From: Maya Erez <qca_merez@qca.qualcomm.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Lior David <qca_liord@qca.qualcomm.com>,
linux-wireless@vger.kernel.org, wil6210@qca.qualcomm.com,
Maya Erez <qca_merez@qca.qualcomm.com>
Subject: [PATCH 5/7] wil6210: align to latest auto generated wmi.h
Date: Sat, 29 Oct 2016 08:51:25 +0300 [thread overview]
Message-ID: <1477720287-17606-6-git-send-email-qca_merez@qca.qualcomm.com> (raw)
In-Reply-To: <1477720287-17606-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lior David <qca_liord@qca.qualcomm.com>
Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.h | 208 ++++++++++++++++++++++++++++++++-
1 file changed, 206 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index f430e8a..2cc7775 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -51,8 +51,10 @@ enum wmi_mid {
* the host
*/
enum wmi_fw_capability {
- WMI_FW_CAPABILITY_FTM = 0,
- WMI_FW_CAPABILITY_PS_CONFIG = 1,
+ WMI_FW_CAPABILITY_FTM = 0,
+ WMI_FW_CAPABILITY_PS_CONFIG = 1,
+ WMI_FW_CAPABILITY_RF_SECTORS = 2,
+ WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT = 3,
WMI_FW_CAPABILITY_MAX,
};
@@ -182,11 +184,18 @@ enum wmi_command_id {
WMI_RS_CFG_CMDID = 0x921,
WMI_GET_DETAILED_RS_RES_CMDID = 0x922,
WMI_AOA_MEAS_CMDID = 0x923,
+ WMI_SET_MGMT_RETRY_LIMIT_CMDID = 0x930,
+ WMI_GET_MGMT_RETRY_LIMIT_CMDID = 0x931,
WMI_TOF_SESSION_START_CMDID = 0x991,
WMI_TOF_GET_CAPABILITIES_CMDID = 0x992,
WMI_TOF_SET_LCR_CMDID = 0x993,
WMI_TOF_SET_LCI_CMDID = 0x994,
WMI_TOF_CHANNEL_INFO_CMDID = 0x995,
+ WMI_GET_RF_SECTOR_PARAMS_CMDID = 0x9A0,
+ WMI_SET_RF_SECTOR_PARAMS_CMDID = 0x9A1,
+ WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A2,
+ WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A3,
+ WMI_SET_RF_SECTOR_ON_CMDID = 0x9A4,
WMI_SET_MAC_ADDRESS_CMDID = 0xF003,
WMI_ABORT_SCAN_CMDID = 0xF007,
WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041,
@@ -879,6 +888,14 @@ struct wmi_aoa_meas_cmd {
__le32 meas_rf_mask;
} __packed;
+/* WMI_SET_MGMT_RETRY_LIMIT_CMDID */
+struct wmi_set_mgmt_retry_limit_cmd {
+ /* MAC retransmit limit for mgmt frames */
+ u8 mgmt_retry_limit;
+ /* alignment to 32b */
+ u8 reserved[3];
+} __packed;
+
enum wmi_tof_burst_duration {
WMI_TOF_BURST_DURATION_250_USEC = 2,
WMI_TOF_BURST_DURATION_500_USEC = 3,
@@ -1035,12 +1052,19 @@ enum wmi_event_id {
WMI_RS_CFG_DONE_EVENTID = 0x1921,
WMI_GET_DETAILED_RS_RES_EVENTID = 0x1922,
WMI_AOA_MEAS_EVENTID = 0x1923,
+ WMI_SET_MGMT_RETRY_LIMIT_EVENTID = 0x1930,
+ WMI_GET_MGMT_RETRY_LIMIT_EVENTID = 0x1931,
WMI_TOF_SESSION_END_EVENTID = 0x1991,
WMI_TOF_GET_CAPABILITIES_EVENTID = 0x1992,
WMI_TOF_SET_LCR_EVENTID = 0x1993,
WMI_TOF_SET_LCI_EVENTID = 0x1994,
WMI_TOF_FTM_PER_DEST_RES_EVENTID = 0x1995,
WMI_TOF_CHANNEL_INFO_EVENTID = 0x1996,
+ WMI_GET_RF_SECTOR_PARAMS_DONE_EVENTID = 0x19A0,
+ WMI_SET_RF_SECTOR_PARAMS_DONE_EVENTID = 0x19A1,
+ WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID = 0x19A2,
+ WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID = 0x19A3,
+ WMI_SET_RF_SECTOR_ON_DONE_EVENTID = 0x19A4,
WMI_SET_CHANNEL_EVENTID = 0x9000,
WMI_ASSOC_REQ_EVENTID = 0x9001,
WMI_EAPOL_RX_EVENTID = 0x9002,
@@ -2070,6 +2094,22 @@ struct wmi_aoa_meas_event {
u8 meas_data[WMI_AOA_MAX_DATA_SIZE];
} __packed;
+/* WMI_SET_MGMT_RETRY_LIMIT_EVENTID */
+struct wmi_set_mgmt_retry_limit_event {
+ /* enum wmi_fw_status */
+ u8 status;
+ /* alignment to 32b */
+ u8 reserved[3];
+} __packed;
+
+/* WMI_GET_MGMT_RETRY_LIMIT_EVENTID */
+struct wmi_get_mgmt_retry_limit_event {
+ /* MAC retransmit limit for mgmt frames */
+ u8 mgmt_retry_limit;
+ /* alignment to 32b */
+ u8 reserved[3];
+} __packed;
+
/* WMI_TOF_GET_CAPABILITIES_EVENTID */
struct wmi_tof_get_capabilities_event {
u8 ftm_capability;
@@ -2184,4 +2224,168 @@ struct wmi_tof_channel_info_event {
u8 report[0];
} __packed;
+/* Result status codes for WMI commands */
+enum wmi_rf_sector_status {
+ WMI_RF_SECTOR_STATUS_SUCCESS = 0x00,
+ WMI_RF_SECTOR_STATUS_BAD_PARAMETERS_ERROR = 0x01,
+ WMI_RF_SECTOR_STATUS_BUSY_ERROR = 0x02,
+ WMI_RF_SECTOR_STATUS_NOT_SUPPORTED_ERROR = 0x03,
+};
+
+/* Types of the RF sector (TX,RX) */
+enum wmi_rf_sector_type {
+ WMI_RF_SECTOR_TYPE_RX = 0x00,
+ WMI_RF_SECTOR_TYPE_TX = 0x01,
+};
+
+/* Content of RF Sector (six 32-bits registers) */
+struct wmi_rf_sector_info {
+ /* Phase values for RF Chains[15-0] (2bits per RF chain) */
+ __le32 psh_hi;
+ /* Phase values for RF Chains[31-16] (2bits per RF chain) */
+ __le32 psh_lo;
+ /* ETYPE Bit0 for all RF chains[31-0] - bit0 of Edge amplifier gain
+ * index
+ */
+ __le32 etype0;
+ /* ETYPE Bit1 for all RF chains[31-0] - bit1 of Edge amplifier gain
+ * index
+ */
+ __le32 etype1;
+ /* ETYPE Bit2 for all RF chains[31-0] - bit2 of Edge amplifier gain
+ * index
+ */
+ __le32 etype2;
+ /* D-Type values (3bits each) for 8 Distribution amplifiers + X16
+ * switch bits
+ */
+ __le32 dtype_swch_off;
+} __packed;
+
+#define WMI_INVALID_RF_SECTOR_INDEX (0xFFFF)
+#define WMI_MAX_RF_MODULES_NUM (8)
+
+/* WMI_GET_RF_SECTOR_PARAMS_CMD */
+struct wmi_get_rf_sector_params_cmd {
+ /* Sector number to be retrieved */
+ __le16 sector_idx;
+ /* enum wmi_rf_sector_type - type of requested RF sector */
+ u8 sector_type;
+ /* bitmask vector specifying destination RF modules */
+ u8 rf_modules_vec;
+} __packed;
+
+/* \WMI_GET_RF_SECTOR_PARAMS_DONE_EVENT */
+struct wmi_get_rf_sector_params_done_event {
+ /* result status of WMI_GET_RF_SECTOR_PARAMS_CMD (enum
+ * wmi_rf_sector_status)
+ */
+ u8 status;
+ /* align next field to U64 boundary */
+ u8 reserved[7];
+ /* TSF timestamp when RF sectors where retrieved */
+ __le64 tsf;
+ /* Content of RF sector retrieved from each RF module */
+ struct wmi_rf_sector_info sectors_info[WMI_MAX_RF_MODULES_NUM];
+} __packed;
+
+/* WMI_SET_RF_SECTOR_PARAMS_CMD */
+struct wmi_set_rf_sector_params_cmd {
+ /* Sector number to be retrieved */
+ __le16 sector_idx;
+ /* enum wmi_rf_sector_type - type of requested RF sector */
+ u8 sector_type;
+ /* bitmask vector specifying destination RF modules */
+ u8 rf_modules_vec;
+ /* Content of RF sector to be written to each RF module */
+ struct wmi_rf_sector_info sectors_info[WMI_MAX_RF_MODULES_NUM];
+} __packed;
+
+/* \WMI_SET_RF_SECTOR_PARAMS_DONE_EVENT */
+struct wmi_set_rf_sector_params_done_event {
+ /* result status of WMI_SET_RF_SECTOR_PARAMS_CMD (enum
+ * wmi_rf_sector_status)
+ */
+ u8 status;
+} __packed;
+
+/* WMI_GET_SELECTED_RF_SECTOR_INDEX_CMD - Get RF sector index selected by
+ * TXSS/BRP for communication with specified CID
+ */
+struct wmi_get_selected_rf_sector_index_cmd {
+ /* Connection/Station ID in [0:7] range */
+ u8 cid;
+ /* type of requested RF sector (enum wmi_rf_sector_type) */
+ u8 sector_type;
+ /* align to U32 boundary */
+ u8 reserved[2];
+} __packed;
+
+/* \WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENT - Returns retrieved RF sector
+ * index selected by TXSS/BRP for communication with specified CID
+ */
+struct wmi_get_selected_rf_sector_index_done_event {
+ /* Retrieved sector index selected in TXSS (for TX sector request) or
+ * BRP (for RX sector request)
+ */
+ __le16 sector_idx;
+ /* result status of WMI_GET_SELECTED_RF_SECTOR_INDEX_CMD (enum
+ * wmi_rf_sector_status)
+ */
+ u8 status;
+ /* align next field to U64 boundary */
+ u8 reserved[5];
+ /* TSF timestamp when result was retrieved */
+ __le64 tsf;
+} __packed;
+
+/* WMI_SET_SELECTED_RF_SECTOR_INDEX_CMD - Force RF sector index for
+ * communication with specified CID. Assumes that TXSS/BRP is disabled by
+ * other command
+ */
+struct wmi_set_selected_rf_sector_index_cmd {
+ /* Connection/Station ID in [0:7] range */
+ u8 cid;
+ /* type of requested RF sector (enum wmi_rf_sector_type) */
+ u8 sector_type;
+ /* Forced sector index */
+ __le16 sector_idx;
+} __packed;
+
+/* \WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENT - Success/Fail status for
+ * WMI_SET_SELECTED_RF_SECTOR_INDEX_CMD
+ */
+struct wmi_set_selected_rf_sector_index_done_event {
+ /* result status of WMI_SET_SELECTED_RF_SECTOR_INDEX_CMD (enum
+ * wmi_rf_sector_status)
+ */
+ u8 status;
+ /* align to U32 boundary */
+ u8 reserved[3];
+} __packed;
+
+/* WMI_SET_RF_SECTOR_ON_CMD - Activates specified sector for specified rf
+ * modules
+ */
+struct wmi_set_rf_sector_on_cmd {
+ /* Sector index to be activated */
+ __le16 sector_idx;
+ /* type of requested RF sector (enum wmi_rf_sector_type) */
+ u8 sector_type;
+ /* bitmask vector specifying destination RF modules */
+ u8 rf_modules_vec;
+} __packed;
+
+/* \WMI_SET_RF_SECTOR_ON_DONE_EVENT - Success/Fail status for
+ * WMI_SET_RF_SECTOR_ON_CMD
+ */
+struct wmi_set_rf_sector_on_done_event {
+ /* result status of WMI_SET_RF_SECTOR_ON_CMD (enum
+ * wmi_rf_sector_status)
+ */
+ u8 status;
+ /* align to U32 boundary */
+ u8 reserved[3];
+} __packed;
+
#endif /* __WILOCITY_WMI_H__ */
--
1.9.1
next prev parent reply other threads:[~2016-10-29 5:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-29 5:51 [PATCH 0/7] wil6210 patches Maya Erez
2016-10-29 5:51 ` [PATCH 1/7] wil6210: fix net queue stop/wake Maya Erez
2016-11-23 14:51 ` [1/7] " Kalle Valo
2016-10-29 5:51 ` [PATCH 2/7] wil6210: add support for power save enable / disable Maya Erez
2016-10-29 5:51 ` [PATCH 3/7] wil6210: fix deadlock when using fw_no_recovery option Maya Erez
2016-10-29 5:51 ` [PATCH 4/7] wil6210: add support for abort scan Maya Erez
2016-10-29 5:51 ` Maya Erez [this message]
2016-10-29 5:51 ` [PATCH 6/7] wil6210: support NL80211_ATTR_WIPHY_RETRY_SHORT Maya Erez
2016-10-29 5:51 ` [PATCH 7/7] wil6210: low level RF sector API Maya Erez
2017-05-12 14:01 ` [7/7] " Kalle Valo
2017-05-14 7:21 ` qca_merez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477720287-17606-6-git-send-email-qca_merez@qca.qualcomm.com \
--to=qca_merez@qca.qualcomm.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=qca_liord@qca.qualcomm.com \
--cc=wil6210@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox