* A question about Wireless dongle HW and driver support - best practice
[not found] <2bac19ce5f704178b25628b5e9e08344@DBXPR07MB093.eurprd07.prod.outlook.com>
@ 2014-07-11 11:39 ` Igor Bezukh
0 siblings, 0 replies; only message in thread
From: Igor Bezukh @ 2014-07-11 11:39 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org
Hi All,
We have an embedded system that consists of Atmel AT91SAM9G20 SoC ( singgle core ARMv5).
This SoC also has USB 1.1 ( 11Mbps).
Kernel version is 2.6.32.
The solution should have two wireless dongles - one acting as Acess Point and the other acting as WiFi client.
In other words, we need the system to be a wireless repeater bridge.
We had a lot of issues with the Atheros CARL9170 drivers and with Ralink 2870.
Ralink 2870 doesn't have support for AP mode, at least in it's 5572 driver pack for linux from Meidatek website.
We need the driver to support both Master and Managed modes, and working on a single CPU core, no SMP.
Can you please suggest a good chipset for such a solution from driver perspective and from HW performance perspective?
TIA,
Igor Bezukh
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-07-11 11:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <2bac19ce5f704178b25628b5e9e08344@DBXPR07MB093.eurprd07.prod.outlook.com>
2014-07-11 11:39 ` A question about Wireless dongle HW and driver support - best practice Igor Bezukh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).