From: Taehee Yoo <ap420073@gmail.com>
To: Larry.Finger@lwfinger.net, ap420073@gmail.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] rtlwifi: rtl8192cu: Modify REG_BCN_MAX_ERR related code.
Date: Wed, 6 May 2015 00:58:38 +0900 [thread overview]
Message-ID: <1430841518-3932-1-git-send-email-ap420073@gmail.com> (raw)
1. Remove setting REG_BCN_MAX_ERR code in _rtl92cu_set_media_status().
Initialization routine set REG_BCN_MAX_ERR to 0xFF.
also _rtl92cu_set_media_status set REG_BCN_MAX_ERR to same value.
so i remove this code.
2. Remove rtl92c_init_beacon_max_error's parameter.
because parameter "infra_mode" is not used.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
---
drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 3 +--
drivers/net/wireless/rtlwifi/rtl8192cu/mac.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8192cu/mac.h | 2 +-
3 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index d310d55..1898596 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -889,7 +889,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
rtl92c_set_min_space(hw, IS_92C_SERIAL(rtlhal->version));
rtl92c_init_beacon_parameters(hw, rtlhal->version);
rtl92c_init_ampdu_aggregation(hw);
- rtl92c_init_beacon_max_error(hw, true);
+ rtl92c_init_beacon_max_error(hw);
return err;
}
@@ -1323,7 +1323,6 @@ static int _rtl92cu_set_media_status(struct ieee80211_hw *hw,
enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
bt_msr &= 0xfc;
- rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xFF);
if (type == NL80211_IFTYPE_UNSPECIFIED || type ==
NL80211_IFTYPE_STATION) {
_rtl92cu_stop_tx_beacon(hw);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
index adb8107..f3db6bc 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -613,7 +613,7 @@ void rtl92c_init_ampdu_aggregation(struct ieee80211_hw *hw)
rtl_write_word(rtlpriv, 0x4CA, 0x0708);
}
-void rtl92c_init_beacon_max_error(struct ieee80211_hw *hw, bool infra_mode)
+void rtl92c_init_beacon_max_error(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.h b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.h
index bf53652..58548e8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.h
@@ -66,7 +66,7 @@ void rtl92c_init_edca_param(struct ieee80211_hw *hw,
void rtl92c_init_edca(struct ieee80211_hw *hw);
void rtl92c_init_ampdu_aggregation(struct ieee80211_hw *hw);
-void rtl92c_init_beacon_max_error(struct ieee80211_hw *hw, bool infra_mode);
+void rtl92c_init_beacon_max_error(struct ieee80211_hw *hw);
void rtl92c_init_rdg_setting(struct ieee80211_hw *hw);
void rtl92c_init_retry_function(struct ieee80211_hw *hw);
--
2.1.0
next reply other threads:[~2015-05-05 15:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-05 15:58 Taehee Yoo [this message]
2015-05-08 13:01 ` [PATCH] rtlwifi: rtl8192cu: Modify REG_BCN_MAX_ERR related code Kalle Valo
2015-05-09 9:11 ` Taehee Yoo
2015-05-09 12:02 ` Kalle Valo
2015-05-09 18:12 ` Taehee Yoo
2015-05-11 6:39 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430841518-3932-1-git-send-email-ap420073@gmail.com \
--to=ap420073@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).