From: Emmanuel Grumbach <egrumbach@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Avri Altman <avri.altman@intel.com>,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 01/47] iwlwifi: mvm: Handle power management constraints for additional use-cases
Date: Sun, 13 Apr 2014 22:19:16 +0300 [thread overview]
Message-ID: <1397416802-32403-1-git-send-email-egrumbach@gmail.com> (raw)
In-Reply-To: <534AE330.2020805@gmail.com>
From: Avri Altman <avri.altman@intel.com>
Today, the driver logic looks for the conditions to disable
power management albeit power management should be enabled
in a very few distinct cases.
This patch changes the driver logic to enable power
management once the required conditions met.
While at it, make some housekeeping and support a few
additional use cases:
a) Add support for a standalone p2p client:
Power management should be enabled for a P2P client
MAC only if the firmware supports it (TLV flag is set).
Instead we used the DCM flag, therefore we didn't cover
use cases that did not include the DCM flag.
b) Add support to Same-Channel-Mode (SCM):
If both clients share the same channel (SCM), and there
are no other active vifs in the system, power management
should be enabled only if the firmware supports this
(TLV flag is set).
c) Fix power management logic for GO/AP:
Today, when we detect an active GO / AP MAC - we disable
power management for all the vifs altogether.
Actually, the correct behavior is to enable power
management on a client if on a different channel
(based on the firmware capabilities).
d) Housekeeping - Along with that, this patch includes some
code-reorganizing: Today the logic of disabling power is
scattered across several functions, specifically in the
iterator. For the sake of both readability and
scalability, we moved this logic to its applicable
function, leaving the iterator gather information only.
Furthermore, as power management is a MAC-related
attribute, we moved the power management member to the
iwl_mvm_vif structure.
Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-fw.h | 5 +
drivers/net/wireless/iwlwifi/mvm/mvm.h | 4 +-
drivers/net/wireless/iwlwifi/mvm/power.c | 193 ++++++++++++++++++-------------
3 files changed, 117 insertions(+), 85 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index d14f193..de70919 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -92,8 +92,11 @@
* @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API
* @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command
* containing CAM (Continuous Active Mode) indication.
+ * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
* @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
* P2P client interfaces simultaneously if they are in different bindings.
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
+ * P2P client interfaces simultaneously if they are in same bindings.
* @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
* @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
* @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
@@ -118,7 +121,9 @@ enum iwl_ucode_tlv_flag {
IWL_UCODE_TLV_FLAGS_SCHED_SCAN = BIT(17),
IWL_UCODE_TLV_FLAGS_STA_KEY_CMD = BIT(19),
IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD = BIT(20),
+ IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21),
IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22),
+ IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23),
IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index d564233..b032511 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -265,6 +265,7 @@ struct iwl_mvm_vif_bf_data {
* @uploaded: indicates the MAC context has been added to the device
* @ap_ibss_active: indicates that AP/IBSS is configured and that the interface
* should get quota etc.
+ * @pm_enabled - Indicate if MAC power management is allowed
* @monitor_active: indicates that monitor context is configured, and that the
* interface should get quota etc.
* @low_latency: indicates that this interface is in low-latency mode
@@ -283,6 +284,7 @@ struct iwl_mvm_vif {
bool uploaded;
bool ap_ibss_active;
+ bool pm_enabled;
bool monitor_active;
bool low_latency;
struct iwl_mvm_vif_bf_data bf_data;
@@ -629,8 +631,6 @@ struct iwl_mvm {
/* Indicate if device power save is allowed */
bool ps_disabled;
- /* Indicate if device power management is allowed */
- bool pm_disabled;
};
/* Extract MVM priv from op_mode and _hw */
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 6b636ea..a1ce8d2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -309,7 +309,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
cmd->flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
#endif
if (!vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif) ||
- mvm->pm_disabled)
+ !mvmvif->pm_enabled)
return;
cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK);
@@ -421,13 +421,6 @@ static int iwl_mvm_power_send_cmd(struct iwl_mvm *mvm,
{
struct iwl_mac_power_cmd cmd = {};
- if (vif->type != NL80211_IFTYPE_STATION)
- return 0;
-
- if (vif->p2p &&
- !(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM))
- return 0;
-
iwl_mvm_power_build_cmd(mvm, vif, &cmd);
iwl_mvm_power_log(mvm, &cmd);
#ifdef CONFIG_IWLWIFI_DEBUGFS
@@ -508,86 +501,69 @@ int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
return 0;
}
-struct iwl_power_constraint {
+struct iwl_power_vifs {
struct ieee80211_vif *bf_vif;
struct ieee80211_vif *bss_vif;
struct ieee80211_vif *p2p_vif;
- u16 bss_phyctx_id;
- u16 p2p_phyctx_id;
- bool pm_disabled;
- bool ps_disabled;
- struct iwl_mvm *mvm;
+ struct ieee80211_vif *ap_vif;
+ struct ieee80211_vif *monitor_vif;
+ bool p2p_active;
+ bool bss_active;
+ bool ap_active;
+ bool monitor_active;
};
static void iwl_mvm_power_iterator(void *_data, u8 *mac,
struct ieee80211_vif *vif)
{
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
- struct iwl_power_constraint *power_iterator = _data;
- struct iwl_mvm *mvm = power_iterator->mvm;
+ struct iwl_power_vifs *power_iterator = _data;
+ mvmvif->pm_enabled = false;
switch (ieee80211_vif_type_p2p(vif)) {
case NL80211_IFTYPE_P2P_DEVICE:
break;
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_AP:
- /* no BSS power mgmt if we have an active AP */
- if (mvmvif->ap_ibss_active)
- power_iterator->pm_disabled = true;
+ /* only a single MAC of the same type */
+ WARN_ON(power_iterator->ap_vif);
+ power_iterator->ap_vif = vif;
+ if (mvmvif->phy_ctxt)
+ if (mvmvif->phy_ctxt->id < MAX_PHYS)
+ power_iterator->ap_active = true;
break;
case NL80211_IFTYPE_MONITOR:
- /* no BSS power mgmt and no device power save */
- power_iterator->pm_disabled = true;
- power_iterator->ps_disabled = true;
+ /* only a single MAC of the same type */
+ WARN_ON(power_iterator->monitor_vif);
+ power_iterator->monitor_vif = vif;
+ if (mvmvif->phy_ctxt)
+ if (mvmvif->phy_ctxt->id < MAX_PHYS)
+ power_iterator->monitor_active = true;
break;
case NL80211_IFTYPE_P2P_CLIENT:
- if (mvmvif->phy_ctxt)
- power_iterator->p2p_phyctx_id = mvmvif->phy_ctxt->id;
-
- /* we should have only one P2P vif */
+ /* only a single MAC of the same type */
WARN_ON(power_iterator->p2p_vif);
power_iterator->p2p_vif = vif;
-
- IWL_DEBUG_POWER(mvm, "p2p: p2p_id=%d, bss_id=%d\n",
- power_iterator->p2p_phyctx_id,
- power_iterator->bss_phyctx_id);
- if (!(mvm->fw->ucode_capa.flags &
- IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM)) {
- /* no BSS power mgmt if we have a P2P client*/
- power_iterator->pm_disabled = true;
- } else if (power_iterator->p2p_phyctx_id < MAX_PHYS &&
- power_iterator->bss_phyctx_id < MAX_PHYS &&
- power_iterator->p2p_phyctx_id ==
- power_iterator->bss_phyctx_id) {
- power_iterator->pm_disabled = true;
- }
+ if (mvmvif->phy_ctxt)
+ if (mvmvif->phy_ctxt->id < MAX_PHYS)
+ power_iterator->p2p_active = true;
break;
case NL80211_IFTYPE_STATION:
- if (mvmvif->phy_ctxt)
- power_iterator->bss_phyctx_id = mvmvif->phy_ctxt->id;
-
- /* we should have only one BSS vif */
+ /* only a single MAC of the same type */
WARN_ON(power_iterator->bss_vif);
power_iterator->bss_vif = vif;
+ if (mvmvif->phy_ctxt)
+ if (mvmvif->phy_ctxt->id < MAX_PHYS)
+ power_iterator->bss_active = true;
if (mvmvif->bf_data.bf_enabled &&
!WARN_ON(power_iterator->bf_vif))
power_iterator->bf_vif = vif;
- IWL_DEBUG_POWER(mvm, "bss: p2p_id=%d, bss_id=%d\n",
- power_iterator->p2p_phyctx_id,
- power_iterator->bss_phyctx_id);
- if (mvm->fw->ucode_capa.flags &
- IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM &&
- (power_iterator->p2p_phyctx_id < MAX_PHYS &&
- power_iterator->bss_phyctx_id < MAX_PHYS &&
- power_iterator->p2p_phyctx_id ==
- power_iterator->bss_phyctx_id))
- power_iterator->pm_disabled = true;
break;
default:
@@ -596,29 +572,75 @@ static void iwl_mvm_power_iterator(void *_data, u8 *mac,
}
static void
-iwl_mvm_power_get_global_constraint(struct iwl_mvm *mvm,
- struct iwl_power_constraint *constraint)
+iwl_mvm_power_set_pm(struct iwl_mvm *mvm,
+ struct iwl_power_vifs *vifs)
{
- lockdep_assert_held(&mvm->mutex);
+ struct iwl_mvm_vif *bss_mvmvif = NULL;
+ struct iwl_mvm_vif *p2p_mvmvif = NULL;
+ struct iwl_mvm_vif *ap_mvmvif = NULL;
+ bool client_same_channel = false;
+ bool ap_same_channel = false;
- if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM) {
- constraint->pm_disabled = true;
- constraint->ps_disabled = true;
- }
+ lockdep_assert_held(&mvm->mutex);
+ /* get vifs info + set pm_enable to false */
ieee80211_iterate_active_interfaces_atomic(mvm->hw,
IEEE80211_IFACE_ITER_NORMAL,
- iwl_mvm_power_iterator, constraint);
+ iwl_mvm_power_iterator, vifs);
+
+ if (vifs->bss_vif)
+ bss_mvmvif = iwl_mvm_vif_from_mac80211(vifs->bss_vif);
+
+ if (vifs->p2p_vif)
+ p2p_mvmvif = iwl_mvm_vif_from_mac80211(vifs->p2p_vif);
+
+ if (vifs->ap_vif)
+ ap_mvmvif = iwl_mvm_vif_from_mac80211(vifs->ap_vif);
+
+ /* enable PM on bss if bss stand alone */
+ if (vifs->bss_active && !vifs->p2p_active && !vifs->ap_active) {
+ bss_mvmvif->pm_enabled = true;
+ return;
+ }
+
+ /* enable PM on p2p if p2p stand alone */
+ if (vifs->p2p_active && !vifs->bss_active && !vifs->ap_active) {
+ if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PM)
+ p2p_mvmvif->pm_enabled = true;
+ return;
+ }
+
+ if (vifs->bss_active && vifs->p2p_active)
+ client_same_channel = (bss_mvmvif->phy_ctxt->id ==
+ p2p_mvmvif->phy_ctxt->id);
+ if (vifs->bss_active && vifs->ap_active)
+ ap_same_channel = (bss_mvmvif->phy_ctxt->id ==
+ ap_mvmvif->phy_ctxt->id);
+
+ /* bss is not stand alone: enable PM if alone on its channel */
+ if (vifs->bss_active && !(client_same_channel || ap_same_channel) &&
+ (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM)) {
+ bss_mvmvif->pm_enabled = true;
+ return;
+ }
+
+ /*
+ * There is only one channel in the system and there are only
+ * bss and p2p clients that share it
+ */
+ if (client_same_channel && !vifs->ap_active &&
+ (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM)) {
+ /* share same channel*/
+ bss_mvmvif->pm_enabled = true;
+ if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PM)
+ p2p_mvmvif->pm_enabled = true;
+ }
}
int iwl_mvm_power_update_mac(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
{
- struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
- struct iwl_power_constraint constraint = {
- .p2p_phyctx_id = MAX_PHYS,
- .bss_phyctx_id = MAX_PHYS,
- .mvm = mvm,
- };
+ struct iwl_mvm_vif *mvmvif;
+ struct iwl_power_vifs vifs = {};
bool ba_enable;
int ret;
@@ -627,39 +649,44 @@ int iwl_mvm_power_update_mac(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT))
return 0;
- iwl_mvm_power_get_global_constraint(mvm, &constraint);
- mvm->ps_disabled = constraint.ps_disabled;
- mvm->pm_disabled = constraint.pm_disabled;
+ iwl_mvm_power_set_pm(mvm, &vifs);
+ /* disable PS if CAM */
+ if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM) {
+ mvm->ps_disabled = true;
+ } else {
/* don't update device power state unless we add / remove monitor */
- if (vif->type == NL80211_IFTYPE_MONITOR) {
- ret = iwl_mvm_power_update_device(mvm);
- if (ret)
- return ret;
+ if (vifs.monitor_vif) {
+ if (vifs.monitor_active)
+ mvm->ps_disabled = true;
+ ret = iwl_mvm_power_update_device(mvm);
+ if (ret)
+ return ret;
+ }
}
- if (constraint.bss_vif) {
- ret = iwl_mvm_power_send_cmd(mvm, constraint.bss_vif);
+ if (vifs.bss_vif) {
+ ret = iwl_mvm_power_send_cmd(mvm, vifs.bss_vif);
if (ret)
return ret;
}
- if (constraint.p2p_vif) {
- ret = iwl_mvm_power_send_cmd(mvm, constraint.p2p_vif);
+ if (vifs.p2p_vif) {
+ ret = iwl_mvm_power_send_cmd(mvm, vifs.p2p_vif);
if (ret)
return ret;
}
- if (!constraint.bf_vif)
+ if (!vifs.bf_vif)
return 0;
- vif = constraint.bf_vif;
+ vif = vifs.bf_vif;
mvmvif = iwl_mvm_vif_from_mac80211(vif);
- ba_enable = !(constraint.pm_disabled || constraint.ps_disabled ||
+ ba_enable = !(!mvmvif->pm_enabled || mvm->ps_disabled ||
!vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif));
- return iwl_mvm_update_beacon_abort(mvm, constraint.bf_vif, ba_enable);
+ return iwl_mvm_update_beacon_abort(mvm, vifs.bf_vif, ba_enable);
}
#ifdef CONFIG_IWLWIFI_DEBUGFS
--
1.8.3.2
next prev parent reply other threads:[~2014-04-13 19:20 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-13 19:19 pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-13 19:19 ` Emmanuel Grumbach [this message]
2014-04-13 19:19 ` [PATCH 02/47] iwlwifi: mvm: fix the number of channels in family 8000 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 03/47] iwlwifi: pcie: don't leave the new NICs awake for commands Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 04/47] iwlwifi: mvm: add lq_cmd/tx_resp reduced_tpc field Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 05/47] iwlwifi: mvm: add ATPC implementation Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 06/47] iwlwifi: mvm: add debugfs file for fixed reduced tx power Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 07/47] iwlwifi: pcie: implement GRO without NAPI Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 08/47] iwlwifi: pcie: clarify RX queue need_update handling and locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 09/47] iwlwifi: pcie: use bool for TX queue where appropriate Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 10/47] iwlwifi: pcie: fix TX queue locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 11/47] iwlwifi: pcie: clarify TX queue need_update handling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 12/47] iwlwifi: pcie: unify iwl_rx_replenish and iwl_rx_replenish_now Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 13/47] iwlwifi: move CPU1_CPU2_SEPARATOR_SECTION to iwl-fw.h Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 14/47] iwlwifi: mvm: remove redundant empty line Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 15/47] iwlwifi: mvm: propagate the beamforming status from firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 16/47] iwlwifi: mvm: don't set AP STA to EINVAL Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 17/47] iwlwifi: allow to wait for a subset of the queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 18/47] iwlwifi: pcie: WARN upon traffic while flushing TX queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 19/47] iwlwifi: mvm: dump Rx FIFO when the firmware asserts Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 20/47] iwlwifi: mvm: Fix warning message when exit thermal throttling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 21/47] iwlwifi: mvm: Fix tx-backoff when NIC " Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 22/47] iwlwifi: mvm: don't enable bcast filtering on P2P client Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 23/47] iwlwifi: mvm: Use RCU_INIT_POINTER(x, NULL) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 24/47] iwlwifi: mvm: add per rate tx stats Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 25/47] iwlwifi: mvm: replace BUG_ON by WARN_ON in scan.c Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 26/47] iwlwifi: mvm: deprecate -7 firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 27/47] iwlwifi: mvm: Change scan fragmentation condition Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 28/47] iwlwifi: mvm: Fix scan parameters units Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 29/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_NEWBT_COEX TLV flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 30/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 31/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_RX_ENERGY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 32/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 33/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_BF_UPDATED flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 34/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 35/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_SCHED_SCAN flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 36/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 37/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_STA_KEY_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 38/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 39/47] iwlwifi: mvm: BT Coex - don't use comma operator Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 40/47] iwlwifi: mvm: BT Coex - minor API change Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 41/47] iwlwifi: mvm: BT Coex - send priority tables from iwl_send_bt_init_conf Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 42/47] iwlwifi: mvm: Add support for Energy based scan (EBS) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 43/47] iwlwifi: 7000: bump firmware API version to 9 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 44/47] iwlwifi: mvm: don't use d3 fw if d0i3 is used Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 45/47] iwlwifi: mvm: replace leading spaces by tabs Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 46/47] iwlwifi: mvm: Re-factor enabling uAPSD logic Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 47/47] iwlwifi: don't disable SCD chain extension on newer devices Emmanuel Grumbach
2014-04-13 19:25 ` pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-22 20:07 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397416802-32403-1-git-send-email-egrumbach@gmail.com \
--to=egrumbach@gmail.com \
--cc=avri.altman@intel.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).