From: Johannes Berg <johannes@sipsolutions.net>
To: Purushottam Kushwaha <pkushwah@qti.qualcomm.com>
Cc: linux-wireless@vger.kernel.org, jouni@qca.qualcomm.com,
usdutt@qti.qualcomm.com, amarnath@qca.qualcomm.com
Subject: Re: [PATCH v10] cfg80211: Provision to allow the support for different beacon intervals
Date: Thu, 13 Oct 2016 13:46:19 +0200 [thread overview]
Message-ID: <1476359179.4904.16.camel@sipsolutions.net> (raw)
In-Reply-To: <1476277011-6937-1-git-send-email-pkushwah@qti.qualcomm.com>
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> @@ -421,6 +421,8 @@ static int brcmf_vif_change_validate(struct
> brcmf_cfg80211_info *cfg,
> .num_different_channels = 1,
> .radar_detect = 0,
> .iftype_num = {0},
> + .beacon_gcd = 0,
> + .diff_bi = false,
> };
>
> list_for_each_entry(pos, &cfg->vif_list, list)
> @@ -446,6 +448,8 @@ static int brcmf_vif_add_validate(struct
> brcmf_cfg80211_info *cfg,
> .num_different_channels = 1,
> .radar_detect = 0,
> .iftype_num = {0},
> + .beacon_gcd = 0,
> + .diff_bi = false,
> };
You don't need this now, since the default is 0/false, so we don't have
to touch this file. I already removed some of the other useless
initializers in the previous patch, and will edit this out as well - no
need to resend.
> list_for_each_entry(pos, &cfg->vif_list, list)
> diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> index 21bbe44..f0bcd55 100644
> --- a/include/net/cfg80211.h
> +++ b/include/net/cfg80211.h
> @@ -784,11 +784,15 @@ struct cfg80211_csa_settings {
> * @iftype_num: array with the numbers of interfaces of each
> interface
> * type. The index is the interface type as specified in
> &enum
> * nl80211_iftype.
> + * @beacon_gcd: a value specifying GCD of all beaconing interfaces.
> + * @diff_bi: a flag which denotes beacon intervals are different or
> same.
I think I'll rename both to beacon_* or *_bi, but I don't really like
the difference in naming here.
> */
> struct iface_combination_params {
> int num_different_channels;
> u8 radar_detect;
> int iftype_num[NUM_NL80211_IFTYPES];
> + u32 beacon_gcd;
> + bool diff_bi;
> };
>
> /**
> @@ -3100,6 +3104,12 @@ struct ieee80211_iface_limit {
> * only in special cases.
> * @radar_detect_widths: bitmap of channel widths supported for
> radar detection
> * @radar_detect_regions: bitmap of regions supported for radar
> detection
> + * @beacon_int_min_gcd: This interface combination supports
> different
> + * beacon intervals.
> + * = 0 - all beacon intervals for different interface must be
> same.
> + * > 0 - any beacon interval for the interface part of this
> combination AND
> + * *GCD* of all beacon intervals from beaconing
> interfaces of this
> + * combination must be greator or equal to this value.
typo: greater - will also fix
> * With this structure the driver can describe which interface
> * combinations it supports concurrently.
> @@ -3120,7 +3130,7 @@ struct ieee80211_iface_limit {
> * };
> *
> *
> - * 2. Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
> + * 2. Allow #{AP, P2P-GO} <= 8, BI min gcd = 10, channels = 1, 8
> total:
> *
> * struct ieee80211_iface_limit limits2[] = {
> * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
> @@ -3131,6 +3141,7 @@ struct ieee80211_iface_limit {
> * .n_limits = ARRAY_SIZE(limits2),
> * .max_interfaces = 8,
> * .num_different_channels = 1,
> + * .beacon_int_min_gcd = 10,
> * };
> *
> *
> @@ -3158,6 +3169,7 @@ struct ieee80211_iface_combination {
> bool beacon_int_infra_match;
> u8 radar_detect_widths;
> u8 radar_detect_regions;
> + u32 beacon_int_min_gcd;
> };
>
> struct ieee80211_txrx_stypes {
> diff --git a/include/uapi/linux/nl80211.h
> b/include/uapi/linux/nl80211.h
> index 56368e9..3c19cca 100644
> --- a/include/uapi/linux/nl80211.h
> +++ b/include/uapi/linux/nl80211.h
> @@ -4280,6 +4280,9 @@ enum nl80211_iface_limit_attrs {
> * of supported channel widths for radar detection.
> * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute
> containing the bitmap
> * of supported regulatory regions for radar detection.
> + * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the
> minimum GCD of
> + * different beacon intervals supported by all the interface
> combinations
> + * in this group (if not present, all beacon interval must
> match).
beacon intervals
> * @NUM_NL80211_IFACE_COMB: number of attributes
> * @MAX_NL80211_IFACE_COMB: highest attribute number
> *
> @@ -4287,8 +4290,8 @@ enum nl80211_iface_limit_attrs {
> * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI,
> channels = 1, max = 2
> * => allows an AP and a STA that must match BIs
> *
> - * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
> - * => allows 8 of AP/GO
> + * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels =
> 1, max = 8,
> + * => allows 8 of AP/GO that can have BI gcd >= min gcd
> *
> * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
> * => allows two STAs on different channels
> @@ -4314,6 +4317,7 @@ enum nl80211_if_combination_attrs {
> NL80211_IFACE_COMB_NUM_CHANNELS,
> NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
> NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
> + NL80211_IFACE_COMB_BI_MIN_GCD,
>
> /* keep last */
> NUM_NL80211_IFACE_COMB,
> diff --git a/net/wireless/core.h b/net/wireless/core.h
> index 08d2e94..21e3188 100644
> --- a/net/wireless/core.h
> +++ b/net/wireless/core.h
> @@ -475,7 +475,7 @@ int ieee80211_get_ratemask(struct
> ieee80211_supported_band *sband,
> u32 *mask);
>
> int cfg80211_validate_beacon_int(struct cfg80211_registered_device
> *rdev,
> - u32 beacon_int);
> + enum nl80211_iftype iftype, u32
> beacon_int);
>
> void cfg80211_update_iface_num(struct cfg80211_registered_device
> *rdev,
> enum nl80211_iftype iftype, int num);
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index c510810..903cd5a 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -1075,6 +1075,10 @@ static int
> nl80211_put_iface_combinations(struct wiphy *wiphy,
> nla_put_u32(msg,
> NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
> c->radar_detect_regions)))
> goto nla_put_failure;
> + if (c->beacon_int_min_gcd &&
> + nla_put_u32(msg, NL80211_IFACE_COMB_BI_MIN_GCD,
> + c->beacon_int_min_gcd))
> + goto nla_put_failure;
>
> nla_nest_end(msg, nl_combi);
> }
> @@ -3803,7 +3807,8 @@ static int nl80211_start_ap(struct sk_buff
> *skb, struct genl_info *info)
> params.dtim_period =
> nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
>
> - err = cfg80211_validate_beacon_int(rdev,
> params.beacon_interval);
> + err = cfg80211_validate_beacon_int(rdev, dev->ieee80211_ptr-
> >iftype,
> + params.beacon_interval);
> if (err)
> return err;
>
> @@ -8152,7 +8157,8 @@ static int nl80211_join_ibss(struct sk_buff
> *skb, struct genl_info *info)
> ibss.beacon_interval =
> nla_get_u32(info-
> >attrs[NL80211_ATTR_BEACON_INTERVAL]);
>
> - err = cfg80211_validate_beacon_int(rdev,
> ibss.beacon_interval);
> + err = cfg80211_validate_beacon_int(rdev,
> NL80211_IFTYPE_ADHOC,
> + ibss.beacon_interval);
> if (err)
> return err;
>
> @@ -9417,7 +9423,9 @@ static int nl80211_join_mesh(struct sk_buff
> *skb, struct genl_info *info)
> setup.beacon_interval =
> nla_get_u32(info-
> >attrs[NL80211_ATTR_BEACON_INTERVAL]);
>
> - err = cfg80211_validate_beacon_int(rdev,
> setup.beacon_interval);
> + err = cfg80211_validate_beacon_int(rdev,
> + NL80211_IFTYPE_ME
> SH_POINT,
> + setup.beacon_inte
> rval);
> if (err)
> return err;
> }
> diff --git a/net/wireless/util.c b/net/wireless/util.c
> index 0d69b25..3f3d684 100644
> --- a/net/wireless/util.c
> +++ b/net/wireless/util.c
> @@ -1559,24 +1559,49 @@ bool
> ieee80211_chandef_to_operating_class(struct cfg80211_chan_def
> *chandef,
> EXPORT_SYMBOL(ieee80211_chandef_to_operating_class);
>
> int cfg80211_validate_beacon_int(struct cfg80211_registered_device
> *rdev,
> + enum nl80211_iftype iftype,
> u32 beacon_int)
> {
> struct wireless_dev *wdev;
> int res = 0;
> + u32 bi_prev, tmp_bi;
> + struct iface_combination_params params = {
> + .num_different_channels = 0,
> + .radar_detect = 0,
> + .iftype_num = {0},
> + .beacon_gcd = beacon_int, /* GCD(n) = n */
> + .diff_bi = false,
> + };
>
> if (beacon_int < 10 || beacon_int > 10000)
> return -EINVAL;
>
> + params.iftype_num[iftype] = 1;
> + list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
> + if (!wdev->beacon_interval)
> + continue;
> +
> + params.iftype_num[wdev->iftype]++;
> + }
> +
> list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
> if (!wdev->beacon_interval)
> continue;
> if (wdev->beacon_interval != beacon_int) {
> - res = -EINVAL;
> + params.diff_bi = true;
> + /* Get the GCD */
> + bi_prev = wdev->beacon_interval;
> + while (bi_prev != 0) {
> + tmp_bi = bi_prev;
> + bi_prev = params.beacon_gcd %
> bi_prev;
> + params.beacon_gcd = tmp_bi;
> + }
> break;
> }
> }
>
> - return res;
> + res = cfg80211_check_combinations(&rdev->wiphy, ¶ms);
> + return (res < 0) ? res : 0;
> }
>
> int cfg80211_iter_combinations(struct wiphy *wiphy,
> @@ -1652,6 +1677,14 @@ int cfg80211_iter_combinations(struct wiphy
> *wiphy,
> if ((all_iftypes & used_iftypes) != used_iftypes)
> goto cont;
>
> + if (params->beacon_gcd) {
> + if (c->beacon_int_min_gcd &&
> + params->beacon_gcd < c-
> >beacon_int_min_gcd)
> + return -EINVAL;
> + if (!c->beacon_int_min_gcd && params-
> >diff_bi)
> + goto cont;
> + }
>
Otherwise looks good.
johannes
next prev parent reply other threads:[~2016-10-13 11:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-12 12:56 [PATCH v10] cfg80211: Provision to allow the support for different beacon intervals Purushottam Kushwaha
2016-10-13 11:46 ` Johannes Berg [this message]
2016-10-13 12:30 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476359179.4904.16.camel@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=amarnath@qca.qualcomm.com \
--cc=jouni@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=pkushwah@qti.qualcomm.com \
--cc=usdutt@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).