From: Emmanuel Grumbach <egrumbach@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 03/47] iwlwifi: pcie: don't leave the new NICs awake for commands
Date: Sun, 13 Apr 2014 22:19:18 +0300 [thread overview]
Message-ID: <1397416802-32403-3-git-send-email-egrumbach@gmail.com> (raw)
In-Reply-To: <534AE330.2020805@gmail.com>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
A hardware bug had been discovered on 7260 / 3160 and 7265
and the workaround for this bug is to force the NIC to stay
awake as long as we have host commands in flight. This
workaround has been introduced for all NICs in a previous
patch:
b9439491055a ("iwlwifi: pcie: keep the NIC awake when commands are in flight")
In newer NICs, this bug is solved, so we can let the NIC go
to sleep even when we send commands. The hardware will wake
up when we increment the scheduler write pointer.
Make the workaround conditional to only use it on affected
hardware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-7000.c | 1 +
drivers/net/wireless/iwlwifi/iwl-config.h | 3 +++
drivers/net/wireless/iwlwifi/pcie/tx.c | 9 ++++++---
3 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 003a546..c42d80c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -107,6 +107,7 @@ static const struct iwl_base_params iwl7000_base_params = {
.max_event_log_size = 512,
.shadow_reg_enable = true,
.pcie_l1_allowed = true,
+ .apmg_wake_up_wa = true,
};
static const struct iwl_ht_params iwl7000_ht_params = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 3f17dc3..8c16730 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -146,6 +146,8 @@ static inline u8 num_of_ant(u8 mask)
* @wd_timeout: TX queues watchdog timeout
* @max_event_log_size: size of event log buffer size for ucode event logging
* @shadow_reg_enable: HW shadow register support
+ * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command
+ * is in flight. This is due to a HW bug in 7260, 3160 and 7265.
*/
struct iwl_base_params {
int eeprom_size;
@@ -160,6 +162,7 @@ struct iwl_base_params {
u32 max_event_log_size;
const bool shadow_reg_enable;
const bool pcie_l1_allowed;
+ const bool apmg_wake_up_wa;
};
/*
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 3b0c72c..0368609 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1028,7 +1028,8 @@ static void iwl_pcie_cmdq_reclaim(struct iwl_trans *trans, int txq_id, int idx)
}
}
- if (q->read_ptr == q->write_ptr) {
+ if (trans->cfg->base_params->apmg_wake_up_wa &&
+ q->read_ptr == q->write_ptr) {
spin_lock_irqsave(&trans_pcie->reg_lock, flags);
WARN_ON(!trans_pcie->cmd_in_flight);
trans_pcie->cmd_in_flight = false;
@@ -1405,9 +1406,11 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
/*
* wake up the NIC to make sure that the firmware will see the host
* command - we will let the NIC sleep once all the host commands
- * returned.
+ * returned. This needs to be done only on NICs that have
+ * apmg_wake_up_wa set.
*/
- if (!trans_pcie->cmd_in_flight) {
+ if (trans->cfg->base_params->apmg_wake_up_wa &&
+ !trans_pcie->cmd_in_flight) {
trans_pcie->cmd_in_flight = true;
__iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
--
1.8.3.2
next prev parent reply other threads:[~2014-04-13 19:20 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-13 19:19 pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 01/47] iwlwifi: mvm: Handle power management constraints for additional use-cases Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 02/47] iwlwifi: mvm: fix the number of channels in family 8000 Emmanuel Grumbach
2014-04-13 19:19 ` Emmanuel Grumbach [this message]
2014-04-13 19:19 ` [PATCH 04/47] iwlwifi: mvm: add lq_cmd/tx_resp reduced_tpc field Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 05/47] iwlwifi: mvm: add ATPC implementation Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 06/47] iwlwifi: mvm: add debugfs file for fixed reduced tx power Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 07/47] iwlwifi: pcie: implement GRO without NAPI Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 08/47] iwlwifi: pcie: clarify RX queue need_update handling and locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 09/47] iwlwifi: pcie: use bool for TX queue where appropriate Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 10/47] iwlwifi: pcie: fix TX queue locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 11/47] iwlwifi: pcie: clarify TX queue need_update handling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 12/47] iwlwifi: pcie: unify iwl_rx_replenish and iwl_rx_replenish_now Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 13/47] iwlwifi: move CPU1_CPU2_SEPARATOR_SECTION to iwl-fw.h Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 14/47] iwlwifi: mvm: remove redundant empty line Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 15/47] iwlwifi: mvm: propagate the beamforming status from firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 16/47] iwlwifi: mvm: don't set AP STA to EINVAL Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 17/47] iwlwifi: allow to wait for a subset of the queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 18/47] iwlwifi: pcie: WARN upon traffic while flushing TX queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 19/47] iwlwifi: mvm: dump Rx FIFO when the firmware asserts Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 20/47] iwlwifi: mvm: Fix warning message when exit thermal throttling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 21/47] iwlwifi: mvm: Fix tx-backoff when NIC " Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 22/47] iwlwifi: mvm: don't enable bcast filtering on P2P client Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 23/47] iwlwifi: mvm: Use RCU_INIT_POINTER(x, NULL) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 24/47] iwlwifi: mvm: add per rate tx stats Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 25/47] iwlwifi: mvm: replace BUG_ON by WARN_ON in scan.c Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 26/47] iwlwifi: mvm: deprecate -7 firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 27/47] iwlwifi: mvm: Change scan fragmentation condition Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 28/47] iwlwifi: mvm: Fix scan parameters units Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 29/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_NEWBT_COEX TLV flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 30/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 31/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_RX_ENERGY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 32/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 33/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_BF_UPDATED flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 34/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 35/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_SCHED_SCAN flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 36/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 37/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_STA_KEY_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 38/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 39/47] iwlwifi: mvm: BT Coex - don't use comma operator Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 40/47] iwlwifi: mvm: BT Coex - minor API change Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 41/47] iwlwifi: mvm: BT Coex - send priority tables from iwl_send_bt_init_conf Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 42/47] iwlwifi: mvm: Add support for Energy based scan (EBS) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 43/47] iwlwifi: 7000: bump firmware API version to 9 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 44/47] iwlwifi: mvm: don't use d3 fw if d0i3 is used Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 45/47] iwlwifi: mvm: replace leading spaces by tabs Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 46/47] iwlwifi: mvm: Re-factor enabling uAPSD logic Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 47/47] iwlwifi: don't disable SCD chain extension on newer devices Emmanuel Grumbach
2014-04-13 19:25 ` pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-22 20:07 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397416802-32403-3-git-send-email-egrumbach@gmail.com \
--to=egrumbach@gmail.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).