From: Emmanuel Grumbach <egrumbach@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 29/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_NEWBT_COEX TLV flag
Date: Sun, 13 Apr 2014 22:19:44 +0300 [thread overview]
Message-ID: <1397416802-32403-29-git-send-email-egrumbach@gmail.com> (raw)
In-Reply-To: <534AE330.2020805@gmail.com>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
All the supported firmwares have this flag set.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-fw.h | 1 -
drivers/net/wireless/iwlwifi/mvm/coex.c | 9 ---------
2 files changed, 10 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index f7ea9c0..9cb4ad9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -107,7 +107,6 @@ enum iwl_ucode_tlv_flag {
IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
- IWL_UCODE_TLV_FLAGS_NEWBT_COEX = BIT(5),
IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT = BIT(6),
IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
IWL_UCODE_TLV_FLAGS_RX_ENERGY_API = BIT(8),
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 4bd47c9..92a005c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -106,9 +106,6 @@ static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
int iwl_send_bt_prio_tbl(struct iwl_mvm *mvm)
{
- if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
- return 0;
-
return iwl_mvm_send_cmd_pdu(mvm, BT_COEX_PRIO_TABLE, CMD_SYNC,
sizeof(struct iwl_bt_coex_prio_tbl_cmd),
&iwl_bt_prio_tbl);
@@ -573,9 +570,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
int ret;
u32 flags;
- if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
- return 0;
-
bt_cmd = kzalloc(sizeof(*bt_cmd), GFP_KERNEL);
if (!bt_cmd)
return -ENOMEM;
@@ -1260,9 +1254,6 @@ u8 iwl_mvm_bt_coex_tx_prio(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr,
void iwl_mvm_bt_coex_vif_change(struct iwl_mvm *mvm)
{
- if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWBT_COEX))
- return;
-
iwl_mvm_bt_coex_notif_handle(mvm);
}
--
1.8.3.2
next prev parent reply other threads:[~2014-04-13 19:20 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-13 19:19 pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 01/47] iwlwifi: mvm: Handle power management constraints for additional use-cases Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 02/47] iwlwifi: mvm: fix the number of channels in family 8000 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 03/47] iwlwifi: pcie: don't leave the new NICs awake for commands Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 04/47] iwlwifi: mvm: add lq_cmd/tx_resp reduced_tpc field Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 05/47] iwlwifi: mvm: add ATPC implementation Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 06/47] iwlwifi: mvm: add debugfs file for fixed reduced tx power Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 07/47] iwlwifi: pcie: implement GRO without NAPI Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 08/47] iwlwifi: pcie: clarify RX queue need_update handling and locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 09/47] iwlwifi: pcie: use bool for TX queue where appropriate Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 10/47] iwlwifi: pcie: fix TX queue locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 11/47] iwlwifi: pcie: clarify TX queue need_update handling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 12/47] iwlwifi: pcie: unify iwl_rx_replenish and iwl_rx_replenish_now Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 13/47] iwlwifi: move CPU1_CPU2_SEPARATOR_SECTION to iwl-fw.h Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 14/47] iwlwifi: mvm: remove redundant empty line Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 15/47] iwlwifi: mvm: propagate the beamforming status from firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 16/47] iwlwifi: mvm: don't set AP STA to EINVAL Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 17/47] iwlwifi: allow to wait for a subset of the queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 18/47] iwlwifi: pcie: WARN upon traffic while flushing TX queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 19/47] iwlwifi: mvm: dump Rx FIFO when the firmware asserts Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 20/47] iwlwifi: mvm: Fix warning message when exit thermal throttling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 21/47] iwlwifi: mvm: Fix tx-backoff when NIC " Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 22/47] iwlwifi: mvm: don't enable bcast filtering on P2P client Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 23/47] iwlwifi: mvm: Use RCU_INIT_POINTER(x, NULL) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 24/47] iwlwifi: mvm: add per rate tx stats Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 25/47] iwlwifi: mvm: replace BUG_ON by WARN_ON in scan.c Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 26/47] iwlwifi: mvm: deprecate -7 firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 27/47] iwlwifi: mvm: Change scan fragmentation condition Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 28/47] iwlwifi: mvm: Fix scan parameters units Emmanuel Grumbach
2014-04-13 19:19 ` Emmanuel Grumbach [this message]
2014-04-13 19:19 ` [PATCH 30/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 31/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_RX_ENERGY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 32/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 33/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_BF_UPDATED flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 34/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 35/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_SCHED_SCAN flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 36/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 37/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_STA_KEY_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 38/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 39/47] iwlwifi: mvm: BT Coex - don't use comma operator Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 40/47] iwlwifi: mvm: BT Coex - minor API change Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 41/47] iwlwifi: mvm: BT Coex - send priority tables from iwl_send_bt_init_conf Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 42/47] iwlwifi: mvm: Add support for Energy based scan (EBS) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 43/47] iwlwifi: 7000: bump firmware API version to 9 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 44/47] iwlwifi: mvm: don't use d3 fw if d0i3 is used Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 45/47] iwlwifi: mvm: replace leading spaces by tabs Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 46/47] iwlwifi: mvm: Re-factor enabling uAPSD logic Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 47/47] iwlwifi: don't disable SCD chain extension on newer devices Emmanuel Grumbach
2014-04-13 19:25 ` pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-22 20:07 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397416802-32403-29-git-send-email-egrumbach@gmail.com \
--to=egrumbach@gmail.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).