From: Arend van Spriel <arend@broadcom.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Franky Lin <frankyl@broadcom.com>,
Arend van Spriel <arend@broadcom.com>
Subject: [PATCH V3 2/6] brcmfmac: add debugfs entry for msgbuf statistics
Date: Thu, 20 Aug 2015 22:06:04 +0200 [thread overview]
Message-ID: <1440101168-2252-3-git-send-email-arend@broadcom.com> (raw)
In-Reply-To: <1440101168-2252-1-git-send-email-arend@broadcom.com>
From: Franky Lin <frankyl@broadcom.com>
Expose ring buffer read/write pointers and other useful statistics
through debugfs.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c | 56 ++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
index 898c380..7b2136c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
@@ -1360,6 +1360,60 @@ void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid)
}
}
+#ifdef DEBUG
+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
+ struct brcmf_pub *drvr = bus_if->drvr;
+ struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd;
+ struct brcmf_commonring *commonring;
+ u16 i;
+ struct brcmf_flowring_ring *ring;
+ struct brcmf_flowring_hash *hash;
+
+ commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT];
+ seq_printf(seq, "h2d_ctl_submit: rp %4u, wp %4u, depth %4u\n",
+ commonring->r_ptr, commonring->w_ptr, commonring->depth);
+ commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_RXPOST_SUBMIT];
+ seq_printf(seq, "h2d_rx_submit: rp %4u, wp %4u, depth %4u\n",
+ commonring->r_ptr, commonring->w_ptr, commonring->depth);
+ commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_CONTROL_COMPLETE];
+ seq_printf(seq, "d2h_ctl_cmplt: rp %4u, wp %4u, depth %4u\n",
+ commonring->r_ptr, commonring->w_ptr, commonring->depth);
+ commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_TX_COMPLETE];
+ seq_printf(seq, "d2h_tx_cmplt: rp %4u, wp %4u, depth %4u\n",
+ commonring->r_ptr, commonring->w_ptr, commonring->depth);
+ commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_RX_COMPLETE];
+ seq_printf(seq, "d2h_rx_cmplt: rp %4u, wp %4u, depth %4u\n",
+ commonring->r_ptr, commonring->w_ptr, commonring->depth);
+
+ seq_printf(seq, "\nh2d_flowrings: depth %u\n",
+ BRCMF_H2D_TXFLOWRING_MAX_ITEM);
+ seq_puts(seq, "Active flowrings:\n");
+ hash = msgbuf->flow->hash;
+ for (i = 0; i < msgbuf->flow->nrofrings; i++) {
+ if (!msgbuf->flow->rings[i])
+ continue;
+ ring = msgbuf->flow->rings[i];
+ if (ring->status != RING_OPEN)
+ continue;
+ commonring = msgbuf->flowrings[i];
+ hash = &msgbuf->flow->hash[ring->hash_id];
+ seq_printf(seq, "id %3u: rp %4u, wp %4u, qlen %4u, blocked %u\n"
+ " ifidx %u, fifo %u, da %pM\n",
+ i, commonring->r_ptr, commonring->w_ptr,
+ skb_queue_len(&ring->skblist), ring->blocked,
+ hash->ifidx, hash->fifo, hash->mac);
+ }
+
+ return 0;
+}
+#else
+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data)
+{
+ return 0;
+}
+#endif
int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
{
@@ -1460,6 +1514,8 @@ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
spin_lock_init(&msgbuf->flowring_work_lock);
INIT_LIST_HEAD(&msgbuf->work_queue);
+ brcmf_debugfs_add_entry(drvr, "msgbuf_stats", brcmf_msgbuf_stats_read);
+
return 0;
fail:
--
1.9.1
next prev parent reply other threads:[~2015-08-20 20:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-20 20:06 [PATCH V3 0/6] brcmfmac: nvram loading and code rework Arend van Spriel
2015-08-20 20:06 ` [PATCH V3 1/6] brcmfmac: correct interface combination info Arend van Spriel
2015-08-25 12:33 ` [V3,1/6] " Kalle Valo
2015-08-20 20:06 ` Arend van Spriel [this message]
2015-08-20 20:06 ` [PATCH V3 3/6] brcmfmac: make use of cfg80211_check_combinations() Arend van Spriel
2015-08-20 20:06 ` [PATCH V3 4/6] brcmfmac: block the correct flowring when backup queue overflow Arend van Spriel
2015-08-20 20:06 ` [PATCH V3 5/6] brcmfmac: bump highest event number for 4339 firmware Arend van Spriel
2015-08-20 20:06 ` [PATCH V3 6/6] brcmfmac: Add support for host platform NVRAM loading Arend van Spriel
2015-08-20 21:20 ` [PATCH V3 0/6] brcmfmac: nvram loading and code rework Rafał Miłecki
2015-08-20 21:23 ` Arend van Spriel
2015-08-20 21:26 ` Rafał Miłecki
2015-08-25 12:36 ` Kalle Valo
2015-08-25 16:09 ` Rafał Miłecki
2015-08-25 16:42 ` Arend van Spriel
2015-08-25 16:53 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440101168-2252-3-git-send-email-arend@broadcom.com \
--to=arend@broadcom.com \
--cc=frankyl@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox