From: Emmanuel Grumbach <egrumbach@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 33/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_BF_UPDATED flag
Date: Sun, 13 Apr 2014 22:19:48 +0300 [thread overview]
Message-ID: <1397416802-32403-33-git-send-email-egrumbach@gmail.com> (raw)
In-Reply-To: <534AE330.2020805@gmail.com>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
All the supported firmwares have this flag set.
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-fw.h | 2 --
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 3 +--
drivers/net/wireless/iwlwifi/mvm/power.c | 3 +--
3 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 04eac6e..f87ab69 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -79,7 +79,6 @@
* offload profile config command.
* @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
* (rather than two) IPv6 addresses
- * @IWL_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API
* @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
* from the probe request template.
* @IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API: modified D3 API to allow keeping
@@ -107,7 +106,6 @@ enum iwl_ucode_tlv_flag {
IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
- IWL_UCODE_TLV_FLAGS_BF_UPDATED = BIT(11),
IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API = BIT(14),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 39e4ffe..c455722 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -824,8 +824,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
goto out_remove_mac;
if (!mvm->bf_allowed_vif &&
- vif->type == NL80211_IFTYPE_STATION && !vif->p2p &&
- mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BF_UPDATED){
+ vif->type == NL80211_IFTYPE_STATION && !vif->p2p) {
mvm->bf_allowed_vif = mvmvif;
vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
IEEE80211_VIF_SUPPORTS_CQM_RSSI;
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index ab92a63..dba760f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -843,8 +843,7 @@ int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm,
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
int ret;
- if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BF_UPDATED) ||
- vif->type != NL80211_IFTYPE_STATION || vif->p2p)
+ if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
return 0;
ret = iwl_mvm_beacon_filter_send_cmd(mvm, &cmd, flags);
--
1.8.3.2
next prev parent reply other threads:[~2014-04-13 19:21 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-13 19:19 pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 01/47] iwlwifi: mvm: Handle power management constraints for additional use-cases Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 02/47] iwlwifi: mvm: fix the number of channels in family 8000 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 03/47] iwlwifi: pcie: don't leave the new NICs awake for commands Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 04/47] iwlwifi: mvm: add lq_cmd/tx_resp reduced_tpc field Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 05/47] iwlwifi: mvm: add ATPC implementation Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 06/47] iwlwifi: mvm: add debugfs file for fixed reduced tx power Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 07/47] iwlwifi: pcie: implement GRO without NAPI Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 08/47] iwlwifi: pcie: clarify RX queue need_update handling and locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 09/47] iwlwifi: pcie: use bool for TX queue where appropriate Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 10/47] iwlwifi: pcie: fix TX queue locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 11/47] iwlwifi: pcie: clarify TX queue need_update handling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 12/47] iwlwifi: pcie: unify iwl_rx_replenish and iwl_rx_replenish_now Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 13/47] iwlwifi: move CPU1_CPU2_SEPARATOR_SECTION to iwl-fw.h Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 14/47] iwlwifi: mvm: remove redundant empty line Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 15/47] iwlwifi: mvm: propagate the beamforming status from firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 16/47] iwlwifi: mvm: don't set AP STA to EINVAL Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 17/47] iwlwifi: allow to wait for a subset of the queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 18/47] iwlwifi: pcie: WARN upon traffic while flushing TX queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 19/47] iwlwifi: mvm: dump Rx FIFO when the firmware asserts Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 20/47] iwlwifi: mvm: Fix warning message when exit thermal throttling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 21/47] iwlwifi: mvm: Fix tx-backoff when NIC " Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 22/47] iwlwifi: mvm: don't enable bcast filtering on P2P client Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 23/47] iwlwifi: mvm: Use RCU_INIT_POINTER(x, NULL) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 24/47] iwlwifi: mvm: add per rate tx stats Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 25/47] iwlwifi: mvm: replace BUG_ON by WARN_ON in scan.c Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 26/47] iwlwifi: mvm: deprecate -7 firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 27/47] iwlwifi: mvm: Change scan fragmentation condition Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 28/47] iwlwifi: mvm: Fix scan parameters units Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 29/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_NEWBT_COEX TLV flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 30/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 31/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_RX_ENERGY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 32/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 flag Emmanuel Grumbach
2014-04-13 19:19 ` Emmanuel Grumbach [this message]
2014-04-13 19:19 ` [PATCH 34/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 35/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_SCHED_SCAN flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 36/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 37/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_STA_KEY_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 38/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 39/47] iwlwifi: mvm: BT Coex - don't use comma operator Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 40/47] iwlwifi: mvm: BT Coex - minor API change Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 41/47] iwlwifi: mvm: BT Coex - send priority tables from iwl_send_bt_init_conf Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 42/47] iwlwifi: mvm: Add support for Energy based scan (EBS) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 43/47] iwlwifi: 7000: bump firmware API version to 9 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 44/47] iwlwifi: mvm: don't use d3 fw if d0i3 is used Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 45/47] iwlwifi: mvm: replace leading spaces by tabs Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 46/47] iwlwifi: mvm: Re-factor enabling uAPSD logic Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 47/47] iwlwifi: don't disable SCD chain extension on newer devices Emmanuel Grumbach
2014-04-13 19:25 ` pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-22 20:07 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397416802-32403-33-git-send-email-egrumbach@gmail.com \
--to=egrumbach@gmail.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).