[PATCH 06/12] brcmfmac: make internal escan more generic

[Arend van Spriel <arend.vanspriel@broadcom.com>]

For scheduled scan we initiate an escan in firmware to obtain more
info missing from the scheduled scan notification we get from firmware.
For upcoming functionality this is also required so make it a bit
more generic.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 187 ++++++++++++---------
 .../broadcom/brcm80211/brcmfmac/cfg80211.h         |   4 +-
 2 files changed, 109 insertions(+), 82 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 70eca76..3d87055 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -757,12 +757,12 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
 	brcmf_scan_config_mpc(ifp, 1);
 
 	/*
-	 * e-scan can be initiated by scheduled scan
+	 * e-scan can be initiated internally
 	 * which takes precedence.
 	 */
-	if (cfg->sched_escan) {
+	if (cfg->internal_escan) {
 		brcmf_dbg(SCAN, "scheduled scan completed\n");
-		cfg->sched_escan = false;
+		cfg->internal_escan = false;
 		if (!aborted)
 			cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
 	} else if (scan_request) {
@@ -3013,7 +3013,7 @@ void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg)
 	struct escan_info *escan = &cfg->escan_info;
 
 	set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
-	if (cfg->scan_request) {
+	if (cfg->internal_escan || cfg->scan_request) {
 		escan->escan_state = WL_ESCAN_STATE_IDLE;
 		brcmf_notify_escan_complete(cfg, escan->ifp, true, true);
 	}
@@ -3036,7 +3036,7 @@ static void brcmf_escan_timeout(unsigned long data)
 	struct brcmf_cfg80211_info *cfg =
 			(struct brcmf_cfg80211_info *)data;
 
-	if (cfg->scan_request) {
+	if (cfg->internal_escan || cfg->scan_request) {
 		brcmf_err("timer expired\n");
 		schedule_work(&cfg->escan_timeout_work);
 	}
@@ -3119,7 +3119,7 @@ static void brcmf_escan_timeout(unsigned long data)
 		if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le))
 			goto exit;
 
-		if (!cfg->scan_request) {
+		if (!cfg->internal_escan && !cfg->scan_request) {
 			brcmf_dbg(SCAN, "result without cfg80211 request\n");
 			goto exit;
 		}
@@ -3165,7 +3165,7 @@ static void brcmf_escan_timeout(unsigned long data)
 		cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
 		if (brcmf_p2p_scan_finding_common_channel(cfg, NULL))
 			goto exit;
-		if (cfg->scan_request) {
+		if (cfg->internal_escan || cfg->scan_request) {
 			brcmf_inform_bss(cfg);
 			aborted = status != BRCMF_E_STATUS_SUCCESS;
 			brcmf_notify_escan_complete(cfg, ifp, aborted, false);
@@ -3190,6 +3190,73 @@ static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg)
 		  brcmf_cfg80211_escan_timeout_worker);
 }
 
+static struct cfg80211_scan_request *
+brcmf_alloc_internal_escan_request(struct wiphy *wiphy, u32 n_netinfo) {
+	struct cfg80211_scan_request *req;
+	size_t req_size;
+
+	req_size = sizeof(*req) +
+		   n_netinfo * sizeof(req->channels[0]) +
+		   n_netinfo * sizeof(*req->ssids);
+
+	req = kzalloc(req_size, GFP_KERNEL);
+	if (req) {
+		req->wiphy = wiphy;
+		req->ssids = (void *)(&req->channels[0]) +
+			     n_netinfo * sizeof(req->channels[0]);
+	}
+	return req;
+}
+
+static int brcmf_internal_escan_add_info(struct cfg80211_scan_request *req,
+					 u8 *ssid, u8 ssid_len, u8 channel)
+{
+	struct ieee80211_channel *chan;
+	enum nl80211_band band;
+	int freq;
+
+	if (channel <= CH_MAX_2G_CHANNEL)
+		band = NL80211_BAND_2GHZ;
+	else
+		band = NL80211_BAND_5GHZ;
+
+	freq = ieee80211_channel_to_frequency(channel, band);
+	if (!freq)
+		return -EINVAL;
+
+	chan = ieee80211_get_channel(req->wiphy, freq);
+	if (!chan)
+		return -EINVAL;
+
+	req->channels[req->n_channels++] = chan;
+	memcpy(req->ssids[req->n_ssids].ssid, ssid, ssid_len);
+	req->ssids[req->n_ssids++].ssid_len = ssid_len;
+
+	return 0;
+}
+
+static int brcmf_start_internal_escan(struct brcmf_if *ifp,
+				      struct cfg80211_scan_request *request)
+{
+	struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
+	int err;
+
+	if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+		/* Abort any on-going scan */
+		brcmf_abort_scanning(cfg);
+	}
+
+	set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+	cfg->escan_info.run = brcmf_run_escan;
+	err = brcmf_do_escan(ifp, request);
+	if (err) {
+		clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+		return err;
+	}
+	cfg->internal_escan = true;
+	return 0;
+}
+
 /* PFN result doesn't have all the info which are required by the supplicant
  * (For e.g IEs) Do a target Escan so that sched scan results are reported
  * via wl_inform_single_bss in the required format. Escan does require the
@@ -3203,12 +3270,8 @@ static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg)
 	struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
 	struct brcmf_pno_net_info_le *netinfo, *netinfo_start;
 	struct cfg80211_scan_request *request = NULL;
-	struct cfg80211_ssid *ssid = NULL;
-	struct ieee80211_channel *channel = NULL;
 	struct wiphy *wiphy = cfg_to_wiphy(cfg);
-	int err = 0;
-	int channel_req = 0;
-	int band = 0;
+	int i, err = 0;
 	struct brcmf_pno_scanresults_le *pfn_result;
 	u32 result_count;
 	u32 status;
@@ -3234,83 +3297,47 @@ static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg)
 	 */
 	WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE);
 	brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count);
-	if (result_count > 0) {
-		int i;
-
-		request = kzalloc(sizeof(*request), GFP_KERNEL);
-		ssid = kcalloc(result_count, sizeof(*ssid), GFP_KERNEL);
-		channel = kcalloc(result_count, sizeof(*channel), GFP_KERNEL);
-		if (!request || !ssid || !channel) {
-			err = -ENOMEM;
-			goto out_err;
-		}
-
-		request->wiphy = wiphy;
-		data += sizeof(struct brcmf_pno_scanresults_le);
-		netinfo_start = (struct brcmf_pno_net_info_le *)data;
-
-		for (i = 0; i < result_count; i++) {
-			netinfo = &netinfo_start[i];
-			if (!netinfo) {
-				brcmf_err("Invalid netinfo ptr. index: %d\n",
-					  i);
-				err = -EINVAL;
-				goto out_err;
-			}
-
-			brcmf_dbg(SCAN, "SSID:%s Channel:%d\n",
-				  netinfo->SSID, netinfo->channel);
-			memcpy(ssid[i].ssid, netinfo->SSID, netinfo->SSID_len);
-			ssid[i].ssid_len = netinfo->SSID_len;
-			request->n_ssids++;
-
-			channel_req = netinfo->channel;
-			if (channel_req <= CH_MAX_2G_CHANNEL)
-				band = NL80211_BAND_2GHZ;
-			else
-				band = NL80211_BAND_5GHZ;
-			channel[i].center_freq =
-				ieee80211_channel_to_frequency(channel_req,
-							       band);
-			channel[i].band = band;
-			channel[i].flags |= IEEE80211_CHAN_NO_HT40;
-			request->channels[i] = &channel[i];
-			request->n_channels++;
-		}
+	if (!result_count) {
+		brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
+		goto out_err;
+	}
+	request = brcmf_alloc_internal_escan_request(wiphy,
+						     result_count);
+	if (!request) {
+		err = -ENOMEM;
+		goto out_err;
+	}
 
-		/* assign parsed ssid array */
-		if (request->n_ssids)
-			request->ssids = &ssid[0];
+	data += sizeof(struct brcmf_pno_scanresults_le);
+	netinfo_start = (struct brcmf_pno_net_info_le *)data;
 
-		if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-			/* Abort any on-going scan */
-			brcmf_abort_scanning(cfg);
+	for (i = 0; i < result_count; i++) {
+		netinfo = &netinfo_start[i];
+		if (!netinfo) {
+			brcmf_err("Invalid netinfo ptr. index: %d\n",
+				  i);
+			err = -EINVAL;
+			goto out_err;
 		}
 
-		set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
-		cfg->escan_info.run = brcmf_run_escan;
-		err = brcmf_do_escan(ifp, request);
-		if (err) {
-			clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+		brcmf_dbg(SCAN, "SSID:%.32s Channel:%d\n",
+			  netinfo->SSID, netinfo->channel);
+		err = brcmf_internal_escan_add_info(request,
+						    netinfo->SSID,
+						    netinfo->SSID_len,
+						    netinfo->channel);
+		if (err)
 			goto out_err;
-		}
-		cfg->sched_escan = true;
-		cfg->scan_request = request;
-	} else {
-		brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
-		goto out_err;
 	}
 
-	kfree(ssid);
-	kfree(channel);
-	kfree(request);
-	return 0;
+	err = brcmf_start_internal_escan(ifp, request);
+	if (!err)
+		goto free_req;
 
 out_err:
-	kfree(ssid);
-	kfree(channel);
-	kfree(request);
 	cfg80211_sched_scan_stopped(wiphy);
+free_req:
+	kfree(request);
 	return err;
 }
 
@@ -3405,7 +3432,7 @@ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
 
 	brcmf_dbg(SCAN, "enter\n");
 	brcmf_pno_clean(ifp);
-	if (cfg->sched_escan)
+	if (cfg->internal_escan)
 		brcmf_notify_escan_complete(cfg, ifp, true, true);
 	return 0;
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
index 8889832..0c9a708 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -271,7 +271,7 @@ struct brcmf_cfg80211_wowl {
  * @pub: common driver information.
  * @channel: current channel.
  * @active_scan: current scan mode.
- * @sched_escan: e-scan for scheduled scan support running.
+ * @internal_escan: indicates internally initiated e-scan is running.
  * @ibss_starter: indicates this sta is ibss starter.
  * @pwr_save: indicate whether dongle to support power save mode.
  * @dongle_up: indicate whether dongle up or not.
@@ -303,7 +303,7 @@ struct brcmf_cfg80211_info {
 	struct brcmf_pub *pub;
 	u32 channel;
 	bool active_scan;
-	bool sched_escan;
+	bool internal_escan;
 	bool ibss_starter;
 	bool pwr_save;
 	bool dongle_up;
-- 
1.9.1