From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC v4 21/21] ath10k: dma fixes for high latency devices
Date: Tue, 21 Feb 2017 17:15:41 +0100 [thread overview]
Message-ID: <1487693741-10042-22-git-send-email-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <1487693741-10042-1-git-send-email-erik.stromdahl@gmail.com>
Several DMA related functions (such as the dma_map_xxx functions)
are not used with high latency devices and don't need to be invoked
in this case.
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
drivers/net/wireless/ath/ath10k/htc.c | 13 ++++++++-----
drivers/net/wireless/ath/ath10k/htt_rx.c | 3 ++-
drivers/net/wireless/ath/ath10k/htt_tx.c | 3 +++
drivers/net/wireless/ath/ath10k/txrx.c | 5 +++--
4 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 3eaa9a8..b5fddd7 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -134,11 +134,14 @@ int ath10k_htc_send(struct ath10k_htc *htc,
ath10k_htc_prepare_tx_skb(ep, skb);
skb_cb->eid = eid;
- skb_cb->paddr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
- ret = dma_mapping_error(dev, skb_cb->paddr);
- if (ret) {
- ret = -EIO;
- goto err_credits;
+ if (!ar->is_high_latency) {
+ skb_cb->paddr = dma_map_single(dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ ret = dma_mapping_error(dev, skb_cb->paddr);
+ if (ret) {
+ ret = -EIO;
+ goto err_credits;
+ }
}
sg_item.transfer_id = ep->eid;
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index c90570f..96e73b4 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2485,7 +2485,8 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
break;
}
case HTT_T2H_MSG_TYPE_TX_COMPL_IND:
- ath10k_htt_rx_tx_compl_ind(htt->ar, skb);
+ if (!ar->is_high_latency)
+ ath10k_htt_rx_tx_compl_ind(htt->ar, skb);
break;
case HTT_T2H_MSG_TYPE_SEC_IND: {
struct ath10k *ar = htt->ar;
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a714aa8..190d002 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -409,6 +409,9 @@ int ath10k_htt_tx_start(struct ath10k_htt *htt)
if (htt->tx_mem_allocated)
return 0;
+ if (ar->is_high_latency)
+ return 0;
+
ret = ath10k_htt_tx_alloc_buf(htt);
if (ret)
goto free_idr_pending_tx;
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 9852c5d..5e27f6da 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -89,11 +89,12 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
ath10k_htt_tx_dec_pending(htt);
- if (htt->num_pending_tx == 0)
+ if (!ar->is_high_latency && (htt->num_pending_tx == 0))
wake_up(&htt->empty_tx_wq);
spin_unlock_bh(&htt->tx_lock);
- dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
+ if (!ar->is_high_latency)
+ dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
ath10k_report_offchan_tx(htt->ar, msdu);
--
2.7.4
prev parent reply other threads:[~2017-02-21 16:16 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-21 16:15 [RFC v4 00/21] ath10k sdio and usb support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 01/21] ath10k: htc: made static function public Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 02/21] ath10k: htc: rx trailer lookahead support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 03/21] ath10k: htc: move htc ctrl ep connect to htc_init Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 04/21] ath10k: htc: refactorization Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 05/21] ath10k: various sdio related definitions Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 06/21] ath10k: sdio support Erik Stromdahl
2017-03-10 12:11 ` Valo, Kalle
2017-03-10 12:43 ` Valo, Kalle
2017-03-10 16:29 ` Erik Stromdahl
2017-03-11 10:36 ` Erik Stromdahl
2017-03-11 15:04 ` Kalle Valo
2017-03-11 19:10 ` Erik Stromdahl
2017-03-15 12:09 ` Kalle Valo
2017-03-15 18:01 ` Erik Stromdahl
2017-03-16 9:33 ` Kalle Valo
2017-03-17 15:54 ` Erik Stromdahl
2017-03-23 16:10 ` Kalle Valo
2017-02-21 16:15 ` [RFC v4 07/21] ath10k: add sdio extra initializations Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 08/21] ath10k: sdio get target info Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 09/21] ath10k: htc: ready_ext msg support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 10/21] ath10k: various usb related definitions Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 11/21] ath10k: usb support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 12/21] ath10k: high_latency detection Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 13/21] ath10k: different fw file names for usb and sdio Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 14/21] ath10k: htt: RX ring config HL support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 15/21] ath10k: per target configurablity of various items Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 16/21] ath10k: add start_once support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 17/21] ath10k: htt: High latency TX support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 18/21] ath10k: htt: High latency RX support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 19/21] ath10k: add QCA9377 usb hw_param item Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 20/21] ath10k: add QCA9377 sdio " Erik Stromdahl
2017-02-21 16:15 ` Erik Stromdahl [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487693741-10042-22-git-send-email-erik.stromdahl@gmail.com \
--to=erik.stromdahl@gmail.com \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).