From: Antonio Quartulli <antonio@meshcoding.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: b.a.t.m.a.n@lists.open-mesh.org, linux-wireless@vger.kernel.org,
devel@lists.open80211s.org,
Antonio Quartulli <antonio@open-mesh.com>
Subject: [RFCv2 6/6] cfg80211: implement cfg80211_get_station cfg80211 API
Date: Sun, 30 Mar 2014 22:35:04 +0200 [thread overview]
Message-ID: <1396211704-4677-7-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1396211704-4677-1-git-send-email-antonio@meshcoding.com>
From: Antonio Quartulli <antonio@open-mesh.com>
Implement and export the new cfg80211_get_station() API.
This utility can be used by other kernel modules to obtain
detailed information about a given wireless station.
It will be in particular useful to batman-adv which will
implement a wireless rate based metric.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
---
include/net/cfg80211.h | 11 +++++++++++
net/wireless/util.c | 18 ++++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4c8ebe9..45062aa 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1065,6 +1065,17 @@ struct station_info {
};
/**
+ * cfg80211_get_station - retrieve information about a given station
+ * @dev: the device where the station is supposed to be connected to
+ * @mac_addr: the mac address of the station of interest
+ * @sinfo: pointer to the structure to fill with the information
+ *
+ * Returns 0 on success or a negative error code otherwise.
+ */
+int cfg80211_get_station(struct net_device *dev, u8 *mac_addr,
+ struct station_info *sinfo);
+
+/**
* enum monitor_flags - monitor flags
*
* Monitor interface configuration flags. Note that these must be the bits
diff --git a/net/wireless/util.c b/net/wireless/util.c
index c5d0208..c691cf8 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1482,6 +1482,24 @@ unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy)
}
EXPORT_SYMBOL(ieee80211_get_num_supported_channels);
+int cfg80211_get_station(struct net_device *dev, u8 *mac_addr,
+ struct station_info *sinfo)
+{
+ struct cfg80211_registered_device *rdev;
+ struct wireless_dev *wdev;
+
+ wdev = dev->ieee80211_ptr;
+ if (!wdev)
+ return -EOPNOTSUPP;
+
+ rdev = wiphy_to_dev(wdev->wiphy);
+ if (!rdev->ops->get_station)
+ return -EOPNOTSUPP;
+
+ return rdev_get_station(rdev, dev, mac_addr, sinfo);
+}
+EXPORT_SYMBOL(cfg80211_get_station);
+
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
const unsigned char rfc1042_header[] __aligned(2) =
--
1.8.3.2
next prev parent reply other threads:[~2014-03-30 20:35 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-30 20:34 [RFCv2 0/6] Export the expected throughput Antonio Quartulli
2014-03-30 20:34 ` [RFCv2 1/6] cfg80211: export expected throughput through get_station() Antonio Quartulli
2014-03-31 8:22 ` [B.A.T.M.A.N.] " Andrew Lunn
2014-03-31 8:46 ` Antonio Quartulli
2014-04-08 10:03 ` Johannes Berg
2014-04-10 16:22 ` Antonio Quartulli
2014-03-30 20:35 ` [RFCv2 2/6] mac80211: add new RC API to retrieve expected throughput Antonio Quartulli
2014-04-08 10:03 ` Johannes Berg
2014-04-10 15:46 ` Antonio Quartulli
2014-04-10 17:13 ` Johannes Berg
2014-04-11 7:03 ` Antonio Quartulli
2014-04-08 10:04 ` Johannes Berg
2014-04-10 15:53 ` Antonio Quartulli
2014-04-10 17:14 ` Johannes Berg
2014-04-11 11:30 ` Antonio Quartulli
2014-03-30 20:35 ` [RFCv2 3/6] mac80211: export expected throughput in set_sta_info() Antonio Quartulli
2014-03-30 20:35 ` [RFCv2 4/6] mac80211: minstrel - implement get_expected_throughput() API Antonio Quartulli
2014-03-31 8:49 ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-08 10:05 ` Johannes Berg
2014-04-10 15:54 ` Antonio Quartulli
2014-03-30 20:35 ` [RFCv2 5/6] mac80211: minstrel_ht " Antonio Quartulli
2014-03-30 20:35 ` Antonio Quartulli [this message]
2014-04-08 10:06 ` [RFCv2 6/6] cfg80211: implement cfg80211_get_station cfg80211 API Johannes Berg
2014-04-10 16:02 ` Antonio Quartulli
2014-04-10 17:12 ` Johannes Berg
2014-04-11 7:04 ` Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396211704-4677-7-git-send-email-antonio@meshcoding.com \
--to=antonio@meshcoding.com \
--cc=antonio@open-mesh.com \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=devel@lists.open80211s.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).