From: Peter Wu <peter@lekensteyn.nl>
To: Larry Finger <Larry.Finger@lwfinger.net>,
John W Linville <linville@tuxdriver.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chaoming_Li <chaoming_li@realsil.com.cn>,
linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
lekensteyn@gmail.com
Subject: [PATCH v2 1/3] rtlwifi: remove unused allow_all_destaddr functions
Date: Thu, 20 Mar 2014 19:52:22 +0100 [thread overview]
Message-ID: <1395341544-21464-2-git-send-email-peter@lekensteyn.nl> (raw)
In-Reply-To: <1395341544-21464-1-git-send-email-peter@lekensteyn.nl>
Unused as configure_filter takes care of setting/clearing RCR_AAP.
In commit "rtlwifi: rtl8723be: rtl8723com: Remove unused
allow_all_destaddr functions", Larry Finger removed allow_all_destaddr
from the struct. This commit removes the related function too.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
---
- v2: removed functions for rtl8723be too, fix merge conflict due to
a rename in the context of rtl8723ae.
---
drivers/net/wireless/rtlwifi/rtl8188ee/hw.c | 20 --------------------
drivers/net/wireless/rtlwifi/rtl8188ee/hw.h | 2 --
drivers/net/wireless/rtlwifi/rtl8188ee/sw.c | 1 -
drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 21 ---------------------
drivers/net/wireless/rtlwifi/rtl8192ce/hw.h | 2 --
drivers/net/wireless/rtlwifi/rtl8192ce/sw.c | 1 -
drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 20 --------------------
drivers/net/wireless/rtlwifi/rtl8192se/hw.h | 2 --
drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 1 -
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 21 ---------------------
drivers/net/wireless/rtlwifi/rtl8723ae/hw.h | 2 --
drivers/net/wireless/rtlwifi/rtl8723ae/sw.c | 1 -
drivers/net/wireless/rtlwifi/rtl8723be/hw.c | 20 --------------------
drivers/net/wireless/rtlwifi/rtl8723be/hw.h | 2 --
drivers/net/wireless/rtlwifi/wifi.h | 2 --
15 files changed, 118 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index bd2a26b..e655c65 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -2521,23 +2521,3 @@ void rtl88ee_suspend(struct ieee80211_hw *hw)
void rtl88ee_resume(struct ieee80211_hw *hw)
{
}
-
-/* Turn on AAP (RCR:bit 0) for promicuous mode. */
-void rtl88ee_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-
- if (allow_all_da) /* Set BIT0 */
- rtlpci->receive_config |= RCR_AAP;
- else /* Clear BIT0 */
- rtlpci->receive_config &= ~RCR_AAP;
-
- if (write_into_reg)
- rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
-
- RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
- "receive_config = 0x%08X, write_into_reg =%d\n",
- rtlpci->receive_config, write_into_reg);
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.h b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.h
index b4460a4..1850fde 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.h
@@ -61,8 +61,6 @@ void rtl8188ee_bt_reg_init(struct ieee80211_hw *hw);
void rtl8188ee_bt_hw_init(struct ieee80211_hw *hw);
void rtl88ee_suspend(struct ieee80211_hw *hw);
void rtl88ee_resume(struct ieee80211_hw *hw);
-void rtl88ee_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg);
void rtl88ee_fw_clk_off_timer_callback(unsigned long data);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
index 347af1e..41de6f3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
@@ -254,7 +254,6 @@ static struct rtl_hal_ops rtl8188ee_hal_ops = {
.enable_hw_sec = rtl88ee_enable_hw_security_config,
.set_key = rtl88ee_set_key,
.init_sw_leds = rtl88ee_init_sw_leds,
- .allow_all_destaddr = rtl88ee_allow_all_destaddr,
.get_bbreg = rtl88e_phy_query_bb_reg,
.set_bbreg = rtl88e_phy_set_bb_reg,
.get_rfreg = rtl88e_phy_query_rf_reg,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 4ae51d5..e2ba368 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -2423,24 +2423,3 @@ void rtl92ce_suspend(struct ieee80211_hw *hw)
void rtl92ce_resume(struct ieee80211_hw *hw)
{
}
-
-/* Turn on AAP (RCR:bit 0) for promicuous mode. */
-void rtl92ce_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-
- if (allow_all_da) {/* Set BIT0 */
- rtlpci->receive_config |= RCR_AAP;
- } else {/* Clear BIT0 */
- rtlpci->receive_config &= ~RCR_AAP;
- }
-
- if (write_into_reg)
- rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
-
- RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
- "receive_config=0x%08X, write_into_reg=%d\n",
- rtlpci->receive_config, write_into_reg);
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
index 2d063b0..5533070 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
@@ -76,7 +76,5 @@ void rtl8192ce_bt_reg_init(struct ieee80211_hw *hw);
void rtl8192ce_bt_hw_init(struct ieee80211_hw *hw);
void rtl92ce_suspend(struct ieee80211_hw *hw);
void rtl92ce_resume(struct ieee80211_hw *hw);
-void rtl92ce_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
index b790320..12f21f4 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -229,7 +229,6 @@ static struct rtl_hal_ops rtl8192ce_hal_ops = {
.enable_hw_sec = rtl92ce_enable_hw_security_config,
.set_key = rtl92ce_set_key,
.init_sw_leds = rtl92ce_init_sw_leds,
- .allow_all_destaddr = rtl92ce_allow_all_destaddr,
.get_bbreg = rtl92c_phy_query_bb_reg,
.set_bbreg = rtl92c_phy_set_bb_reg,
.set_rfreg = rtl92ce_phy_set_rf_reg,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 3015af1..52a9230 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -2546,23 +2546,3 @@ void rtl92se_resume(struct ieee80211_hw *hw)
pci_write_config_dword(rtlpci->pdev, 0x40,
val & 0xffff00ff);
}
-
-/* Turn on AAP (RCR:bit 0) for promicuous mode. */
-void rtl92se_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-
- if (allow_all_da) /* Set BIT0 */
- rtlpci->receive_config |= RCR_AAP;
- else /* Clear BIT0 */
- rtlpci->receive_config &= ~RCR_AAP;
-
- if (write_into_reg)
- rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
-
- RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
- "receive_config=0x%08X, write_into_reg=%d\n",
- rtlpci->receive_config, write_into_reg);
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.h b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h
index da48aa8..4cacee1 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h
@@ -74,7 +74,5 @@ void rtl92se_set_key(struct ieee80211_hw *hw,
u8 enc_algo, bool is_wepkey, bool clear_all);
void rtl92se_suspend(struct ieee80211_hw *hw);
void rtl92se_resume(struct ieee80211_hw *hw);
-void rtl92se_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 2e8e6f8..1bff2a0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -290,7 +290,6 @@ static struct rtl_hal_ops rtl8192se_hal_ops = {
.enable_hw_sec = rtl92se_enable_hw_security_config,
.set_key = rtl92se_set_key,
.init_sw_leds = rtl92se_init_sw_leds,
- .allow_all_destaddr = rtl92se_allow_all_destaddr,
.get_bbreg = rtl92s_phy_query_bb_reg,
.set_bbreg = rtl92s_phy_set_bb_reg,
.get_rfreg = rtl92s_phy_query_rf_reg,
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index f4c9852..2e27ae3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -2390,24 +2390,3 @@ void rtl8723ae_suspend(struct ieee80211_hw *hw)
void rtl8723ae_resume(struct ieee80211_hw *hw)
{
}
-
-/* Turn on AAP (RCR:bit 0) for promicuous mode. */
-void rtl8723ae_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-
- if (allow_all_da) /* Set BIT0 */
- rtlpci->receive_config |= RCR_AAP;
- else /* Clear BIT0 */
- rtlpci->receive_config &= ~RCR_AAP;
-
- if (write_into_reg)
- rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
-
-
- RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
- "receive_config=0x%08X, write_into_reg=%d\n",
- rtlpci->receive_config, write_into_reg);
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.h b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.h
index 6fa24f7..d3bc39f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.h
@@ -67,7 +67,5 @@ void rtl8723ae_bt_reg_init(struct ieee80211_hw *hw);
void rtl8723ae_bt_hw_init(struct ieee80211_hw *hw);
void rtl8723ae_suspend(struct ieee80211_hw *hw);
void rtl8723ae_resume(struct ieee80211_hw *hw);
-void rtl8723ae_allow_all_destaddr(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg);
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
index 1087a3b..73cba1e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c
@@ -238,7 +238,6 @@ static struct rtl_hal_ops rtl8723ae_hal_ops = {
.enable_hw_sec = rtl8723ae_enable_hw_security_config,
.set_key = rtl8723ae_set_key,
.init_sw_leds = rtl8723ae_init_sw_leds,
- .allow_all_destaddr = rtl8723ae_allow_all_destaddr,
.get_bbreg = rtl8723_phy_query_bb_reg,
.set_bbreg = rtl8723_phy_set_bb_reg,
.get_rfreg = rtl8723ae_phy_query_rf_reg,
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
index 7e70c71..6d8fe50 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -2505,23 +2505,3 @@ void rtl8723be_suspend(struct ieee80211_hw *hw)
void rtl8723be_resume(struct ieee80211_hw *hw)
{
}
-
-/* Turn on AAP (RCR:bit 0) for promicuous mode. */
-void rtl8723be_allow_all_destaddr(struct ieee80211_hw *hw, bool allow_all_da,
- bool write_into_reg)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-
- if (allow_all_da) /* Set BIT0 */
- rtlpci->receive_config |= RCR_AAP;
- else /* Clear BIT0 */
- rtlpci->receive_config &= ~RCR_AAP;
-
- if (write_into_reg)
- rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
-
- RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
- "receive_config = 0x%08X, write_into_reg =%d\n",
- rtlpci->receive_config, write_into_reg);
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.h b/drivers/net/wireless/rtlwifi/rtl8723be/hw.h
index b7449a9..64c7551 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.h
@@ -59,6 +59,4 @@ void rtl8723be_bt_reg_init(struct ieee80211_hw *hw);
void rtl8723be_bt_hw_init(struct ieee80211_hw *hw);
void rtl8723be_suspend(struct ieee80211_hw *hw);
void rtl8723be_resume(struct ieee80211_hw *hw);
-void rtl8723be_allow_all_destaddr(struct ieee80211_hw *hw, bool allow_all_da,
- bool write_into_reg);
#endif
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 6965afd..903874c 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1960,8 +1960,6 @@ struct rtl_hal_ops {
u32 regaddr, u32 bitmask);
void (*set_rfreg) (struct ieee80211_hw *hw, enum radio_path rfpath,
u32 regaddr, u32 bitmask, u32 data);
- void (*allow_all_destaddr)(struct ieee80211_hw *hw,
- bool allow_all_da, bool write_into_reg);
void (*linked_set_reg) (struct ieee80211_hw *hw);
void (*chk_switch_dmdp) (struct ieee80211_hw *hw);
void (*dualmac_easy_concurrent) (struct ieee80211_hw *hw);
--
1.9.1
next prev parent reply other threads:[~2014-03-20 18:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-20 18:52 [PATCH 0/3] rtlwifi (and staging rtl8821ae) cleanups Peter Wu
2014-03-20 18:52 ` Peter Wu [this message]
2014-03-20 18:52 ` [PATCH 2/3] staging/rtl8821ae: avoid accessing RCR directly Peter Wu
2014-03-20 18:52 ` [PATCH 3/3] staging/rtl8821ae: remove unused allow_all_destaddr function Peter Wu
2014-03-20 19:48 ` [PATCH 0/3] rtlwifi (and staging rtl8821ae) cleanups Larry Finger
2014-03-20 20:05 ` Greg Kroah-Hartman
2014-03-20 21:01 ` Peter Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395341544-21464-2-git-send-email-peter@lekensteyn.nl \
--to=peter@lekensteyn.nl \
--cc=Larry.Finger@lwfinger.net \
--cc=chaoming_li@realsil.com.cn \
--cc=gregkh@linuxfoundation.org \
--cc=lekensteyn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox