From: Paul McQuade <paulmcquad@gmail.com>
To: paulmcquad@gmail.com
Cc: linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
linux-wireless@vger.kernel.org, gregkh@linuxfoundation.org,
Jes.Sorensen@redhat.com, Larry.Finger@lwfinger.net
Subject: [PATCH] staging: rtl8723au: create macro get_max_rate
Date: Mon, 27 Oct 2014 00:05:00 +0000 [thread overview]
Message-ID: <1414368300-9596-1-git-send-email-paulmcquad@gmail.com> (raw)
create marco for max_rate values
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
---
drivers/staging/rtl8723au/core/rtw_ieee80211.c | 58 ++++++++++++--------------
1 file changed, 26 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/rtl8723au/core/rtw_ieee80211.c b/drivers/staging/rtl8723au/core/rtw_ieee80211.c
index 6274cb3..4c0414d 100644
--- a/drivers/staging/rtl8723au/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8723au/core/rtw_ieee80211.c
@@ -13,6 +13,8 @@
*
******************************************************************************/
#define _IEEE80211_C
+#define get_max_rate(r1, r2, r3, r4) \
+ (bw_40MHz ? (short_GI_40 ? r1 : r2) : (short_GI_20 ? r3 : r4))
#include <drv_types.h>
#include <linux/ieee80211.h>
@@ -794,64 +796,56 @@ u16 rtw_mcs_rate23a(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40,
if (rf_type == RF_1T1R) {
if (mcs->rx_mask[0] & BIT(7))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):
- ((short_GI_20)?722:650);
+ max_rate = get_max_rate(1500, 1350, 722, 650);
else if (mcs->rx_mask[0] & BIT(6))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):
- ((short_GI_20)?650:585);
+ max_rate = get_max_rate(1350, 1215, 650, 585);
else if (mcs->rx_mask[0] & BIT(5))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):
- ((short_GI_20)?578:520);
+ max_rate = get_max_rate(1200, 1080, 578, 520);
else if (mcs->rx_mask[0] & BIT(4))
- max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):
- ((short_GI_20)?433:390);
+ max_rate = get_max_rate(900, 810, 433, 390);
else if (mcs->rx_mask[0] & BIT(3))
- max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):
- ((short_GI_20)?289:260);
+ max_rate = get_max_rate(600, 540, 289, 260);
else if (mcs->rx_mask[0] & BIT(2))
- max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):
- ((short_GI_20)?217:195);
+ max_rate = get_max_rate(450, 405, 217, 195);
else if (mcs->rx_mask[0] & BIT(1))
- max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):
- ((short_GI_20)?144:130);
+ max_rate = get_max_rate(300, 270, 144, 130);
else if (mcs->rx_mask[0] & BIT(0))
- max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):
- ((short_GI_20)?72:65);
+ max_rate = get_max_rate(150, 135, 72, 65);
} else {
if (mcs->rx_mask[1]) {
if (mcs->rx_mask[1] & BIT(7))
- max_rate = (bw_40MHz) ? ((short_GI_40)?3000:2700):((short_GI_20)?1444:1300);
+ max_rate = get_max_rate(3000, 2700, 1444, 1300);
else if (mcs->rx_mask[1] & BIT(6))
- max_rate = (bw_40MHz) ? ((short_GI_40)?2700:2430):((short_GI_20)?1300:1170);
+ max_rate = get_max_rate(2700, 2430, 1300, 1170);
else if (mcs->rx_mask[1] & BIT(5))
- max_rate = (bw_40MHz) ? ((short_GI_40)?2400:2160):((short_GI_20)?1156:1040);
+ max_rate = get_max_rate(2400, 2160, 1156, 1040);
else if (mcs->rx_mask[1] & BIT(4))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1800:1620):((short_GI_20)?867:780);
+ max_rate = get_max_rate(1800, 1620, 867, 780);
else if (mcs->rx_mask[1] & BIT(3))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520);
+ max_rate = get_max_rate(1200, 1080, 578, 520);
else if (mcs->rx_mask[1] & BIT(2))
- max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390);
+ max_rate = get_max_rate(900, 810, 433, 390);
else if (mcs->rx_mask[1] & BIT(1))
- max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260);
+ max_rate = get_max_rate(600, 540, 289, 260);
else if (mcs->rx_mask[1] & BIT(0))
- max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130);
+ max_rate = get_max_rate(300, 270, 144, 130);
} else {
if (mcs->rx_mask[0] & BIT(7))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):((short_GI_20)?722:650);
+ max_rate = get_max_rate(1500, 1350, 722, 650);
else if (mcs->rx_mask[0] & BIT(6))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):((short_GI_20)?650:585);
+ max_rate = get_max_rate(1350, 1215, 650, 585);
else if (mcs->rx_mask[0] & BIT(5))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520);
+ max_rate = get_max_rate(1200, 1080, 578, 520);
else if (mcs->rx_mask[0] & BIT(4))
- max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390);
+ max_rate = get_max_rate(900, 810, 433, 390);
else if (mcs->rx_mask[0] & BIT(3))
- max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260);
+ max_rate = get_max_rate(600, 540, 289, 260);
else if (mcs->rx_mask[0] & BIT(2))
- max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):((short_GI_20)?217:195);
+ max_rate = get_max_rate(450, 405, 217, 195);
else if (mcs->rx_mask[0] & BIT(1))
- max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130);
+ max_rate = get_max_rate(300, 270, 144, 130);
else if (mcs->rx_mask[0] & BIT(0))
- max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):((short_GI_20)?72:65);
+ max_rate = get_max_rate(150, 135, 72, 65);
}
}
return max_rate;
--
1.9.1
next reply other threads:[~2014-10-27 0:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-27 0:05 Paul McQuade [this message]
2014-10-27 0:40 ` [PATCH] staging: rtl8723au: create macro get_max_rate Joe Perches
2014-10-27 5:46 ` Jes Sorensen
-- strict thread matches above, loose matches on Subject: below --
2014-10-26 20:00 Paul McQuade
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414368300-9596-1-git-send-email-paulmcquad@gmail.com \
--to=paulmcquad@gmail.com \
--cc=Jes.Sorensen@redhat.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).