From: Arend van Spriel <arend@broadcom.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Arend van Spriel <arend@broadcom.com>
Subject: [PATCH V2 2/7] brcmfmac: correct interface combination info
Date: Sun, 16 Aug 2015 08:55:34 +0200 [thread overview]
Message-ID: <1439708139-7527-3-git-send-email-arend@broadcom.com> (raw)
In-Reply-To: <1439708139-7527-1-git-send-email-arend@broadcom.com>
The interface combination provided by brcmfmac did not truly reflect
the combinations supported by driver and/or firmware.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c | 151 +++++++++++++++------
1 file changed, 112 insertions(+), 39 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
index ffe5260..17cf1bc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -5695,63 +5695,132 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
}
};
+/**
+ * brcmf_setup_ifmodes() - determine interface modes and combinations.
+ *
+ * @wiphy: wiphy object.
+ * @ifp: interface object needed for feat module api.
+ *
+ * The interface modes and combinations are determined dynamically here
+ * based on firmware functionality.
+ *
+ * no p2p and no mbss:
+ *
+ * #STA <= 1, #AP <= 1, channels = 1, 2 total
+ *
+ * no p2p and mbss:
+ *
+ * #STA <= 1, #AP <= 1, channels = 1, 2 total
+ * #AP <= 4, matching BI, channels = 1, 4 total
+ *
+ * p2p, no mchan, and mbss:
+ *
+ * #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total
+ * #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
+ * #AP <= 4, matching BI, channels = 1, 4 total
+ *
+ * p2p, mchan, and mbss:
+ *
+ * #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total
+ * #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
+ * #AP <= 4, matching BI, channels = 1, 4 total
+ */
static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
{
struct ieee80211_iface_combination *combo = NULL;
- struct ieee80211_iface_limit *limits = NULL;
- int i = 0, max_iface_cnt;
+ struct ieee80211_iface_limit *c0_limits = NULL;
+ struct ieee80211_iface_limit *p2p_limits = NULL;
+ struct ieee80211_iface_limit *mbss_limits = NULL;
+ bool mbss, p2p;
+ int i, c, n_combos;
+
+ mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
+ p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
- combo = kzalloc(sizeof(*combo), GFP_KERNEL);
+ n_combos = 1 + !!p2p + !!mbss;
+ combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
if (!combo)
goto err;
- limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
- if (!limits)
+ c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
+ if (!c0_limits)
goto err;
+ if (p2p) {
+ p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
+ if (!p2p_limits)
+ goto err;
+ }
+
+ if (mbss) {
+ mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
+ if (!mbss_limits)
+ goto err;
+ }
+
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP);
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
- combo->num_different_channels = 2;
- else
- combo->num_different_channels = 1;
-
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
- limits[i].max = 1;
- limits[i++].types = BIT(NL80211_IFTYPE_STATION);
- limits[i].max = 4;
- limits[i++].types = BIT(NL80211_IFTYPE_AP);
- max_iface_cnt = 5;
- } else {
- limits[i].max = 2;
- limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_AP);
- max_iface_cnt = 2;
- }
-
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
+ c = 0;
+ i = 0;
+ combo[c].num_different_channels = 1;
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ if (p2p) {
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
+ combo[c].num_different_channels = 2;
wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_P2P_DEVICE);
- limits[i].max = 1;
- limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
- BIT(NL80211_IFTYPE_P2P_GO);
- limits[i].max = 1;
- limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
- max_iface_cnt += 2;
- }
- combo->max_interfaces = max_iface_cnt;
- combo->limits = limits;
- combo->n_limits = i;
-
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+ } else {
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ }
+ combo[c].max_interfaces = i;
+ combo[c].n_limits = i;
+ combo[c].limits = c0_limits;
+
+ if (p2p) {
+ c++;
+ i = 0;
+ combo[c].num_different_channels = 1;
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+ combo[c].max_interfaces = i;
+ combo[c].n_limits = i;
+ combo[c].limits = p2p_limits;
+ }
+
+ if (mbss) {
+ c++;
+ combo[c].beacon_int_infra_match = true;
+ combo[c].num_different_channels = 1;
+ mbss_limits[0].max = 4;
+ mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = 4;
+ combo[c].n_limits = 1;
+ combo[c].limits = mbss_limits;
+ }
+ wiphy->n_iface_combinations = n_combos;
wiphy->iface_combinations = combo;
- wiphy->n_iface_combinations = 1;
return 0;
err:
- kfree(limits);
+ kfree(c0_limits);
+ kfree(p2p_limits);
+ kfree(mbss_limits);
kfree(combo);
return -ENOMEM;
}
@@ -6073,11 +6142,15 @@ static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy,
static void brcmf_free_wiphy(struct wiphy *wiphy)
{
+ int i;
+
if (!wiphy)
return;
- if (wiphy->iface_combinations)
- kfree(wiphy->iface_combinations->limits);
+ if (wiphy->iface_combinations) {
+ for (i = 0; i < wiphy->n_iface_combinations; i++)
+ kfree(wiphy->iface_combinations[i].limits);
+ }
kfree(wiphy->iface_combinations);
if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
--
1.9.1
next prev parent reply other threads:[~2015-08-16 6:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-16 6:55 [PATCH V2 0/7] brcmfmac: nvram loading and code rework Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 1/7] brcmfmac: Add support for host platform NVRAM loading Arend van Spriel
2015-08-19 16:38 ` Rafał Miłecki
2015-08-19 20:55 ` Arend van Spriel
2015-08-20 19:50 ` Arend van Spriel
2015-08-24 19:28 ` Kalle Valo
2015-08-16 6:55 ` Arend van Spriel [this message]
2015-08-19 21:49 ` [PATCH V2 2/7] brcmfmac: correct interface combination info Rafał Miłecki
2015-08-19 21:59 ` Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 3/7] brcmfmac: Increase nr of supported flowrings Arend van Spriel
2015-08-19 21:56 ` Rafał Miłecki
2015-08-24 14:15 ` Arend van Spriel
2015-08-24 20:02 ` Rafał Miłecki
2015-08-29 8:13 ` Arend van Spriel
2015-08-29 9:38 ` Rafał Miłecki
2015-08-29 10:48 ` Arend van Spriel
2015-08-20 16:16 ` Rafał Miłecki
2015-08-20 16:39 ` Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 4/7] brcmfmac: add debugfs entry for msgbuf statistics Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 5/7] brcmfmac: make use of cfg80211_check_combinations() Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 6/7] brcmfmac: block the correct flowring when backup queue overflow Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 7/7] brcmfmac: bump highest event number for 4339 firmware Arend van Spriel
2015-08-16 15:10 ` [PATCH V2 0/7] brcmfmac: nvram loading and code rework Rafał Miłecki
2015-08-17 8:01 ` Arend van Spriel
2015-08-17 14:25 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439708139-7527-3-git-send-email-arend@broadcom.com \
--to=arend@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).