From: Alban <albeu@free.fr>
To: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: John Crispin <john@phrozen.org>, Alban <albeu@free.fr>,
Kalle Valo <kvalo@codeaurora.org>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/7] ath9k: ahb: Add OF support
Date: Mon, 13 Mar 2017 22:05:10 +0100 [thread overview]
Message-ID: <1489439116-4233-2-git-send-email-albeu@free.fr> (raw)
In-Reply-To: <1489439116-4233-1-git-send-email-albeu@free.fr>
Allow registering ath9k AHB devices defined in DT. This just add the
compatible strings to allow matching the driver and setting the proper
device ID.
Signed-off-by: Alban <albeu@free.fr>
---
drivers/net/wireless/ath/ath9k/ahb.c | 47 +++++++++++++++++++++++++++++++++---
1 file changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 2bd982c..36a2645 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -18,6 +18,7 @@
#include <linux/nl80211.h>
#include <linux/platform_device.h>
+#include <linux/of_device.h>
#include <linux/module.h>
#include "ath9k.h"
@@ -49,6 +50,33 @@ static const struct platform_device_id ath9k_platform_id_table[] = {
{},
};
+#ifdef CONFIG_OF
+static const struct of_device_id ath_ahb_of_match[] = {
+ {
+ .compatible = "qca,ar9100-wmac",
+ .data = (void *)AR5416_AR9100_DEVID
+ },
+ {
+ .compatible = "qca,ar9330-wmac",
+ .data = (void *)AR9300_DEVID_AR9330
+ },
+ {
+ .compatible = "qca,ar9340-wmac",
+ .data = (void *)AR9300_DEVID_AR9340
+ },
+ {
+ .compatible = "qca,qca9550-wmac",
+ .data = (void *)AR9300_DEVID_QCA955X
+ },
+ {
+ .compatible = "qca,qca9530-wmac",
+ .data = (void *)AR9300_DEVID_AR953X
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ath_ahb_of_match);
+#endif
+
/* return bus cachesize in 4B word units */
static void ath_ahb_read_cachesize(struct ath_common *common, int *csz)
{
@@ -79,10 +107,20 @@ static int ath_ahb_probe(struct platform_device *pdev)
int ret = 0;
struct ath_hw *ah;
char hw_name[64];
+ u16 devid;
- if (!dev_get_platdata(&pdev->dev)) {
- dev_err(&pdev->dev, "no platform data specified\n");
- return -EINVAL;
+ if (id) {
+ devid = id->driver_data;
+ } else {
+ const struct of_device_id *match;
+
+ match = of_match_device(ath_ahb_of_match, &pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "no device match found\n");
+ return -EINVAL;
+ }
+
+ devid = (u16)(unsigned long)match->data;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -127,7 +165,7 @@ static int ath_ahb_probe(struct platform_device *pdev)
goto err_free_hw;
}
- ret = ath9k_init_device(id->driver_data, sc, &ath_ahb_bus_ops);
+ ret = ath9k_init_device(devid, sc, &ath_ahb_bus_ops);
if (ret) {
dev_err(&pdev->dev, "failed to initialize device\n");
goto err_irq;
@@ -167,6 +205,7 @@ static struct platform_driver ath_ahb_driver = {
.remove = ath_ahb_remove,
.driver = {
.name = "ath9k",
+ .of_match_table = of_match_ptr(ath_ahb_of_match),
},
.id_table = ath9k_platform_id_table,
};
--
2.7.4
next prev parent reply other threads:[~2017-03-13 21:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-13 21:05 [PATCH 1/7] Documentation: dt: net: Update the ath9k binding for SoC devices Alban
2017-03-13 21:05 ` Alban [this message]
2017-03-14 11:17 ` [PATCH 2/7] ath9k: ahb: Add OF support Sergei Shtylyov
2017-03-13 21:05 ` [PATCH 3/7] ath9k: Add support for reading the EEPROM data using the nvmem API Alban
2017-03-13 22:17 ` Rafał Miłecki
2017-03-13 23:53 ` Christian Lamparter
2017-03-23 14:43 ` Alban
2017-03-24 16:24 ` Christian Lamparter
2017-03-13 21:05 ` [PATCH 4/7] ath9k: Add support for reading the MAC address with nvmem Alban
2017-03-13 21:05 ` [PATCH 5/7] ath9k: of: Use the clk API to get the reference clock rate Alban
2017-03-13 22:17 ` Rafał Miłecki
2017-03-13 21:05 ` [PATCH 6/7] ath9k: Allow using the reset API for the external reset Alban
2017-03-13 21:05 ` [PATCH 7/7] ath9k: hw: Reset the device with the external reset before init Alban
2017-03-20 22:06 ` [PATCH 1/7] Documentation: dt: net: Update the ath9k binding for SoC devices Rob Herring
2017-03-27 16:11 ` Christian Lamparter
2017-03-28 8:44 ` Alban
2017-03-28 14:53 ` Christian Lamparter
2017-03-28 15:18 ` Andrew Lunn
2017-03-28 16:21 ` Christian Lamparter
2017-03-28 16:41 ` Andrew Lunn
2017-03-28 17:09 ` Christian Lamparter
2017-04-05 10:09 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489439116-4233-2-git-send-email-albeu@free.fr \
--to=albeu@free.fr \
--cc=ath9k-devel@qca.qualcomm.com \
--cc=john@phrozen.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).