linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Emmanuel Grumbach <egrumbach@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>,
	Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 09/47] iwlwifi: pcie: use bool for TX queue where appropriate
Date: Sun, 13 Apr 2014 22:19:24 +0300	[thread overview]
Message-ID: <1397416802-32403-9-git-send-email-egrumbach@gmail.com> (raw)
In-Reply-To: <534AE330.2020805@gmail.com>

From: Johannes Berg <johannes.berg@intel.com>

Instead of using u8 to hold logic values, use bool.

Also fix a comment, the return value is no longer relevant.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/internal.h |  2 +-
 drivers/net/wireless/iwlwifi/pcie/tx.c       | 22 ++++++++++------------
 2 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index 477ac36..1261a41 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -231,7 +231,7 @@ struct iwl_txq {
 	spinlock_t lock;
 	struct timer_list stuck_timer;
 	struct iwl_trans_pcie *trans_pcie;
-	u8 need_update;
+	bool need_update;
 	u8 active;
 	bool ampdu;
 };
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 0368609..6c7dca1 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -293,7 +293,7 @@ void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq)
 	u32 reg = 0;
 	int txq_id = txq->q.id;
 
-	if (txq->need_update == 0)
+	if (!txq->need_update)
 		return;
 
 	/*
@@ -328,7 +328,7 @@ void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq)
 	IWL_DEBUG_TX(trans, "Q:%d WR: 0x%x\n", txq_id, txq->q.write_ptr);
 	iwl_write32(trans, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8));
 
-	txq->need_update = 0;
+	txq->need_update = false;
 }
 
 static inline dma_addr_t iwl_pcie_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
@@ -542,7 +542,7 @@ static int iwl_pcie_txq_init(struct iwl_trans *trans, struct iwl_txq *txq,
 {
 	int ret;
 
-	txq->need_update = 0;
+	txq->need_update = false;
 
 	/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
 	 * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
@@ -1393,7 +1393,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
 		kfree(txq->entries[idx].free_buf);
 	txq->entries[idx].free_buf = dup_buf;
 
-	txq->need_update = 1;
+	txq->need_update = true;
 
 	trace_iwlwifi_dev_hcmd(trans->dev, cmd, cmd_size, &out_cmd->hdr);
 
@@ -1664,7 +1664,7 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
 	dma_addr_t tb0_phys, tb1_phys, scratch_phys;
 	void *tb1_addr;
 	u16 len, tb1_len, tb2_len;
-	u8 wait_write_ptr = 0;
+	bool wait_write_ptr = false;
 	__le16 fc = hdr->frame_control;
 	u8 hdr_len = ieee80211_hdrlen(fc);
 	u16 wifi_seq;
@@ -1766,10 +1766,10 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
 				  skb->data + hdr_len, tb2_len);
 
 	if (!ieee80211_has_morefrags(fc)) {
-		txq->need_update = 1;
+		txq->need_update = true;
 	} else {
-		wait_write_ptr = 1;
-		txq->need_update = 0;
+		wait_write_ptr = true;
+		txq->need_update = false;
 	}
 
 	/* start timer if queue currently empty */
@@ -1783,13 +1783,11 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
 
 	/*
 	 * At this point the frame is "transmitted" successfully
-	 * and we will get a TX status notification eventually,
-	 * regardless of the value of ret. "ret" only indicates
-	 * whether or not we should update the write pointer.
+	 * and we will get a TX status notification eventually.
 	 */
 	if (iwl_queue_space(q) < q->high_mark) {
 		if (wait_write_ptr) {
-			txq->need_update = 1;
+			txq->need_update = true;
 			iwl_pcie_txq_inc_wr_ptr(trans, txq);
 		} else {
 			iwl_stop_queue(trans, txq);
-- 
1.8.3.2


  parent reply	other threads:[~2014-04-13 19:20 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-13 19:19 pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 01/47] iwlwifi: mvm: Handle power management constraints for additional use-cases Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 02/47] iwlwifi: mvm: fix the number of channels in family 8000 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 03/47] iwlwifi: pcie: don't leave the new NICs awake for commands Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 04/47] iwlwifi: mvm: add lq_cmd/tx_resp reduced_tpc field Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 05/47] iwlwifi: mvm: add ATPC implementation Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 06/47] iwlwifi: mvm: add debugfs file for fixed reduced tx power Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 07/47] iwlwifi: pcie: implement GRO without NAPI Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 08/47] iwlwifi: pcie: clarify RX queue need_update handling and locking Emmanuel Grumbach
2014-04-13 19:19 ` Emmanuel Grumbach [this message]
2014-04-13 19:19 ` [PATCH 10/47] iwlwifi: pcie: fix TX queue locking Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 11/47] iwlwifi: pcie: clarify TX queue need_update handling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 12/47] iwlwifi: pcie: unify iwl_rx_replenish and iwl_rx_replenish_now Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 13/47] iwlwifi: move CPU1_CPU2_SEPARATOR_SECTION to iwl-fw.h Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 14/47] iwlwifi: mvm: remove redundant empty line Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 15/47] iwlwifi: mvm: propagate the beamforming status from firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 16/47] iwlwifi: mvm: don't set AP STA to EINVAL Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 17/47] iwlwifi: allow to wait for a subset of the queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 18/47] iwlwifi: pcie: WARN upon traffic while flushing TX queues Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 19/47] iwlwifi: mvm: dump Rx FIFO when the firmware asserts Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 20/47] iwlwifi: mvm: Fix warning message when exit thermal throttling Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 21/47] iwlwifi: mvm: Fix tx-backoff when NIC " Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 22/47] iwlwifi: mvm: don't enable bcast filtering on P2P client Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 23/47] iwlwifi: mvm: Use RCU_INIT_POINTER(x, NULL) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 24/47] iwlwifi: mvm: add per rate tx stats Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 25/47] iwlwifi: mvm: replace BUG_ON by WARN_ON in scan.c Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 26/47] iwlwifi: mvm: deprecate -7 firmware Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 27/47] iwlwifi: mvm: Change scan fragmentation condition Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 28/47] iwlwifi: mvm: Fix scan parameters units Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 29/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_NEWBT_COEX TLV flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 30/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 31/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_RX_ENERGY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 32/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 33/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_BF_UPDATED flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 34/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 35/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_SCHED_SCAN flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 36/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 37/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_STA_KEY_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 38/47] iwlwifi: remove IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD flag Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 39/47] iwlwifi: mvm: BT Coex - don't use comma operator Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 40/47] iwlwifi: mvm: BT Coex - minor API change Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 41/47] iwlwifi: mvm: BT Coex - send priority tables from iwl_send_bt_init_conf Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 42/47] iwlwifi: mvm: Add support for Energy based scan (EBS) Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 43/47] iwlwifi: 7000: bump firmware API version to 9 Emmanuel Grumbach
2014-04-13 19:19 ` [PATCH 44/47] iwlwifi: mvm: don't use d3 fw if d0i3 is used Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 45/47] iwlwifi: mvm: replace leading spaces by tabs Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 46/47] iwlwifi: mvm: Re-factor enabling uAPSD logic Emmanuel Grumbach
2014-04-13 19:20 ` [PATCH 47/47] iwlwifi: don't disable SCD chain extension on newer devices Emmanuel Grumbach
2014-04-13 19:25 ` pull request: iwlwifi 2014-04-13 Emmanuel Grumbach
2014-04-22 20:07   ` John W. Linville

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397416802-32403-9-git-send-email-egrumbach@gmail.com \
    --to=egrumbach@gmail.com \
    --cc=emmanuel.grumbach@intel.com \
    --cc=johannes.berg@intel.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).