[PATCH] mac80211-hwsim: add frequency attribute to netlink pkts

[greearb@candelatech.com]

From: Ben Greear <greearb@candelatech.com>

Add frequency attribute when sending to user-space over
netlink socket.  The frequency is currently ignored when
receiving from user-space.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 7 +++++++
 drivers/net/wireless/mac80211_hwsim.h | 4 +++-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 270f8cd..b40435c 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -906,6 +906,9 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 	if (nla_put_u32(skb, HWSIM_ATTR_FLAGS, hwsim_flags))
 		goto nla_put_failure;
 
+	if (nla_put_u32(skb, HWSIM_ATTR_FREQ, data->channel->center_freq))
+		goto nla_put_failure;
+
 	/* We get the tx control (rate and retries) info*/
 
 	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
@@ -2421,6 +2424,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	int frame_data_len;
 	void *frame_data;
 	struct sk_buff *skb = NULL;
+	u32 freq;
 
 	if (info->snd_portid != wmediumd_portid) {
 		printk(KERN_DEBUG "mac80211-hwsim: port-id mismatch: %d %d\n",
@@ -2468,6 +2472,9 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 
 	/* A frame is received from user space */
 	memset(&rx_status, 0, sizeof(rx_status));
+	/* TODO: Check ATTR_FREQ if it exists, and maybe throw away off-channel
+	 * packets?
+	 */
 	rx_status.freq = data2->channel->center_freq;
 	rx_status.band = data2->channel->band;
 	rx_status.rate_idx = nla_get_u32(info->attrs[HWSIM_ATTR_RX_RATE]);
diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h
index e614a20..85da35a 100644
--- a/drivers/net/wireless/mac80211_hwsim.h
+++ b/drivers/net/wireless/mac80211_hwsim.h
@@ -60,7 +60,7 @@ enum hwsim_tx_control_flags {
  * space, uses:
  *	%HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER,
  *	%HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE,
- *	%HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
+ *	%HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE, %HWSIM_ATTR_FREQ (optional)
  * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to
  * kernel, uses:
  *	%HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS,
@@ -113,6 +113,7 @@ enum {
  *	single channel is supported
  * @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666
  * @HWSIM_ATTR_NO_VIF:  Do not create vif (wlanX) when creating radio.
+ * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received.
  * @__HWSIM_ATTR_MAX: enum limit
  */
 
@@ -137,6 +138,7 @@ enum {
 	HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE,
 	HWSIM_ATTR_RADIO_NAME,
 	HWSIM_ATTR_NO_VIF,
+	HWSIM_ATTR_FREQ,
 	__HWSIM_ATTR_MAX,
 };
 #define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
-- 
1.7.11.7