCH 04/23] ath9k_htc: use ath_beacon_conf.enable_beacon Oleksij Rempel
2014-03-01 20:15 ` [PATCH 05/23] ath9k: move sc_flags to ath_common Oleksij Rempel
2014-03-01 20:15 ` [PATCH 06/23] ath9k_htc: use common->op_flags Oleksij Rempel
2014-03-01 20:15 ` [PATCH 07/23] ath9k_htc: add ATH_OP_PRIM_STA_VIF Oleksij Rempel
2014-03-01 20:15 ` [PATCH 08/23] ath9k: remove unused bc_tstamp Oleksij Rempel
2014-03-01 20:15 ` [PATCH 09/23] ath9k_htc: sync beacon slot code with ath9k Oleksij Rempel
2014-03-01 20:15 ` [PATCH 10/23] ath9k: remove unused beacon_qi Oleksij Rempel
2014-03-01 20:15 ` [PATCH 11/23] ath9k|ath9k_htc: move IEEE80211_MS_TO_TU to common Oleksij Rempel
2014-03-01 20:15 ` [PATCH 12/23] ath9k-common: add nexttbtt and intval to ath_beacon_config Oleksij Rempel
2014-03-01 20:15 ` [PATCH 13/23] ath9k: move ath9k_beacon_config_sta to common-beacon Oleksij Rempel
2014-03-01 20:15 ` [PATCH 14/23] ath9k_htc: use ath9k_cmn_beacon_config_sta Oleksij Rempel
2014-03-01 20:15 ` [PATCH 15/23] ath9k: move ath9k_beacon_config_adhoc to common Oleksij Rempel
2014-03-01 20:15 ` [PATCH 16/23] ath9k_htc: add ath9k_htc_beacon_init (but not use it) Oleksij Rempel
2014-03-01 20:16 ` [PATCH 17/23] ath9k_htc: use ath9k_htc_beacon_init in ath9k_htc_beacon_config_ap Oleksij Rempel
2014-03-01 20:16 ` [PATCH 18/23] ath9k_htc: use ath9k_htc_beacon_init in ath9k_htc_beacon_config_adhoc Oleksij Rempel
2014-03-01 20:16 ` [PATCH 19/23] ath9k_htc: use ath9k_cmn_beacon_config_adhoc Oleksij Rempel
2014-03-01 20:16 ` [PATCH 20/23] ath9k: move ath9k_beacon_config_ap common Oleksij Rempel
2014-03-01 20:16 ` [PATCH 21/23] ath9k: remove unused ath9k_get_next_tbtt Oleksij Rempel
2014-03-01 20:16 ` [PATCH 22/23] ath9k_htc: use ath9k_cmn_beacon_config_ap Oleksij Rempel
2014-03-01 20:16 ` [PATCH 23/23] ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init Oleksij Rempel
2014-03-02 2:14 ` [PATCH 00/23] ath9k|ath9k_htc: move dups to common-beacon Sujith Manoharan
2014-03-02 7:27 ` Oleksij Rempel
2014-03-02 7:50 ` Sujith Manoharan
2014-03-06 18:42 ` John W. Linville
2014-03-07 9:55 ` Oleksij Rempel
2014-03-07 10:18 ` Sujith Manoharan
2014-03-10 15:08 ` Oleksij Rempel
2014-03-14 19:22 ` John W. Linville
2014-03-15 7:51 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393704966-13985-4-git-send-email-linux@rempel-privat.de \
--to=linux@rempel-privat.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=sujith@msujith.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).