From: Malcolm Priestley <tvboxspy@gmail.com>
To: gregkh@linuxfoundation.org
Cc: linux-wireless@vger.kernel.org, forest@alittletooquiet.net,
Malcolm Priestley <tvboxspy@gmail.com>
Subject: [PATCH v2 34/34] staging: vt6655: reset tsf on dissociation
Date: Wed, 29 Oct 2014 17:44:09 +0000 [thread overview]
Message-ID: <1414604649-9105-35-git-send-email-tvboxspy@gmail.com> (raw)
In-Reply-To: <1414604649-9105-1-git-send-email-tvboxspy@gmail.com>
Ensuring that tsf counter does not run while idle.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
---
drivers/staging/vt6655/device_main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index 968ea9a..07d2101 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -2980,6 +2980,11 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
CARDvSetFirstNextTBTT(priv->PortOffset,
conf->beacon_int);
+ } else {
+ VNSvOutPortB(priv->PortOffset + MAC_REG_TFTCTL,
+ TFTCTL_TSFCNTRST);
+ VNSvOutPortB(priv->PortOffset + MAC_REG_TFTCTL,
+ TFTCTL_TSFCNTREN);
}
}
}
--
2.1.0
next prev parent reply other threads:[~2014-10-29 17:46 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-29 17:43 [PATCH v2 00/34] staging: vt6655: Conversion to mac80211 Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 01/34] staging: vt6655: mac80211 conversion: add new rx functions Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 02/34] staging: vt6655: mac80211 conversion: add new key functions Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 03/34] staging: vt6655: mac8021 conversion: add new tx functions Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 04/34] staging: vt6655: mac80211 conversion: s_cbFillTxBufHead Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 05/34] staging: vt6655: dead code remove s_vFillFragParameter Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 06/34] staging: vt6655: mac80211 conversion: s_vFillRTSHead convert to using struct ieee80211_hdr Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 07/34] staging: vt6655: mac80211 conversion: s_uFillDataHead add power saving poll Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 08/34] staging: vt6655: mac80211 conversion add main mac80211 functions Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 09/34] staging: vt6655: mac80211 conversion add channel bands Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 10/34] staging: vt6655: mac80211 conversion replace suspend resume functions Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 11/34] staging: vt6655: mac80211 conversion: device_print_info remove netdevice Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 12/34] staging: vt6655: mac80211 conversion: changes to device_intr Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 13/34] staging: vt6655: mac80211 conversion: device_tx_srv tx and add report rates Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 14/34] staging: vt6655: mac80211 conversion: changes to set channel Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 15/34] staging: vt6655: mac80211 conversion: enable power saving Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 16/34] staging: vt6655: mac80211 conversion: changes to CARDbSetPhyParameter Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 17/34] staging: vt6655: mac80211 conversion: card.c use basic_rates Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 18/34] staging: vt6655: CARDbSetPhyParameter replace s_vSetRSPINF with CARDvSetRSPINF Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 19/34] staging: vt6655: mac80211 conversion: device_init_registers remove legacy code Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 20/34] staging: vt6655: mac80211 conversion: device_free_info Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 21/34] staging: vt6655: switch driver over to mac80211 Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 22/34] staging: vt6655: phy type same as bb type Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 23/34] staging: vt6655: mac80211 conversion: device_error remove legacy functions Malcolm Priestley
2014-10-29 17:43 ` [PATCH v2 24/34] staging: vt6655: vt6655_probe remove management pointers Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 25/34] staging: vt6655: mac80211 conversion: PSbIsNextTBTTWakeUp convert to mac80211 Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 26/34] staging: vt6655: MACvSetDefaultKeyEntry replace WLAN_WEP104_KEYLEN Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 27/34] staging: vt6655: baseband.c replace BIT0 with BIT(0) Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 28/34] staging: vt6655: s_vGenerateTxParameter remove unused cbMACHdLen Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 29/34] staging: vt6655: device_init_registers replace spin lock Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 30/34] staging: vt6655: baseband.c timers " Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 31/34] staging: vt6655: fifo & frag control remove big endian values Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 32/34] staging: vt6655: vnt_rx_data: uCurrRSSI should have the value of *rssi Malcolm Priestley
2014-10-29 17:44 ` [PATCH v2 33/34] staging: vt6655: don't update bUpdateBBVGA when off channel Malcolm Priestley
2014-10-29 17:44 ` Malcolm Priestley [this message]
2014-10-29 20:32 ` [PATCH v2 00/34] staging: vt6655: Conversion to mac80211 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414604649-9105-35-git-send-email-tvboxspy@gmail.com \
--to=tvboxspy@gmail.com \
--cc=forest@alittletooquiet.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).