From: "Rafał Miłecki" <zajec5@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>, linux-wireless@vger.kernel.org
Cc: "Hauke Mehrtens" <hauke@hauke-m.de>, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH] bcma: init serial console directly from ChipCommon code
Date: Fri, 22 Jan 2016 18:02:54 +0100 [thread overview]
Message-ID: <1453482174-11021-1-git-send-email-zajec5@gmail.com> (raw)
UART is connected to and controlled over ChipCommon core. It doesn't
have much to do with MIPS core (where we initialize it currently)
except just existing on embedded systemms. There isn't point of such
cross-core initialization (and we needed #ifdef anyway) so just handle
it in ChipCommon.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/bcma/bcma_private.h | 1 -
drivers/bcma/driver_chipcommon.c | 13 ++++++++++---
drivers/bcma/driver_mips.c | 3 ---
3 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index 38f1567..7e4ddfb 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -48,7 +48,6 @@ void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
#ifdef CONFIG_BCMA_DRIVER_MIPS
-void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
extern struct platform_device bcma_pflash_dev;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index 36ee221..bdb73d9 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -15,6 +15,8 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
u32 mask, u32 value)
{
@@ -115,6 +117,8 @@ int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
{
+ struct bcma_bus *bus = cc->core->bus;
+
if (cc->early_setup_done)
return;
@@ -129,6 +133,9 @@ void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_early_init(cc);
+ if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC)
+ bcma_chipco_serial_init(cc);
+
cc->early_setup_done = true;
}
@@ -314,9 +321,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
return res;
}
-#ifdef CONFIG_BCMA_DRIVER_MIPS
-void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
{
+#if IS_BUILTIN(CONFIG_BCM47XX)
unsigned int irq;
u32 baud_base;
u32 i;
@@ -358,5 +365,5 @@ void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
ports[i].baud_base = baud_base;
ports[i].reg_shift = 0;
}
+#endif /* CONFIG_BCM47XX */
}
-#endif /* CONFIG_BCMA_DRIVER_MIPS */
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
index 24424f3..a40a203 100644
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -337,12 +337,9 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
{
- struct bcma_bus *bus = mcore->core->bus;
-
if (mcore->early_setup_done)
return;
- bcma_chipco_serial_init(&bus->drv_cc);
bcma_core_mips_flash_detect(mcore);
mcore->early_setup_done = true;
--
1.8.4.5
next reply other threads:[~2016-01-22 17:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-22 17:02 Rafał Miłecki [this message]
2016-01-22 21:07 ` [PATCH] bcma: init serial console directly from ChipCommon code Hauke Mehrtens
2016-02-06 11:46 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453482174-11021-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=hauke@hauke-m.de \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).