From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from s72.web-hosting.com ([198.187.29.22]:56999 "EHLO s72.web-hosting.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932092AbaHVPJv (ORCPT ); Fri, 22 Aug 2014 11:09:51 -0400 From: Sujith Manoharan To: John Linville Cc: linux-wireless@vger.kernel.org, ath9k-devel@qca.qualcomm.com Subject: [PATCH v2 5/8] ath9k: Add a config option for channel context Date: Fri, 22 Aug 2014 20:39:28 +0530 Message-Id: <1408720171-9765-6-git-send-email-sujith@msujith.org> (sfid-20140822_170954_610150_CFA02022) In-Reply-To: <1408720171-9765-1-git-send-email-sujith@msujith.org> References: <1408720171-9765-1-git-send-email-sujith@msujith.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Sujith Manoharan Channel contexts are supported only for P2P right now, so make sure that the 'normal' path remains unaffected by using a config option. This will also reduce the size of the driver. Signed-off-by: Sujith Manoharan --- drivers/net/wireless/ath/ath9k/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 8fcc029..b8f570e 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -130,6 +130,15 @@ config ATH9K_RFKILL seconds. Turn off to save power, but enable it if you have a platform that can toggle the RF-Kill GPIO. +config ATH9K_CHANNEL_CONTEXT + bool "Channel Context support" + depends on ATH9K + default n + ---help--- + This option enables channel context support in ath9k, which is needed + for multi-channel concurrency. Enable this if P2P PowerSave support + is required. + config ATH9K_HTC tristate "Atheros HTC based wireless cards support" depends on USB && MAC80211 -- 2.0.4