* [PATCH 00/13] disable hw peak cal for all ar9300 chips
@ 2016-02-26 8:08 miaoqing
2016-02-26 8:08 ` [PATCH 01/13] ath9k: Update QCA953x initvals miaoqing
` (13 more replies)
0 siblings, 14 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Miaoqing Pan (13):
ath9k: Update QCA953x initvals
ath9k: Update AR9003 2.2 initvals
ath9k: Update AR933x initvals
ath9k: Update AR9340 initvals
ath9k: Update AR9462 initvals
ath9k: Update AR9485 initvals
ath9k: Update AR955x initvals
ath9k: Update AR9565 initvals
ath9k: Update QCA956x initvals
ath9k: Update AR9580 initvals
ath9k: enable manual peak cal for all ar9300 chips
ath9k: use AR_SREV_9003_PCOEM to identify PCOEM chips
ath9k: set correct peak detect threshold
.../net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 4 +-
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 44 +++++++++-------------
.../net/wireless/ath/ath9k/ar9330_1p1_initvals.h | 4 +-
.../net/wireless/ath/ath9k/ar9330_1p2_initvals.h | 4 +-
drivers/net/wireless/ath/ath9k/ar9340_initvals.h | 4 +-
.../net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 4 +-
.../net/wireless/ath/ath9k/ar9462_2p1_initvals.h | 4 +-
drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 4 +-
drivers/net/wireless/ath/ath9k/ar953x_initvals.h | 4 +-
.../net/wireless/ath/ath9k/ar955x_1p0_initvals.h | 2 +-
.../net/wireless/ath/ath9k/ar9565_1p0_initvals.h | 2 +-
drivers/net/wireless/ath/ath9k/ar956x_initvals.h | 2 +-
.../net/wireless/ath/ath9k/ar9580_1p0_initvals.h | 4 +-
13 files changed, 39 insertions(+), 47 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 01/13] ath9k: Update QCA953x initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 02/13] ath9k: Update AR9003 2.2 initvals miaoqing
` (12 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
commit 14c5932805eb ("ath9k: Update QCA953x initvals")
disabled HW peak detect calibartion on QCA953x 1.0, which
should also be applied on 2.0.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar953x_initvals.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
index 6fc0d07..eb42fb2 100644
--- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
@@ -923,7 +923,7 @@ static const u32 qca953x_2p0_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcf946220, 0xcf946220},
{0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -943,7 +943,7 @@ static const u32 qca953x_2p0_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000010, 0x00000010},
{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
{0x0000a2cc, 0x18c50033, 0x18c43433, 0x18c41033, 0x18c44c33},
{0x0000a2d0, 0x00041982, 0x00041982, 0x00041982, 0x00041982},
{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 02/13] ath9k: Update AR9003 2.2 initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
2016-02-26 8:08 ` [PATCH 01/13] ath9k: Update QCA953x initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 03/13] ath9k: Update AR933x initvals miaoqing
` (11 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index c38399b..c07866a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -331,7 +331,7 @@ static const u32 ar9300_2p2_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
{0x00009e44, 0x02321e27, 0x02321e27, 0x02291e27, 0x02291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -351,7 +351,7 @@ static const u32 ar9300_2p2_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00041983, 0x00041983, 0x00041981, 0x00041982},
{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 03/13] ath9k: Update AR933x initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
2016-02-26 8:08 ` [PATCH 01/13] ath9k: Update QCA953x initvals miaoqing
2016-02-26 8:08 ` [PATCH 02/13] ath9k: Update AR9003 2.2 initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 04/13] ath9k: Update AR9340 initvals miaoqing
` (10 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h | 4 ++--
drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
index 2c42ff0..29479af 100644
--- a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
@@ -40,7 +40,7 @@ static const u32 ar9331_1p1_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00003221, 0x00003221},
- {0x00009e3c, 0xcf946222, 0xcf946222, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
{0x00009e44, 0x02321e27, 0x02321e27, 0x02282324, 0x02282324},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -59,7 +59,7 @@ static const u32 ar9331_1p1_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00071982, 0x00071982, 0x00071982, 0x00071982},
{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
diff --git a/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
index 2154efc..c4a6ffa 100644
--- a/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
@@ -345,7 +345,7 @@ static const u32 ar9331_1p2_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00003221, 0x00003221},
- {0x00009e3c, 0xcf946222, 0xcf946222, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
{0x00009e44, 0x02321e27, 0x02321e27, 0x02282324, 0x02282324},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -364,7 +364,7 @@ static const u32 ar9331_1p2_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00071981, 0x00071981, 0x00071981, 0x00071981},
{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 04/13] ath9k: Update AR9340 initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (2 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 03/13] ath9k: Update AR933x initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 05/13] ath9k: Update AR9462 initvals miaoqing
` (9 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9340_initvals.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
index b995ffe..2eb163f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
@@ -245,7 +245,7 @@ static const u32 ar9340_1p0_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
{0x00009e44, 0x02321e27, 0x02321e27, 0x02291e27, 0x02291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -265,7 +265,7 @@ static const u32 ar9340_1p0_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
{0x0000a288, 0x00000220, 0x00000220, 0x00000110, 0x00000110},
{0x0000a28c, 0x00011111, 0x00011111, 0x00022222, 0x00022222},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00041983, 0x00041983, 0x00041982, 0x00041982},
{0x0000a2d8, 0x7999a83a, 0x7999a83a, 0x7999a83a, 0x7999a83a},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 05/13] ath9k: Update AR9462 initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (3 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 04/13] ath9k: Update AR9340 initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 06/13] ath9k: Update AR9485 initvals miaoqing
` (8 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 4 ++--
drivers/net/wireless/ath/ath9k/ar9462_2p1_initvals.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index 1b6b4d0..b00dd64 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -59,7 +59,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003a5, 0x000003a5, 0x000003a5, 0x000003a5},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c282},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c780, 0xcfd5c280},
{0x00009e44, 0x62321e27, 0x62321e27, 0xfe291e27, 0xfe291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -79,7 +79,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00041981, 0x00041981, 0x00041981, 0x00041982},
{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p1_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p1_initvals.h
index dc3adda..0f8745e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p1_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p1_initvals.h
@@ -239,7 +239,7 @@ static const u32 ar9462_2p1_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003a5, 0x000003a5, 0x000003a5, 0x000003a5},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c282},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c780, 0xcfd5c280},
{0x00009e44, 0x62321e27, 0x62321e27, 0xfe291e27, 0xfe291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -259,7 +259,7 @@ static const u32 ar9462_2p1_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00041981, 0x00041981, 0x00041981, 0x00041982},
{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 06/13] ath9k: Update AR9485 initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (4 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 05/13] ath9k: Update AR9462 initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 07/13] ath9k: Update AR955x initvals miaoqing
` (7 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index ce83ce4..bdf6f10 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -1026,7 +1026,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec80d2e, 0x7ec80d2e},
{0x00009e14, 0x31395d53, 0x31396053, 0x312e6053, 0x312e5d53},
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
{0x0000a204, 0x01303fc0, 0x01303fc4, 0x01303fc4, 0x01303fc0},
@@ -1044,7 +1044,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 07/13] ath9k: Update AR955x initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (5 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 06/13] ath9k: Update AR9485 initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 08/13] ath9k: Update AR9565 initvals miaoqing
` (6 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
index 148562a..67edf34 100644
--- a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
@@ -83,7 +83,7 @@ static const u32 ar955x_1p0_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000010, 0x00000010},
{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2cc, 0x18c50033, 0x18c43433, 0x18c41033, 0x18c44c33},
{0x0000a2d0, 0x00041982, 0x00041982, 0x00041982, 0x00041982},
{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 08/13] ath9k: Update AR9565 initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (6 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 07/13] ath9k: Update AR955x initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 09/13] ath9k: Update QCA956x initvals miaoqing
` (5 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h
index 10d4a6c..35c1bbb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h
@@ -347,7 +347,7 @@ static const u32 ar9565_1p0_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003a4, 0x000003a4},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946222, 0xcf946222, 0xcf946220, 0xcf946220},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
{0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 09/13] ath9k: Update QCA956x initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (7 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 08/13] ath9k: Update AR9565 initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 10/13] ath9k: Update AR9580 initvals miaoqing
` (4 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar956x_initvals.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar956x_initvals.h b/drivers/net/wireless/ath/ath9k/ar956x_initvals.h
index c3a47ea..db05107 100644
--- a/drivers/net/wireless/ath/ath9k/ar956x_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar956x_initvals.h
@@ -220,7 +220,7 @@ static const u32 qca956x_1p0_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003a6, 0x000003a6},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcf946220, 0xcf946220},
{0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 10/13] ath9k: Update AR9580 initvals
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (8 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 09/13] ath9k: Update QCA956x initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 11/13] ath9k: enable manual peak cal for all ar9300 chips miaoqing
` (3 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
index 5d4629f..f4c9bef 100644
--- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
@@ -1290,7 +1290,7 @@ static const u32 ar9580_1p0_baseband_postamble[][5] = {
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
{0x00009e44, 0x02321e27, 0x02321e27, 0x02291e27, 0x02291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -1310,7 +1310,7 @@ static const u32 ar9580_1p0_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00041983, 0x00041983, 0x00041981, 0x00041982},
{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 11/13] ath9k: enable manual peak cal for all ar9300 chips
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (9 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 10/13] ath9k: Update AR9580 initvals miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 12/13] ath9k: use AR_SREV_9003_PCOEM to identify PCOEM chips miaoqing
` (2 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
HW peak detect calibration would fail, enable all ar9300
chips manual peak calibration instead.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 0c39199..99bc1a6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1641,14 +1641,12 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
skip_tx_iqcal:
if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
- if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) ||
- AR_SREV_9561(ah)) {
- for (i = 0; i < AR9300_MAX_CHAINS; i++) {
- if (!(ah->rxchainmask & (1 << i)))
- continue;
- ar9003_hw_manual_peak_cal(ah, i,
- IS_CHAN_2GHZ(chan));
- }
+ for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+ if (!(ah->rxchainmask & (1 << i)))
+ continue;
+
+ ar9003_hw_manual_peak_cal(ah, i,
+ IS_CHAN_2GHZ(chan));
}
/*
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 12/13] ath9k: use AR_SREV_9003_PCOEM to identify PCOEM chips
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (10 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 11/13] ath9k: enable manual peak cal for all ar9300 chips miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-02-26 8:08 ` [PATCH 13/13] ath9k: set correct peak detect threshold miaoqing
2016-03-11 12:16 ` [PATCH 00/13] disable hw peak cal for all ar9300 chips Valo, Kalle
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
commit f49c90db4d23 ("ath9k: Add a macro to identify PCOEM chips")
defined AR_SREV_9003_PCOEM macro, its more clear to use the macro
instead of checking one by one. Also removed PCOEM chips checking
in the callback of ar9003_hw_do_pcoem_manual_peak_cal() which only
for PCOEM chips.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 99bc1a6..e1573ab 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1311,9 +1311,6 @@ static void ar9003_hw_do_pcoem_manual_peak_cal(struct ath_hw *ah,
struct ath9k_hw_cal_data *caldata = ah->caldata;
int i;
- if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
- return;
-
if ((ah->caps.hw_caps & ATH9K_HW_CAP_RTT) && !run_rtt_cal)
return;
@@ -1707,7 +1704,7 @@ void ar9003_hw_attach_calib_ops(struct ath_hw *ah)
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
struct ath_hw_ops *ops = ath9k_hw_ops(ah);
- if (AR_SREV_9485(ah) || AR_SREV_9462(ah) || AR_SREV_9565(ah))
+ if (AR_SREV_9003_PCOEM(ah))
priv_ops->init_cal = ar9003_hw_init_cal_pcoem;
else
priv_ops->init_cal = ar9003_hw_init_cal_soc;
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 13/13] ath9k: set correct peak detect threshold
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (11 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 12/13] ath9k: use AR_SREV_9003_PCOEM to identify PCOEM chips miaoqing
@ 2016-02-26 8:08 ` miaoqing
2016-03-11 12:16 ` [PATCH 00/13] disable hw peak cal for all ar9300 chips Valo, Kalle
13 siblings, 0 replies; 15+ messages in thread
From: miaoqing @ 2016-02-26 8:08 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, ath9k-devel, kvalo, Miaoqing Pan
From: Miaoqing Pan <miaoqing@codeaurora.org>
Set QCA9561 peak detect threshold to 11.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index e1573ab..518e649 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1203,12 +1203,12 @@ static void ar9003_hw_tx_iq_cal_reload(struct ath_hw *ah)
static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
{
int offset[8] = {0}, total = 0, test;
- int agc_out, i, peak_detect_threshold;
+ int agc_out, i, peak_detect_threshold = 0;
if (AR_SREV_9550(ah) || AR_SREV_9531(ah))
peak_detect_threshold = 8;
- else
- peak_detect_threshold = 0;
+ else if (AR_SREV_9561(ah))
+ peak_detect_threshold = 11;
/*
* Turn off LNA/SW.
@@ -1249,17 +1249,14 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);
- if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) ||
- AR_SREV_9561(ah)) {
- if (is_2g)
- REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
- AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
- peak_detect_threshold);
- else
- REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
- AR_PHY_65NM_RXRF_AGC_AGC5G_DBDAC_OVR,
- peak_detect_threshold);
- }
+ if (is_2g)
+ REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
+ AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
+ peak_detect_threshold);
+ else
+ REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
+ AR_PHY_65NM_RXRF_AGC_AGC5G_DBDAC_OVR,
+ peak_detect_threshold);
for (i = 6; i > 0; i--) {
offset[i] = BIT(i - 1);
--
1.9.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 00/13] disable hw peak cal for all ar9300 chips
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
` (12 preceding siblings ...)
2016-02-26 8:08 ` [PATCH 13/13] ath9k: set correct peak detect threshold miaoqing
@ 2016-03-11 12:16 ` Valo, Kalle
13 siblings, 0 replies; 15+ messages in thread
From: Valo, Kalle @ 2016-03-11 12:16 UTC (permalink / raw)
To: miaoqing@codeaurora.org
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
ath9k-devel
miaoqing@codeaurora.org writes:
> From: Miaoqing Pan <miaoqing@codeaurora.org>
>
> HW peak detect calibration would fail for AR9300 chips and
> we went for implementing the SW way of doing it instead of
> HW doing the peak detect calibration.
>
> Miaoqing Pan (13):
> ath9k: Update QCA953x initvals
> ath9k: Update AR9003 2.2 initvals
> ath9k: Update AR933x initvals
> ath9k: Update AR9340 initvals
> ath9k: Update AR9462 initvals
> ath9k: Update AR9485 initvals
> ath9k: Update AR955x initvals
> ath9k: Update AR9565 initvals
> ath9k: Update QCA956x initvals
> ath9k: Update AR9580 initvals
> ath9k: enable manual peak cal for all ar9300 chips
> ath9k: use AR_SREV_9003_PCOEM to identify PCOEM chips
> ath9k: set correct peak detect threshold
Applied to ath.git, thanks.
--
Kalle Valo
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2016-03-11 12:16 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-26 8:08 [PATCH 00/13] disable hw peak cal for all ar9300 chips miaoqing
2016-02-26 8:08 ` [PATCH 01/13] ath9k: Update QCA953x initvals miaoqing
2016-02-26 8:08 ` [PATCH 02/13] ath9k: Update AR9003 2.2 initvals miaoqing
2016-02-26 8:08 ` [PATCH 03/13] ath9k: Update AR933x initvals miaoqing
2016-02-26 8:08 ` [PATCH 04/13] ath9k: Update AR9340 initvals miaoqing
2016-02-26 8:08 ` [PATCH 05/13] ath9k: Update AR9462 initvals miaoqing
2016-02-26 8:08 ` [PATCH 06/13] ath9k: Update AR9485 initvals miaoqing
2016-02-26 8:08 ` [PATCH 07/13] ath9k: Update AR955x initvals miaoqing
2016-02-26 8:08 ` [PATCH 08/13] ath9k: Update AR9565 initvals miaoqing
2016-02-26 8:08 ` [PATCH 09/13] ath9k: Update QCA956x initvals miaoqing
2016-02-26 8:08 ` [PATCH 10/13] ath9k: Update AR9580 initvals miaoqing
2016-02-26 8:08 ` [PATCH 11/13] ath9k: enable manual peak cal for all ar9300 chips miaoqing
2016-02-26 8:08 ` [PATCH 12/13] ath9k: use AR_SREV_9003_PCOEM to identify PCOEM chips miaoqing
2016-02-26 8:08 ` [PATCH 13/13] ath9k: set correct peak detect threshold miaoqing
2016-03-11 12:16 ` [PATCH 00/13] disable hw peak cal for all ar9300 chips Valo, Kalle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).