[PATCH 1/7] mwifiex: change memset to simple assignment for ht_cap.mcs.rx_mask

[Bing Zhao <bzhao@marvell.com>]

From: Maithili Hinge <maithili@marvell.com>

WARNING: single byte memset is suspicious.
         Swapped 2nd/3rd argument?

This code happens to work because rx_mcs is the first variable
in mcs structure. We should use 'mcs.rx_mcs' here anyway.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Maithili Hinge <maithili@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
---
 drivers/net/wireless/mwifiex/uap_cmd.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 9be6544..3264355 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -175,17 +175,19 @@ mwifiex_set_ht_params(struct mwifiex_private *priv,
 		switch (GET_RXSTBC(cap_info)) {
 		case MWIFIEX_RX_STBC1:
 			/* HT_CAP 1X1 mode */
-			memset(&bss_cfg->ht_cap.mcs, 0xff, 1);
+			bss_cfg->ht_cap.mcs.rx_mask[0] = 0xff;
 			break;
 		case MWIFIEX_RX_STBC12:	/* fall through */
 		case MWIFIEX_RX_STBC123:
 			/* HT_CAP 2X2 mode */
-			memset(&bss_cfg->ht_cap.mcs, 0xff, 2);
+			bss_cfg->ht_cap.mcs.rx_mask[0] = 0xff;
+			bss_cfg->ht_cap.mcs.rx_mask[1] = 0xff;
 			break;
 		default:
 			dev_warn(priv->adapter->dev,
 				 "Unsupported RX-STBC, default to 2x2\n");
-			memset(&bss_cfg->ht_cap.mcs, 0xff, 2);
+			bss_cfg->ht_cap.mcs.rx_mask[0] = 0xff;
+			bss_cfg->ht_cap.mcs.rx_mask[1] = 0xff;
 			break;
 		}
 		priv->ap_11n_enabled = 1;
-- 
1.8.2.3