From: Eliad Peller <eliad@wizery.com>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 2/2] wlcore/wl18xx: add radar_debug_mode handling
Date: Sun, 6 Mar 2016 19:15:34 +0200 [thread overview]
Message-ID: <1457284534-10789-2-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1457284534-10789-1-git-send-email-eliad@wizery.com>
Add debugfs key (under CFG80211_CERTIFICATION_ONUS
configuration) to set/clear radar_debug_mode.
In this mode, the driver simply ignores radar
events (but prints them).
The fw is notified about this mode through
a special generic_cfg_feature command.
This mode is relevant only for ap mode. look for
it when initializing ap vif.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl18xx/debugfs.c | 66 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ti/wl18xx/event.c | 3 +-
drivers/net/wireless/ti/wlcore/init.c | 5 +++
drivers/net/wireless/ti/wlcore/wlcore.h | 1 +
4 files changed, 74 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ti/wl18xx/debugfs.c b/drivers/net/wireless/ti/wl18xx/debugfs.c
index 4edfe28..86ccf84 100644
--- a/drivers/net/wireless/ti/wl18xx/debugfs.c
+++ b/drivers/net/wireless/ti/wl18xx/debugfs.c
@@ -345,6 +345,69 @@ static const struct file_operations dynamic_fw_traces_ops = {
.llseek = default_llseek,
};
+#ifdef CONFIG_CFG80211_CERTIFICATION_ONUS
+static ssize_t radar_debug_mode_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ struct wl12xx_vif *wlvif;
+ unsigned long value;
+ int ret;
+
+ ret = kstrtoul_from_user(user_buf, count, 10, &value);
+ if (ret < 0) {
+ wl1271_warning("illegal radar_debug_mode value!");
+ return -EINVAL;
+ }
+
+ /* valid values: 0/1 */
+ if (!(value == 0 || value == 1)) {
+ wl1271_warning("value is not in valid!");
+ return -EINVAL;
+ }
+
+ mutex_lock(&wl->mutex);
+
+ wl->radar_debug_mode = value;
+
+ if (unlikely(wl->state != WLCORE_STATE_ON))
+ goto out;
+
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ wl12xx_for_each_wlvif_ap(wl, wlvif) {
+ wlcore_cmd_generic_cfg(wl, wlvif,
+ WLCORE_CFG_FEATURE_RADAR_DEBUG,
+ wl->radar_debug_mode, 0);
+ }
+
+ wl1271_ps_elp_sleep(wl);
+out:
+ mutex_unlock(&wl->mutex);
+ return count;
+}
+
+static ssize_t radar_debug_mode_read(struct file *file,
+ char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+
+ return wl1271_format_buffer(userbuf, count, ppos,
+ "%d\n", wl->radar_debug_mode);
+}
+
+static const struct file_operations radar_debug_mode_ops = {
+ .write = radar_debug_mode_write,
+ .read = radar_debug_mode_read,
+ .open = simple_open,
+ .llseek = default_llseek,
+};
+#endif /* CFG80211_CERTIFICATION_ONUS */
+
int wl18xx_debugfs_add_files(struct wl1271 *wl,
struct dentry *rootdir)
{
@@ -510,6 +573,9 @@ int wl18xx_debugfs_add_files(struct wl1271 *wl,
DEBUGFS_ADD(conf, moddir);
DEBUGFS_ADD(radar_detection, moddir);
+#ifdef CONFIG_CFG80211_CERTIFICATION_ONUS
+ DEBUGFS_ADD(radar_debug_mode, moddir);
+#endif
DEBUGFS_ADD(dynamic_fw_traces, moddir);
return 0;
diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c
index 719907a..ff6e46d 100644
--- a/drivers/net/wireless/ti/wl18xx/event.c
+++ b/drivers/net/wireless/ti/wl18xx/event.c
@@ -146,7 +146,8 @@ int wl18xx_process_mailbox_events(struct wl1271 *wl)
mbox->radar_channel,
wl18xx_radar_type_decode(mbox->radar_type));
- ieee80211_radar_detected(wl->hw);
+ if (!wl->radar_debug_mode)
+ ieee80211_radar_detected(wl->hw);
}
if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index e92f263..d0b7734 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -558,6 +558,11 @@ static int wl12xx_init_ap_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
if (ret < 0)
return ret;
+ if (wl->radar_debug_mode)
+ wlcore_cmd_generic_cfg(wl, wlvif,
+ WLCORE_CFG_FEATURE_RADAR_DEBUG,
+ wl->radar_debug_mode, 0);
+
return 0;
}
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index dda01b1..72c31a8 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -463,6 +463,7 @@ struct wl1271 {
/* the current dfs region */
enum nl80211_dfs_regions dfs_region;
+ bool radar_debug_mode;
/* size of the private FW status data */
size_t fw_status_len;
--
2.6.3
next prev parent reply other threads:[~2016-03-06 17:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-06 17:15 [PATCH 1/2] wlcore: don't WARN_ON in case of existing ROC Eliad Peller
2016-03-06 17:15 ` Eliad Peller [this message]
2016-03-06 17:33 ` kbuild test robot
2016-03-06 17:47 ` kbuild test robot
2016-03-06 19:32 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457284534-10789-2-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).