From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, ath9k-devel@qca.qualcomm.com,
Kobi Cohen-Arazi <kobic@qti.qualcomm.com>
Subject: [PATCH 6/6] ath9k: Enable TSF2 for generic HW timers
Date: Tue, 11 Nov 2014 12:37:24 +0530 [thread overview]
Message-ID: <1415689644-29693-7-git-send-email-sujith@msujith.org> (raw)
In-Reply-To: <1415689644-29693-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
The base TSF is used for HW timers 0..7, but chips
in the AR9003 family and above can support more generic
timers. To use them, however, a second HW TSF needs to
be enabled. This patch allows usage of the extra
timers by starting the second TSF properly.
The extra set of HW timers is apparently also present
in AR9287, but we enable it only for the AR9003 family.
Cc: Kobi Cohen-Arazi <kobic@qti.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 23 ++++++++++++++++++++++-
drivers/net/wireless/ath/ath9k/hw.h | 2 ++
drivers/net/wireless/ath/ath9k/reg.h | 3 +++
3 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 04ae1f8..11a1fbd 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1941,6 +1941,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
REGWRITE_BUFFER_FLUSH(ah);
+ ath9k_hw_gen_timer_start_tsf2(ah);
+
ath9k_hw_init_desc(ah);
if (ath9k_hw_btcoex_is_enabled(ah))
@@ -2905,6 +2907,16 @@ u32 ath9k_hw_gettsf32(struct ath_hw *ah)
}
EXPORT_SYMBOL(ath9k_hw_gettsf32);
+void ath9k_hw_gen_timer_start_tsf2(struct ath_hw *ah)
+{
+ struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+
+ if (timer_table->tsf2_enabled) {
+ REG_SET_BIT(ah, AR_DIRECT_CONNECT, AR_DC_AP_STA_EN);
+ REG_SET_BIT(ah, AR_RESET_TSF, AR_RESET_TSF2_ONCE);
+ }
+}
+
struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
void (*trigger)(void *),
void (*overflow)(void *),
@@ -2915,7 +2927,11 @@ struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
struct ath_gen_timer *timer;
if ((timer_index < AR_FIRST_NDP_TIMER) ||
- (timer_index >= ATH_MAX_GEN_TIMER))
+ (timer_index >= ATH_MAX_GEN_TIMER))
+ return NULL;
+
+ if ((timer_index > AR_FIRST_NDP_TIMER) &&
+ !AR_SREV_9300_20_OR_LATER(ah))
return NULL;
timer = kzalloc(sizeof(struct ath_gen_timer), GFP_KERNEL);
@@ -2929,6 +2945,11 @@ struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
timer->overflow = overflow;
timer->arg = arg;
+ if ((timer_index > AR_FIRST_NDP_TIMER) && !timer_table->tsf2_enabled) {
+ timer_table->tsf2_enabled = true;
+ ath9k_hw_gen_timer_start_tsf2(ah);
+ }
+
return timer;
}
EXPORT_SYMBOL(ath_gen_timer_alloc);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 10ab060..a4f0f65 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -525,6 +525,7 @@ struct ath_gen_timer {
struct ath_gen_timer_table {
struct ath_gen_timer *timers[ATH_MAX_GEN_TIMER];
u16 timer_mask;
+ bool tsf2_enabled;
};
struct ath_hw_antcomb_conf {
@@ -1036,6 +1037,7 @@ void ath9k_hw_gen_timer_start(struct ath_hw *ah,
struct ath_gen_timer *timer,
u32 timer_next,
u32 timer_period);
+void ath9k_hw_gen_timer_start_tsf2(struct ath_hw *ah);
void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer);
void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer);
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 1c0b1c1..ced36b4 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1605,6 +1605,7 @@ enum {
#define AR_RESET_TSF 0x8020
#define AR_RESET_TSF_ONCE 0x01000000
+#define AR_RESET_TSF2_ONCE 0x02000000
#define AR_MAX_CFP_DUR 0x8038
#define AR_CFP_VAL 0x0000FFFF
@@ -1966,6 +1967,8 @@ enum {
#define AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET 0x80000000
#define AR_MAC_PCU_GEN_TIMER_TSF_SEL 0x83d8
+#define AR_DIRECT_CONNECT 0x83a0
+#define AR_DC_AP_STA_EN 0x00000001
#define AR_AES_MUTE_MASK0 0x805c
#define AR_AES_MUTE_MASK0_FC 0x0000FFFF
--
2.1.3
prev parent reply other threads:[~2014-11-11 7:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-11 7:07 [PATCH 0/6] ath9k patches Sujith Manoharan
2014-11-11 7:07 ` [PATCH 1/6] ath9k: disable overriding AR9340 SLP32 registers Sujith Manoharan
2014-11-12 11:26 ` Felix Fietkau
2014-11-13 0:05 ` Sujith Manoharan
2014-11-14 6:02 ` Sujith Manoharan
2014-11-11 7:07 ` [PATCH 2/6] ath9k: Update QCA953x initvals Sujith Manoharan
2014-11-11 7:07 ` [PATCH 3/6] ath9k: Use new " Sujith Manoharan
2014-11-11 7:07 ` [PATCH 4/6] ath9k: Fix high tx power in multi-chain mode Sujith Manoharan
2014-11-11 14:23 ` Felix Fietkau
2014-11-11 23:38 ` Sujith Manoharan
2014-11-12 1:54 ` Pan, Miaoqing
2014-11-12 3:34 ` Sujith Manoharan
2014-11-12 8:48 ` Felix Fietkau
2014-11-13 0:00 ` Sujith Manoharan
2014-11-11 7:07 ` [PATCH 5/6] ath9k: Fix LED configuration Sujith Manoharan
2014-11-11 7:07 ` Sujith Manoharan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415689644-29693-7-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=ath9k-devel@qca.qualcomm.com \
--cc=kobic@qti.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).