From: Luca Coelho <luca@coelho.fi>
To: johannes@sipsolutions.net
Cc: linux-wireless@vger.kernel.org, michal.kazior@tieto.com,
andrei.otcheretianski@intel.com
Subject: [PATCH 5/8] iwlwifi: mvm: Add AP/GO channel switch support
Date: Fri, 9 May 2014 14:11:48 +0300 [thread overview]
Message-ID: <1399633911-12788-6-git-send-email-luca@coelho.fi> (raw)
In-Reply-To: <1399633911-12788-1-git-send-email-luca@coelho.fi>
From: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Publish WIPHY_FLAG_HAS_CHANNEL_SWITCH if the fw supports
newly introduced IWL_UCODE_TLV_API_CSA_FLOW.
When CSA starts, save the switching vif inside mvm and during the CSA period
configure fw with a new beacon after each beacon transmission in order to
update the csa counters.
Also, handle correctly the CSA unbind-bind flow which is triggered by mac80211
when the actual channel switch happens.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-fw.h | 2 ++
drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 12 ++++++++
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 44 ++++++++++++++++++++++++++++-
drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 ++
drivers/net/wireless/iwlwifi/mvm/ops.c | 2 +-
5 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index d14f193..946c13d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -128,9 +128,11 @@ enum iwl_ucode_tlv_flag {
/**
* enum iwl_ucode_tlv_api - ucode api
* @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field.
+ * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA.
*/
enum iwl_ucode_tlv_api {
IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID = BIT(0),
+ IWL_UCODE_TLV_API_CSA_FLOW = BIT(4),
};
/**
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 9ccec10..25901ad 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -1240,11 +1240,23 @@ int iwl_mvm_rx_beacon_notif(struct iwl_mvm *mvm,
u32 rate __maybe_unused =
le32_to_cpu(beacon->beacon_notify_hdr.initial_rate);
+ lockdep_assert_held(&mvm->mutex);
+
IWL_DEBUG_RX(mvm, "beacon status %#x retries:%d tsf:0x%16llX rate:%d\n",
status & TX_STATUS_MSK,
beacon->beacon_notify_hdr.failure_frame,
le64_to_cpu(beacon->tsf),
rate);
+
+ if (unlikely(mvm->csa_vif && mvm->csa_vif->csa_active)) {
+ if (!ieee80211_csa_is_complete(mvm->csa_vif)) {
+ iwl_mvm_mac_ctxt_beacon_changed(mvm, mvm->csa_vif);
+ } else {
+ ieee80211_csa_finish(mvm->csa_vif);
+ mvm->csa_vif = NULL;
+ }
+ }
+
return 0;
}
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 4dd9ff4..af1d9da 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -322,6 +322,9 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_GO_UAPSD)
hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_CSA_FLOW)
+ hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
+
hw->wiphy->iface_combinations = iwl_mvm_iface_combinations;
hw->wiphy->n_iface_combinations =
ARRAY_SIZE(iwl_mvm_iface_combinations);
@@ -2178,6 +2181,11 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
switch (vif->type) {
case NL80211_IFTYPE_AP:
+ /* Unless it's a CSA flow we have nothing to do here */
+ if (vif->csa_active) {
+ mvmvif->ap_ibss_active = true;
+ break;
+ }
case NL80211_IFTYPE_ADHOC:
/*
* The AP binding flow is handled as part of the start_ap flow
@@ -2214,6 +2222,12 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
goto out_remove_binding;
}
+ /* Handle binding during CSA */
+ if (vif->type == NL80211_IFTYPE_AP) {
+ iwl_mvm_update_quotas(mvm, vif);
+ iwl_mvm_mac_ctxt_changed(mvm, vif);
+ }
+
goto out_unlock;
out_remove_binding:
@@ -2238,13 +2252,20 @@ static void iwl_mvm_unassign_vif_chanctx(struct ieee80211_hw *hw,
iwl_mvm_remove_time_event(mvm, mvmvif, &mvmvif->time_event_data);
switch (vif->type) {
- case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
goto out_unlock;
case NL80211_IFTYPE_MONITOR:
mvmvif->monitor_active = false;
iwl_mvm_update_quotas(mvm, NULL);
break;
+ case NL80211_IFTYPE_AP:
+ /* This part is triggered only during CSA */
+ if (!vif->csa_active || !mvmvif->ap_ibss_active)
+ goto out_unlock;
+
+ mvmvif->ap_ibss_active = false;
+ iwl_mvm_update_quotas(mvm, NULL);
+ /*TODO: bt_coex notification here? */
default:
break;
}
@@ -2340,6 +2361,25 @@ static int iwl_mvm_mac_testmode_cmd(struct ieee80211_hw *hw,
}
#endif
+static void iwl_mvm_channel_switch_beacon(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_chan_def *chandef)
+{
+ struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+
+ mutex_lock(&mvm->mutex);
+ if (WARN(mvm->csa_vif && mvm->csa_vif->csa_active,
+ "Another CSA is already in progress"))
+ goto out_unlock;
+
+ IWL_DEBUG_MAC80211(mvm, "CSA started to freq %d\n",
+ chandef->center_freq1);
+ mvm->csa_vif = vif;
+
+out_unlock:
+ mutex_unlock(&mvm->mutex);
+}
+
const struct ieee80211_ops iwl_mvm_hw_ops = {
.tx = iwl_mvm_mac_tx,
.ampdu_action = iwl_mvm_mac_ampdu_action,
@@ -2382,6 +2422,8 @@ const struct ieee80211_ops iwl_mvm_hw_ops = {
.set_tim = iwl_mvm_set_tim,
+ .channel_switch_beacon = iwl_mvm_channel_switch_beacon,
+
CFG80211_TESTMODE_CMD(iwl_mvm_mac_testmode_cmd)
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index d564233..87f2105 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -631,6 +631,8 @@ struct iwl_mvm {
bool ps_disabled;
/* Indicate if device power management is allowed */
bool pm_disabled;
+
+ struct ieee80211_vif *csa_vif;
};
/* Extract MVM priv from op_mode and _hw */
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 9545d7f..729a857 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -220,7 +220,7 @@ static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = {
RX_HANDLER(BA_NOTIF, iwl_mvm_rx_ba_notif, false),
RX_HANDLER(BT_PROFILE_NOTIFICATION, iwl_mvm_rx_bt_coex_notif, true),
- RX_HANDLER(BEACON_NOTIFICATION, iwl_mvm_rx_beacon_notif, false),
+ RX_HANDLER(BEACON_NOTIFICATION, iwl_mvm_rx_beacon_notif, true),
RX_HANDLER(STATISTICS_NOTIFICATION, iwl_mvm_rx_statistics, true),
RX_HANDLER(ANTENNA_COUPLING_NOTIFICATION,
iwl_mvm_rx_ant_coupling_notif, true),
--
2.0.0.rc0
next prev parent reply other threads:[~2014-05-09 11:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-09 11:11 [PATCH 0/8] mac80211/cfg80211/iwlwifi: a few channel-switch patches Luca Coelho
2014-05-09 11:11 ` [PATCH 1/8] cfg80211: Add API to update CSA counters in mgmt frames Luca Coelho
2014-05-09 11:11 ` [PATCH 2/8] mac80211: Update " Luca Coelho
2014-05-09 11:11 ` [PATCH 3/8] cfg80211: Support multiple CSA counters Luca Coelho
2014-05-09 11:11 ` [PATCH 4/8] mac80211: " Luca Coelho
2014-05-09 11:11 ` Luca Coelho [this message]
2014-05-09 11:11 ` [PATCH 6/8] mac80211: Provide ieee80211_beacon_get_template API Luca Coelho
2014-05-09 11:11 ` [PATCH 7/8] mac80211: Handle the CSA counters correctly Luca Coelho
2014-05-09 11:11 ` [PATCH 8/8] iwlwifi: mvm: Use beacon_get_template instead of beacon_get Luca Coelho
2014-05-15 13:11 ` [PATCH 0/8] mac80211/cfg80211/iwlwifi: a few channel-switch patches Johannes Berg
2014-05-15 13:18 ` Luca Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399633911-12788-6-git-send-email-luca@coelho.fi \
--to=luca@coelho.fi \
--cc=andrei.otcheretianski@intel.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=michal.kazior@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox