* [PATCH] carl9170: import 1.9.9 firmware headers
@ 2016-02-15 20:16 Christian Lamparter
2016-03-07 12:11 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Christian Lamparter @ 2016-02-15 20:16 UTC (permalink / raw)
To: linux-wireless; +Cc: Christian Lamparter, kvalo
Import new headers from my firmware branch:
<https://github.com/chunkeey/carl9170fw>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---
drivers/net/wireless/ath/carl9170/fwcmd.h | 8 ++++
drivers/net/wireless/ath/carl9170/fwdesc.h | 6 +++
drivers/net/wireless/ath/carl9170/hw.h | 73 +++++++++++++++++++++++++++--
drivers/net/wireless/ath/carl9170/version.h | 6 +--
4 files changed, 87 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/carl9170/fwcmd.h b/drivers/net/wireless/ath/carl9170/fwcmd.h
index 9111d4f..ea1d80f 100644
--- a/drivers/net/wireless/ath/carl9170/fwcmd.h
+++ b/drivers/net/wireless/ath/carl9170/fwcmd.h
@@ -56,6 +56,7 @@ enum carl9170_cmd_oids {
CARL9170_CMD_RX_FILTER = 0x07,
CARL9170_CMD_WOL = 0x08,
CARL9170_CMD_TALLY = 0x09,
+ CARL9170_CMD_WREGB = 0x0a,
/* CAM */
CARL9170_CMD_EKEY = 0x10,
@@ -123,6 +124,12 @@ struct carl9170_write_reg {
} regs[0] __packed;
} __packed;
+struct carl9170_write_reg_byte {
+ __le32 addr;
+ __le32 count;
+ u8 val[0];
+} __packed;
+
#define CARL9170FW_PHY_HT_ENABLE 0x4
#define CARL9170FW_PHY_HT_DYN2040 0x8
#define CARL9170FW_PHY_HT_EXT_CHAN_OFF 0x3
@@ -226,6 +233,7 @@ struct carl9170_cmd {
struct carl9170_u32_list echo;
struct carl9170_reg_list rreg;
struct carl9170_write_reg wreg;
+ struct carl9170_write_reg_byte wregb;
struct carl9170_rf_init rf_init;
struct carl9170_psm psm;
struct carl9170_wol_cmd wol;
diff --git a/drivers/net/wireless/ath/carl9170/fwdesc.h b/drivers/net/wireless/ath/carl9170/fwdesc.h
index 66848d4..0533f79c 100644
--- a/drivers/net/wireless/ath/carl9170/fwdesc.h
+++ b/drivers/net/wireless/ath/carl9170/fwdesc.h
@@ -81,6 +81,12 @@ enum carl9170fw_feature_list {
/* Firmware will pass BA when BARs are queued */
CARL9170FW_RX_BA_FILTER,
+ /* Firmware has support to write a byte at a time */
+ CARL9170FW_HAS_WREGB_CMD,
+
+ /* Pattern generator */
+ CARL9170FW_PATTERN_GENERATOR,
+
/* KEEP LAST */
__CARL9170FW_FEATURE_NUM
};
diff --git a/drivers/net/wireless/ath/carl9170/hw.h b/drivers/net/wireless/ath/carl9170/hw.h
index 0db874a..08e0ae9 100644
--- a/drivers/net/wireless/ath/carl9170/hw.h
+++ b/drivers/net/wireless/ath/carl9170/hw.h
@@ -453,9 +453,74 @@
#define AR9170_MC_REG_BASE 0x1d1000
#define AR9170_MC_REG_FLASH_WAIT_STATE (AR9170_MC_REG_BASE + 0x000)
-#define AR9170_MC_REG_SEEPROM_WP0 (AR9170_MC_REG_BASE + 0x400)
-#define AR9170_MC_REG_SEEPROM_WP1 (AR9170_MC_REG_BASE + 0x404)
-#define AR9170_MC_REG_SEEPROM_WP2 (AR9170_MC_REG_BASE + 0x408)
+
+#define AR9170_SPI_REG_BASE (AR9170_MC_REG_BASE + 0x200)
+#define AR9170_SPI_REG_CONTROL0 (AR9170_SPI_REG_BASE + 0x000)
+#define AR9170_SPI_CONTROL0_BUSY BIT(0)
+#define AR9170_SPI_CONTROL0_CMD_GO BIT(1)
+#define AR9170_SPI_CONTROL0_PAGE_WR BIT(2)
+#define AR9170_SPI_CONTROL0_SEQ_RD BIT(3)
+#define AR9170_SPI_CONTROL0_CMD_ABORT BIT(4)
+#define AR9170_SPI_CONTROL0_CMD_LEN_S 8
+#define AR9170_SPI_CONTROL0_CMD_LEN 0x00000f00
+#define AR9170_SPI_CONTROL0_RD_LEN_S 12
+#define AR9170_SPI_CONTROL0_RD_LEN 0x00007000
+
+#define AR9170_SPI_REG_CONTROL1 (AR9170_SPI_REG_BASE + 0x004)
+#define AR9170_SPI_CONTROL1_SCK_RATE BIT(0)
+#define AR9170_SPI_CONTROL1_DRIVE_SDO BIT(1)
+#define AR9170_SPI_CONTROL1_MODE_SEL_S 2
+#define AR9170_SPI_CONTROL1_MODE_SEL 0x000000c0
+#define AR9170_SPI_CONTROL1_WRITE_PROTECT BIT(4)
+
+#define AR9170_SPI_REG_COMMAND_PORT0 (AR9170_SPI_REG_BASE + 0x008)
+#define AR9170_SPI_COMMAND_PORT0_CMD0_S 0
+#define AR9170_SPI_COMMAND_PORT0_CMD0 0x000000ff
+#define AR9170_SPI_COMMAND_PORT0_CMD1_S 8
+#define AR9170_SPI_COMMAND_PORT0_CMD1 0x0000ff00
+#define AR9170_SPI_COMMAND_PORT0_CMD2_S 16
+#define AR9170_SPI_COMMAND_PORT0_CMD2 0x00ff0000
+#define AR9170_SPI_COMMAND_PORT0_CMD3_S 24
+#define AR9170_SPI_COMMAND_PORT0_CMD3 0xff000000
+
+#define AR9170_SPI_REG_COMMAND_PORT1 (AR9170_SPI_REG_BASE + 0x00C)
+#define AR9170_SPI_COMMAND_PORT1_CMD4_S 0
+#define AR9170_SPI_COMMAND_PORT1_CMD4 0x000000ff
+#define AR9170_SPI_COMMAND_PORT1_CMD5_S 8
+#define AR9170_SPI_COMMAND_PORT1_CMD5 0x0000ff00
+#define AR9170_SPI_COMMAND_PORT1_CMD6_S 16
+#define AR9170_SPI_COMMAND_PORT1_CMD6 0x00ff0000
+#define AR9170_SPI_COMMAND_PORT1_CMD7_S 24
+#define AR9170_SPI_COMMAND_PORT1_CMD7 0xff000000
+
+#define AR9170_SPI_REG_DATA_PORT (AR9170_SPI_REG_BASE + 0x010)
+#define AR9170_SPI_REG_PAGE_WRITE_LEN (AR9170_SPI_REG_BASE + 0x014)
+
+#define AR9170_EEPROM_REG_BASE (AR9170_MC_REG_BASE + 0x400)
+#define AR9170_EEPROM_REG_WP_MAGIC1 (AR9170_EEPROM_REG_BASE + 0x000)
+#define AR9170_EEPROM_WP_MAGIC1 0x12345678
+
+#define AR9170_EEPROM_REG_WP_MAGIC2 (AR9170_EEPROM_REG_BASE + 0x004)
+#define AR9170_EEPROM_WP_MAGIC2 0x55aa00ff
+
+#define AR9170_EEPROM_REG_WP_MAGIC3 (AR9170_EEPROM_REG_BASE + 0x008)
+#define AR9170_EEPROM_WP_MAGIC3 0x13579ace
+
+#define AR9170_EEPROM_REG_CLOCK_DIV (AR9170_EEPROM_REG_BASE + 0x00C)
+#define AR9170_EEPROM_CLOCK_DIV_FAC_S 0
+#define AR9170_EEPROM_CLOCK_DIV_FAC 0x000001ff
+#define AR9170_EEPROM_CLOCK_DIV_FAC_39KHZ 0xff
+#define AR9170_EEPROM_CLOCK_DIV_FAC_78KHZ 0x7f
+#define AR9170_EEPROM_CLOCK_DIV_FAC_312KHZ 0x1f
+#define AR9170_EEPROM_CLOCK_DIV_FAC_10MHZ 0x0
+#define AR9170_EEPROM_CLOCK_DIV_SOFT_RST BIT(9)
+
+#define AR9170_EEPROM_REG_MODE (AR9170_EEPROM_REG_BASE + 0x010)
+#define AR9170_EEPROM_MODE_EEPROM_SIZE_16K_PLUS BIT(31)
+
+#define AR9170_EEPROM_REG_WRITE_PROTECT (AR9170_EEPROM_REG_BASE + 0x014)
+#define AR9170_EEPROM_WRITE_PROTECT_WP_STATUS BIT(0)
+#define AR9170_EEPROM_WRITE_PROTECT_WP_SET BIT(8)
/* Interrupt Controller */
#define AR9170_MAX_INT_SRC 9
@@ -589,11 +654,13 @@
#define AR9170_USB_REG_EP10_MAP (AR9170_USB_REG_BASE + 0x039)
#define AR9170_USB_REG_EP_IN_MAX_SIZE_HIGH (AR9170_USB_REG_BASE + 0x03f)
+#define AR9170_USB_EP_IN_STALL 0x8
#define AR9170_USB_EP_IN_TOGGLE 0x10
#define AR9170_USB_REG_EP_IN_MAX_SIZE_LOW (AR9170_USB_REG_BASE + 0x03e)
#define AR9170_USB_REG_EP_OUT_MAX_SIZE_HIGH (AR9170_USB_REG_BASE + 0x05f)
+#define AR9170_USB_EP_OUT_STALL 0x8
#define AR9170_USB_EP_OUT_TOGGLE 0x10
#define AR9170_USB_REG_EP_OUT_MAX_SIZE_LOW (AR9170_USB_REG_BASE + 0x05e)
diff --git a/drivers/net/wireless/ath/carl9170/version.h b/drivers/net/wireless/ath/carl9170/version.h
index 2282847..a0410fe 100644
--- a/drivers/net/wireless/ath/carl9170/version.h
+++ b/drivers/net/wireless/ath/carl9170/version.h
@@ -1,7 +1,7 @@
#ifndef __CARL9170_SHARED_VERSION_H
#define __CARL9170_SHARED_VERSION_H
-#define CARL9170FW_VERSION_YEAR 12
-#define CARL9170FW_VERSION_MONTH 12
+#define CARL9170FW_VERSION_YEAR 16
+#define CARL9170FW_VERSION_MONTH 2
#define CARL9170FW_VERSION_DAY 15
-#define CARL9170FW_VERSION_GIT "1.9.7"
+#define CARL9170FW_VERSION_GIT "1.9.9"
#endif /* __CARL9170_SHARED_VERSION_H */
--
2.7.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: carl9170: import 1.9.9 firmware headers
2016-02-15 20:16 [PATCH] carl9170: import 1.9.9 firmware headers Christian Lamparter
@ 2016-03-07 12:11 ` Kalle Valo
0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2016-03-07 12:11 UTC (permalink / raw)
To: Christian Lamparter; +Cc: linux-wireless, Christian Lamparter, kvalo
> Import new headers from my firmware branch:
> <https://github.com/chunkeey/carl9170fw>
>
> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Thanks, applied to wireless-drivers-next.git.
Kalle Valo
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-03-07 12:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-15 20:16 [PATCH] carl9170: import 1.9.9 firmware headers Christian Lamparter
2016-03-07 12:11 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).