From: Vladimir Kondratiev <QCA_vkondrat@QCA.qualcomm.com>
To: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Vladimir Kondratiev <QCA_vkondrat@QCA.qualcomm.com>,
linux-wireless@vger.kernel.org, wil6210@qca.qualcomm.com
Subject: [PATCH 2/3] wil6210: re-submit Rx frames to the wireless media if appropriate
Date: Sun, 8 Mar 2015 15:42:02 +0200 [thread overview]
Message-ID: <1425822123-24668-3-git-send-email-qca_vkondrat@qca.qualcomm.com> (raw)
In-Reply-To: <1425822123-24668-1-git-send-email-qca_vkondrat@qca.qualcomm.com>
This is for AP only. If Rx data frame targeted to one of associated clients,
transmit it back to the wireless media and don't deliver to the host.
For the multicast frames, deliver to both host and wireless media.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/txrx.c | 72 ++++++++++++++++++++++++++-------
1 file changed, 58 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 7f2f560..08d3cac 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -492,17 +492,71 @@ static int wil_rx_refill(struct wil6210_priv *wil, int count)
*/
void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
{
- gro_result_t rc;
+ gro_result_t rc = GRO_NORMAL;
struct wil6210_priv *wil = ndev_to_wil(ndev);
+ struct wireless_dev *wdev = wil_to_wdev(wil);
unsigned int len = skb->len;
struct vring_rx_desc *d = wil_skb_rxdesc(skb);
int cid = wil_rxdesc_cid(d);
+ struct ethhdr *eth = (void *)skb->data;
+ /* here looking for DA, not A1, thus Rxdesc's 'mcast' indication
+ * is not suitable, need to look at data
+ */
+ int mcast = is_multicast_ether_addr(eth->h_dest);
struct wil_net_stats *stats = &wil->sta[cid].stats;
+ struct sk_buff *xmit_skb = NULL;
+ static const char * const gro_res_str[] = {
+ [GRO_MERGED] = "GRO_MERGED",
+ [GRO_MERGED_FREE] = "GRO_MERGED_FREE",
+ [GRO_HELD] = "GRO_HELD",
+ [GRO_NORMAL] = "GRO_NORMAL",
+ [GRO_DROP] = "GRO_DROP",
+ };
skb_orphan(skb);
- rc = napi_gro_receive(&wil->napi_rx, skb);
+ if (wdev->iftype == NL80211_IFTYPE_AP) {
+ if (mcast) {
+ /* send multicast frames both to higher layers in
+ * local net stack and back to the wireless medium
+ */
+ xmit_skb = skb_copy(skb, GFP_ATOMIC);
+ } else {
+ int xmit_cid = wil_find_cid(wil, eth->h_dest);
+
+ if (xmit_cid >= 0) {
+ /* The destination station is associated to
+ * this AP (in this VLAN), so send the frame
+ * directly to it and do not pass it to local
+ * net stack.
+ */
+ xmit_skb = skb;
+ skb = NULL;
+ }
+ }
+ }
+ if (xmit_skb) {
+ /* Send to wireless media and increase priority by 256 to
+ * keep the received priority instead of reclassifying
+ * the frame (see cfg80211_classify8021d).
+ */
+ xmit_skb->dev = ndev;
+ xmit_skb->priority += 256;
+ xmit_skb->protocol = htons(ETH_P_802_3);
+ skb_reset_network_header(xmit_skb);
+ skb_reset_mac_header(xmit_skb);
+ wil_dbg_txrx(wil, "Rx -> Tx %d bytes\n", len);
+ dev_queue_xmit(xmit_skb);
+ }
+
+ if (skb) { /* deliver to local stack */
+ skb->protocol = eth_type_trans(skb, ndev);
+ rc = napi_gro_receive(&wil->napi_rx, skb);
+ wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
+ len, gro_res_str[rc]);
+ }
+ /* statistics. rc set to GRO_NORMAL for AP bridging */
if (unlikely(rc == GRO_DROP)) {
ndev->stats.rx_dropped++;
stats->rx_dropped++;
@@ -512,17 +566,8 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
stats->rx_packets++;
ndev->stats.rx_bytes += len;
stats->rx_bytes += len;
- }
- {
- static const char * const gro_res_str[] = {
- [GRO_MERGED] = "GRO_MERGED",
- [GRO_MERGED_FREE] = "GRO_MERGED_FREE",
- [GRO_HELD] = "GRO_HELD",
- [GRO_NORMAL] = "GRO_NORMAL",
- [GRO_DROP] = "GRO_DROP",
- };
- wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
- len, gro_res_str[rc]);
+ if (mcast)
+ ndev->stats.multicast++;
}
}
@@ -553,7 +598,6 @@ void wil_rx_handle(struct wil6210_priv *wil, int *quota)
skb->protocol = htons(ETH_P_802_2);
wil_netif_rx_any(skb, ndev);
} else {
- skb->protocol = eth_type_trans(skb, ndev);
wil_rx_reorder(wil, skb);
}
}
--
2.1.0
next prev parent reply other threads:[~2015-03-08 13:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-08 13:42 [PATCH 0/3] wil6210 patches Vladimir Kondratiev
2015-03-08 13:42 ` [PATCH 1/3] wil6210: NAPI completion refactor Vladimir Kondratiev
2015-03-13 13:18 ` [1/3] " Kalle Valo
2015-03-08 13:42 ` Vladimir Kondratiev [this message]
2015-03-08 13:42 ` [PATCH 3/3] wil6210: support AP isolation Vladimir Kondratiev
-- strict thread matches above, loose matches on Subject: below --
2015-03-15 14:00 [PATCH 0/7] wil6210 patches Vladimir Kondratiev
2015-03-15 14:00 ` [PATCH 2/3] wil6210: re-submit Rx frames to the wireless media if appropriate Vladimir Kondratiev
2015-03-15 14:03 ` Vladimir Kondratiev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425822123-24668-3-git-send-email-qca_vkondrat@qca.qualcomm.com \
--to=qca_vkondrat@qca.qualcomm.com \
--cc=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=wil6210@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox