From: Sujith Manoharan <sujith@msujith.org>
To: linux-wireless@vger.kernel.org
Cc: ath9k-devel@lists.ath9k.org
Subject: [PATCH v2 04/11] ath9k: Handle MCI_STATE_AIC_CAL_SINGLE
Date: Sat, 14 Mar 2015 11:27:50 +0530 [thread overview]
Message-ID: <1426312677-2064-5-git-send-email-sujith@msujith.org> (raw)
In-Reply-To: <1426312677-2064-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
This patch adds routines to handle the MCI
message AIC_CAL_SINGLE, starting the required
HW calibration.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_aic.c | 169 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/ar9003_aic.h | 9 ++
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 +
drivers/net/wireless/ath/ath9k/btcoex.h | 1 +
4 files changed, 183 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index cc1e97b..c2cfac3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -30,6 +30,175 @@ static bool ar9003_hw_is_aic_enabled(struct ath_hw *ah)
return true;
}
+static void ar9003_aic_gain_table(struct ath_hw *ah)
+{
+ u32 aic_atten_word[19], i;
+
+ /* Config LNA gain difference */
+ REG_WRITE(ah, AR_PHY_BT_COEX_4, 0x2c200a00);
+ REG_WRITE(ah, AR_PHY_BT_COEX_5, 0x5c4e4438);
+
+ /* Program gain table */
+ aic_atten_word[0] = (0x1 & 0xf) << 14 | (0x1f & 0x1f) << 9 | (0x0 & 0xf) << 5 |
+ (0x1f & 0x1f); /* -01 dB: 4'd1, 5'd31, 00 dB: 4'd0, 5'd31 */
+ aic_atten_word[1] = (0x3 & 0xf) << 14 | (0x1f & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+ (0x1f & 0x1f); /* -03 dB: 4'd3, 5'd31, -02 dB: 4'd2, 5'd31 */
+ aic_atten_word[2] = (0x5 & 0xf) << 14 | (0x1f & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+ (0x1f & 0x1f); /* -05 dB: 4'd5, 5'd31, -04 dB: 4'd4, 5'd31 */
+ aic_atten_word[3] = (0x1 & 0xf) << 14 | (0x1e & 0x1f) << 9 | (0x0 & 0xf) << 5 |
+ (0x1e & 0x1f); /* -07 dB: 4'd1, 5'd30, -06 dB: 4'd0, 5'd30 */
+ aic_atten_word[4] = (0x3 & 0xf) << 14 | (0x1e & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+ (0x1e & 0x1f); /* -09 dB: 4'd3, 5'd30, -08 dB: 4'd2, 5'd30 */
+ aic_atten_word[5] = (0x5 & 0xf) << 14 | (0x1e & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+ (0x1e & 0x1f); /* -11 dB: 4'd5, 5'd30, -10 dB: 4'd4, 5'd30 */
+ aic_atten_word[6] = (0x1 & 0xf) << 14 | (0xf & 0x1f) << 9 | (0x0 & 0xf) << 5 |
+ (0xf & 0x1f); /* -13 dB: 4'd1, 5'd15, -12 dB: 4'd0, 5'd15 */
+ aic_atten_word[7] = (0x3 & 0xf) << 14 | (0xf & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+ (0xf & 0x1f); /* -15 dB: 4'd3, 5'd15, -14 dB: 4'd2, 5'd15 */
+ aic_atten_word[8] = (0x5 & 0xf) << 14 | (0xf & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+ (0xf & 0x1f); /* -17 dB: 4'd5, 5'd15, -16 dB: 4'd4, 5'd15 */
+ aic_atten_word[9] = (0x1 & 0xf) << 14 | (0x7 & 0x1f) << 9 | (0x0 & 0xf) << 5 |
+ (0x7 & 0x1f); /* -19 dB: 4'd1, 5'd07, -18 dB: 4'd0, 5'd07 */
+ aic_atten_word[10] = (0x3 & 0xf) << 14 | (0x7 & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+ (0x7 & 0x1f); /* -21 dB: 4'd3, 5'd07, -20 dB: 4'd2, 5'd07 */
+ aic_atten_word[11] = (0x5 & 0xf) << 14 | (0x7 & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+ (0x7 & 0x1f); /* -23 dB: 4'd5, 5'd07, -22 dB: 4'd4, 5'd07 */
+ aic_atten_word[12] = (0x7 & 0xf) << 14 | (0x7 & 0x1f) << 9 | (0x6 & 0xf) << 5 |
+ (0x7 & 0x1f); /* -25 dB: 4'd7, 5'd07, -24 dB: 4'd6, 5'd07 */
+ aic_atten_word[13] = (0x3 & 0xf) << 14 | (0x3 & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+ (0x3 & 0x1f); /* -27 dB: 4'd3, 5'd03, -26 dB: 4'd2, 5'd03 */
+ aic_atten_word[14] = (0x5 & 0xf) << 14 | (0x3 & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+ (0x3 & 0x1f); /* -29 dB: 4'd5, 5'd03, -28 dB: 4'd4, 5'd03 */
+ aic_atten_word[15] = (0x1 & 0xf) << 14 | (0x1 & 0x1f) << 9 | (0x0 & 0xf) << 5 |
+ (0x1 & 0x1f); /* -31 dB: 4'd1, 5'd01, -30 dB: 4'd0, 5'd01 */
+ aic_atten_word[16] = (0x3 & 0xf) << 14 | (0x1 & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+ (0x1 & 0x1f); /* -33 dB: 4'd3, 5'd01, -32 dB: 4'd2, 5'd01 */
+ aic_atten_word[17] = (0x5 & 0xf) << 14 | (0x1 & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+ (0x1 & 0x1f); /* -35 dB: 4'd5, 5'd01, -34 dB: 4'd4, 5'd01 */
+ aic_atten_word[18] = (0x7 & 0xf) << 14 | (0x1 & 0x1f) << 9 | (0x6 & 0xf) << 5 |
+ (0x1 & 0x1f); /* -37 dB: 4'd7, 5'd01, -36 dB: 4'd6, 5'd01 */
+
+ /* Write to Gain table with auto increment enabled. */
+ REG_WRITE(ah, (AR_PHY_AIC_SRAM_ADDR_B0 + 0x3000),
+ (ATH_AIC_SRAM_AUTO_INCREMENT |
+ ATH_AIC_SRAM_GAIN_TABLE_OFFSET));
+
+ for (i = 0; i < 19; i++) {
+ REG_WRITE(ah, (AR_PHY_AIC_SRAM_DATA_B0 + 0x3000),
+ aic_atten_word[i]);
+ }
+}
+
+static void ar9003_aic_cal_start(struct ath_hw *ah, u8 min_valid_count)
+{
+ struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
+ int i;
+
+ /* Write to Gain table with auto increment enabled. */
+ REG_WRITE(ah, (AR_PHY_AIC_SRAM_ADDR_B0 + 0x3000),
+ (ATH_AIC_SRAM_AUTO_INCREMENT |
+ ATH_AIC_SRAM_CAL_OFFSET));
+
+ for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
+ REG_WRITE(ah, (AR_PHY_AIC_SRAM_DATA_B0 + 0x3000), 0);
+ aic->aic_sram[i] = 0;
+ }
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_0_B0,
+ (SM(0, AR_PHY_AIC_MON_ENABLE) |
+ SM(127, AR_PHY_AIC_CAL_MAX_HOP_COUNT) |
+ SM(min_valid_count, AR_PHY_AIC_CAL_MIN_VALID_COUNT) |
+ SM(37, AR_PHY_AIC_F_WLAN) |
+ SM(1, AR_PHY_AIC_CAL_CH_VALID_RESET) |
+ SM(0, AR_PHY_AIC_CAL_ENABLE) |
+ SM(0x40, AR_PHY_AIC_BTTX_PWR_THR) |
+ SM(0, AR_PHY_AIC_ENABLE)));
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_0_B1,
+ (SM(0, AR_PHY_AIC_MON_ENABLE) |
+ SM(1, AR_PHY_AIC_CAL_CH_VALID_RESET) |
+ SM(0, AR_PHY_AIC_CAL_ENABLE) |
+ SM(0x40, AR_PHY_AIC_BTTX_PWR_THR) |
+ SM(0, AR_PHY_AIC_ENABLE)));
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_1_B0,
+ (SM(8, AR_PHY_AIC_CAL_BT_REF_DELAY) |
+ SM(0, AR_PHY_AIC_BT_IDLE_CFG) |
+ SM(1, AR_PHY_AIC_STDBY_COND) |
+ SM(37, AR_PHY_AIC_STDBY_ROT_ATT_DB) |
+ SM(5, AR_PHY_AIC_STDBY_COM_ATT_DB) |
+ SM(15, AR_PHY_AIC_RSSI_MAX) |
+ SM(0, AR_PHY_AIC_RSSI_MIN)));
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_1_B1,
+ (SM(15, AR_PHY_AIC_RSSI_MAX) |
+ SM(0, AR_PHY_AIC_RSSI_MIN)));
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_2_B0,
+ (SM(44, AR_PHY_AIC_RADIO_DELAY) |
+ SM(8, AR_PHY_AIC_CAL_STEP_SIZE_CORR) |
+ SM(12, AR_PHY_AIC_CAL_ROT_IDX_CORR) |
+ SM(2, AR_PHY_AIC_CAL_CONV_CHECK_FACTOR) |
+ SM(5, AR_PHY_AIC_ROT_IDX_COUNT_MAX) |
+ SM(0, AR_PHY_AIC_CAL_SYNTH_TOGGLE) |
+ SM(0, AR_PHY_AIC_CAL_SYNTH_AFTER_BTRX) |
+ SM(200, AR_PHY_AIC_CAL_SYNTH_SETTLING)));
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_3_B0,
+ (SM(2, AR_PHY_AIC_MON_MAX_HOP_COUNT) |
+ SM(1, AR_PHY_AIC_MON_MIN_STALE_COUNT) |
+ SM(1, AR_PHY_AIC_MON_PWR_EST_LONG) |
+ SM(2, AR_PHY_AIC_MON_PD_TALLY_SCALING) |
+ SM(10, AR_PHY_AIC_MON_PERF_THR) |
+ SM(2, AR_PHY_AIC_CAL_TARGET_MAG_SETTING) |
+ SM(1, AR_PHY_AIC_CAL_PERF_CHECK_FACTOR) |
+ SM(1, AR_PHY_AIC_CAL_PWR_EST_LONG)));
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_4_B0,
+ (SM(2, AR_PHY_AIC_CAL_ROT_ATT_DB_EST_ISO) |
+ SM(3, AR_PHY_AIC_CAL_COM_ATT_DB_EST_ISO) |
+ SM(0, AR_PHY_AIC_CAL_ISO_EST_INIT_SETTING) |
+ SM(2, AR_PHY_AIC_CAL_COM_ATT_DB_BACKOFF) |
+ SM(1, AR_PHY_AIC_CAL_COM_ATT_DB_FIXED)));
+
+ REG_WRITE(ah, AR_PHY_AIC_CTRL_4_B1,
+ (SM(2, AR_PHY_AIC_CAL_ROT_ATT_DB_EST_ISO) |
+ SM(3, AR_PHY_AIC_CAL_COM_ATT_DB_EST_ISO) |
+ SM(0, AR_PHY_AIC_CAL_ISO_EST_INIT_SETTING) |
+ SM(2, AR_PHY_AIC_CAL_COM_ATT_DB_BACKOFF) |
+ SM(1, AR_PHY_AIC_CAL_COM_ATT_DB_FIXED)));
+
+ ar9003_aic_gain_table(ah);
+
+ /* Need to enable AIC reference signal in BT modem. */
+ REG_WRITE(ah, ATH_AIC_BT_JUPITER_CTRL,
+ (REG_READ(ah, ATH_AIC_BT_JUPITER_CTRL) |
+ ATH_AIC_BT_AIC_ENABLE));
+
+ aic->aic_cal_start_time = REG_READ(ah, AR_TSF_L32);
+
+ /* Start calibration */
+ REG_CLR_BIT(ah, AR_PHY_AIC_CTRL_0_B1, AR_PHY_AIC_CAL_ENABLE);
+ REG_SET_BIT(ah, AR_PHY_AIC_CTRL_0_B1, AR_PHY_AIC_CAL_CH_VALID_RESET);
+ REG_SET_BIT(ah, AR_PHY_AIC_CTRL_0_B1, AR_PHY_AIC_CAL_ENABLE);
+
+ aic->aic_caled_chan = 0;
+ aic->aic_cal_state = AIC_CAL_STATE_STARTED;
+}
+
+u8 ar9003_aic_calibration_single(struct ath_hw *ah)
+{
+ struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
+ u8 cal_ret = 0;
+ int num_chan;
+
+ num_chan = MS(mci_hw->config, ATH_MCI_CONFIG_AIC_CAL_NUM_CHAN);
+
+ ar9003_aic_cal_start(ah, num_chan);
+
+ return cal_ret;
+}
+
void ar9003_hw_attach_aic_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
index b81d5d1..e31c44e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
@@ -31,6 +31,13 @@
#define ATH_AIC_BT_JUPITER_CTRL 0x66820
#define ATH_AIC_BT_AIC_ENABLE 0x02
+enum aic_cal_state {
+ AIC_CAL_STATE_IDLE = 0,
+ AIC_CAL_STATE_STARTED,
+ AIC_CAL_STATE_DONE,
+ AIC_CAL_STATE_ERROR
+};
+
struct ath_aic_sram_info {
bool valid:1;
bool vga_quad_sign:1;
@@ -46,4 +53,6 @@ struct ath_aic_out_info {
struct ath_aic_sram_info sram;
};
+u8 ar9003_aic_calibration_single(struct ath_hw *ah);
+
#endif /* AR9003_AIC_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index bd169fa..20bb5b9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -19,6 +19,7 @@
#include "hw-ops.h"
#include "ar9003_phy.h"
#include "ar9003_mci.h"
+#include "ar9003_aic.h"
static void ar9003_mci_reset_req_wakeup(struct ath_hw *ah)
{
@@ -1362,6 +1363,9 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
mci->need_flush_btinfo = false;
break;
+ case MCI_STATE_AIC_CAL_SINGLE:
+ value = ar9003_aic_calibration_single(ah);
+ break;
default:
break;
}
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index b3ed738..cd2f0a2 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -107,6 +107,7 @@ struct ath9k_hw_aic {
struct ath_btcoex_hw {
enum ath_btcoex_scheme scheme;
struct ath9k_hw_mci mci;
+ struct ath9k_hw_aic aic;
bool enabled;
u8 wlanactive_gpio;
u8 btactive_gpio;
--
2.3.1
next prev parent reply other threads:[~2015-03-14 5:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-14 5:57 [PATCH v2 00/11] ath9k patches Sujith Manoharan
2015-03-14 5:57 ` [PATCH v2 01/11] ath9k: Add initial structures for AIC Sujith Manoharan
2015-03-20 6:29 ` [v2,01/11] " Kalle Valo
2015-03-14 5:57 ` [PATCH v2 02/11] ath9k: Register private AIC ops Sujith Manoharan
2015-03-20 11:06 ` Kalle Valo
2015-03-20 13:46 ` Sujith Manoharan
2015-03-20 13:55 ` Kalle Valo
2015-03-14 5:57 ` [PATCH v2 03/11] ath9k: Add register definitions for AIC Sujith Manoharan
2015-03-14 5:57 ` Sujith Manoharan [this message]
2015-03-14 5:57 ` [PATCH v2 05/11] ath9k: Finish AIC calibration Sujith Manoharan
2015-03-14 5:57 ` [PATCH v2 06/11] ath9k: Process the AIC calibration results Sujith Manoharan
2015-03-14 5:57 ` [PATCH v2 07/11] ath9k: Disable AIC by default Sujith Manoharan
2015-03-14 5:57 ` [PATCH v2 08/11] ath9k: Handle MCI_STATE_AIC_CAL_RESET Sujith Manoharan
2015-03-14 5:57 ` [PATCH v2 09/11] ath9k: Handle MCI_STATE_AIC_START Sujith Manoharan
2015-03-14 5:57 ` [PATCH v2 10/11] ath9k: Handle MCI_STATE_AIC_CAL Sujith Manoharan
2015-03-14 5:57 ` [PATCH v2 11/11] ath9k: Start AIC calibration during MCI reset Sujith Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426312677-2064-5-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=ath9k-devel@lists.ath9k.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).