From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC v2 09/11] ath10k: Mailbox address definitions
Date: Fri, 18 Nov 2016 20:22:49 +0100 [thread overview]
Message-ID: <1479496971-19174-10-git-send-email-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <1479496971-19174-1-git-send-email-erik.stromdahl@gmail.com>
Address definitions for SDIO/mbox based chipsets.
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
drivers/net/wireless/ath/ath10k/hw.h | 53 ++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 883547f..46142e9 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -814,6 +814,59 @@ struct ath10k_hw_ops {
#define QCA9887_EEPROM_ADDR_LO_MASK 0x00ff0000
#define QCA9887_EEPROM_ADDR_LO_LSB 16
+#define MBOX_RESET_CONTROL_ADDRESS 0x00000000
+#define MBOX_HOST_INT_STATUS_ADDRESS 0x00000800
+#define MBOX_HOST_INT_STATUS_ERROR_LSB 7
+#define MBOX_HOST_INT_STATUS_ERROR_MASK 0x00000080
+#define MBOX_HOST_INT_STATUS_CPU_LSB 6
+#define MBOX_HOST_INT_STATUS_CPU_MASK 0x00000040
+#define MBOX_HOST_INT_STATUS_COUNTER_LSB 4
+#define MBOX_HOST_INT_STATUS_COUNTER_MASK 0x00000010
+#define MBOX_CPU_INT_STATUS_ADDRESS 0x00000801
+#define MBOX_ERROR_INT_STATUS_ADDRESS 0x00000802
+#define MBOX_ERROR_INT_STATUS_WAKEUP_LSB 2
+#define MBOX_ERROR_INT_STATUS_WAKEUP_MASK 0x00000004
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_LSB 1
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_MASK 0x00000002
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_LSB 0
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_MASK 0x00000001
+#define MBOX_COUNTER_INT_STATUS_ADDRESS 0x00000803
+#define MBOX_COUNTER_INT_STATUS_COUNTER_LSB 0
+#define MBOX_COUNTER_INT_STATUS_COUNTER_MASK 0x000000ff
+#define MBOX_RX_LOOKAHEAD_VALID_ADDRESS 0x00000805
+#define MBOX_INT_STATUS_ENABLE_ADDRESS 0x00000828
+#define MBOX_INT_STATUS_ENABLE_ERROR_LSB 7
+#define MBOX_INT_STATUS_ENABLE_ERROR_MASK 0x00000080
+#define MBOX_INT_STATUS_ENABLE_CPU_LSB 6
+#define MBOX_INT_STATUS_ENABLE_CPU_MASK 0x00000040
+#define MBOX_INT_STATUS_ENABLE_INT_LSB 5
+#define MBOX_INT_STATUS_ENABLE_INT_MASK 0x00000020
+#define MBOX_INT_STATUS_ENABLE_COUNTER_LSB 4
+#define MBOX_INT_STATUS_ENABLE_COUNTER_MASK 0x00000010
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_LSB 0
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_MASK 0x0000000f
+#define MBOX_CPU_INT_STATUS_ENABLE_ADDRESS 0x00000819
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_LSB 0
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_MASK 0x000000ff
+#define MBOX_ERROR_STATUS_ENABLE_ADDRESS 0x0000081a
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB 1
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB 0
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK 0x00000001
+#define MBOX_COUNTER_INT_STATUS_ENABLE_ADDRESS 0x0000081b
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_LSB 0
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_MASK 0x000000ff
+#define MBOX_COUNT_ADDRESS 0x00000820
+#define MBOX_COUNT_DEC_ADDRESS 0x00000840
+#define MBOX_WINDOW_DATA_ADDRESS 0x00000874
+#define MBOX_WINDOW_WRITE_ADDR_ADDRESS 0x00000878
+#define MBOX_WINDOW_READ_ADDR_ADDRESS 0x0000087c
+#define MBOX_CPU_DBG_SEL_ADDRESS 0x00000883
+#define MBOX_CPU_DBG_ADDRESS 0x00000884
+#define MBOX_RTC_BASE_ADDRESS 0x00000000
+#define MBOX_GPIO_BASE_ADDRESS 0x00005000
+#define MBOX_MBOX_BASE_ADDRESS 0x00008000
+
#define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB)
/* Register definitions for first generation ath10k cards. These cards include
--
1.7.9.5
next prev parent reply other threads:[~2016-11-18 19:24 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 19:22 [RFC v2 00/11] ath10k sdio support Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 01/11] ath10k: htc: made static function public Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 02/11] ath10k: htc: rx trailer lookahead support Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 03/11] ath10k: htc: Removal of unused struct members Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 04/11] ath10k: htc: Changed order of wait target and ep connect Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 05/11] ath10k: htc: refactorization Erik Stromdahl
2016-12-13 13:44 ` Valo, Kalle
2016-12-13 13:52 ` Michal Kazior
2016-12-13 17:26 ` Valo, Kalle
2016-12-13 18:37 ` Erik Stromdahl
2016-12-13 19:21 ` Michal Kazior
2016-12-14 13:49 ` Valo, Kalle
2016-12-14 13:46 ` Valo, Kalle
2016-12-14 21:07 ` Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 06/11] ath10k: htc: Added ATH10K_HTC_FLAG_BUNDLE_LSB Erik Stromdahl
2016-12-16 10:23 ` Valo, Kalle
2016-11-18 19:22 ` [RFC v2 07/11] ath10k: Added SDIO dbg masks Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 08/11] ath10k: Added ATH10K_BUS_SDIO enum Erik Stromdahl
2016-11-18 19:22 ` Erik Stromdahl [this message]
2016-11-18 19:22 ` [RFC v2 10/11] ath10k: Added more host_interest members Erik Stromdahl
2016-11-18 19:22 ` [RFC v2 11/11] ath10k: Added sdio support Erik Stromdahl
2016-12-13 13:10 ` Valo, Kalle
2016-12-15 16:40 ` Valo, Kalle
2016-12-15 20:52 ` Erik Stromdahl
2016-12-16 11:21 ` Valo, Kalle
2016-12-20 18:14 ` Erik Stromdahl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479496971-19174-10-git-send-email-erik.stromdahl@gmail.com \
--to=erik.stromdahl@gmail.com \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).