From: Aditya Shankar <aditya.shankar@microchip.com>
To: <arend.vanspriel@broadcom.com>, <gregkh@linuxfoundation.org>,
<linux-wireless@vger.kernel.org>
Cc: <ganesh.krishna@microchip.com>, <devel@driverdev.osuosl.org>,
Aditya Shankar <aditya.shankar@microchip.com>
Subject: [PATCH v3] staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler
Date: Tue, 11 Apr 2017 22:11:43 +0530 [thread overview]
Message-ID: <1491928903-2866-1-git-send-email-aditya.shankar@microchip.com> (raw)
Change the config packet format used in handle_set_wfi_drv_handler()
to align the host driver with the new format used in the wilc firmware.
The change updates the format in which the host driver provides the
firmware with the drv_handler index and also uses two new
fields viz. "mode" and 'name" in the config packet along with this index
to directly provide details about the interface and its mode to the
firmware instead of having multiple if-else statements in the host driver
to decide which interface to configure.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
---
Change in v2: Fix build warning
Change in v3: Address review comments from v2
---
drivers/staging/wilc1000/host_interface.c | 48 ++++++++++++++++++-----
drivers/staging/wilc1000/host_interface.h | 9 ++++-
drivers/staging/wilc1000/linux_wlan.c | 37 +++++------------
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 2 +-
drivers/staging/wilc1000/wilc_wfi_netdevice.h | 1 +
drivers/staging/wilc1000/wilc_wlan_if.h | 2 +-
6 files changed, 59 insertions(+), 40 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
index c3a8af0..7352488 100644
--- a/drivers/staging/wilc1000/host_interface.c
+++ b/drivers/staging/wilc1000/host_interface.c
@@ -334,14 +334,39 @@ static void handle_set_wfi_drv_handler(struct wilc_vif *vif,
{
int ret = 0;
struct wid wid;
+ u8 *currbyte, *buffer;
+ struct host_if_drv *hif_drv = NULL;
+
+ if (!vif->hif_drv)
+ return;
+
+ if (!hif_drv_handler)
+ return;
+
+ hif_drv = vif->hif_drv;
+ buffer = kzalloc(DRV_HANDLER_SIZE, GFP_ATOMIC);
+
+ if (!buffer)
+ return;
+
+ currbyte = buffer;
+ *currbyte = hif_drv->driver_handler_id & DRV_HANDLER_MASK;
+ currbyte++;
+ *currbyte = (u32)0 & DRV_HANDLER_MASK;
+ currbyte++;
+ *currbyte = (u32)0 & DRV_HANDLER_MASK;
+ currbyte++;
+ *currbyte = (u32)0 & DRV_HANDLER_MASK;
+ currbyte++;
+ *currbyte = (hif_drv_handler->name | (hif_drv_handler->mode << 1));
wid.id = (u16)WID_SET_DRV_HANDLER;
wid.type = WID_STR;
- wid.val = (s8 *)hif_drv_handler;
- wid.size = sizeof(*hif_drv_handler);
+ wid.val = (s8 *)buffer;
+ wid.size = DRV_HANDLER_SIZE;
ret = wilc_send_config_pkt(vif, SET_CFG, &wid, 1,
- hif_drv_handler->handler);
+ hif_drv->driver_handler_id);
if (!hif_drv_handler->handler)
complete(&hif_driver_comp);
@@ -2403,9 +2428,9 @@ static void Handle_SetMulticastFilter(struct wilc_vif *vif,
pu8CurrByte = wid.val;
*pu8CurrByte++ = (strHostIfSetMulti->enabled & 0xFF);
- *pu8CurrByte++ = 0;
- *pu8CurrByte++ = 0;
- *pu8CurrByte++ = 0;
+ *pu8CurrByte++ = ((strHostIfSetMulti->enabled >> 8) & 0xFF);
+ *pu8CurrByte++ = ((strHostIfSetMulti->enabled >> 16) & 0xFF);
+ *pu8CurrByte++ = ((strHostIfSetMulti->enabled >> 24) & 0xFF);
*pu8CurrByte++ = (strHostIfSetMulti->cnt & 0xFF);
*pu8CurrByte++ = ((strHostIfSetMulti->cnt >> 8) & 0xFF);
@@ -3099,7 +3124,8 @@ int wilc_set_mac_chnl_num(struct wilc_vif *vif, u8 channel)
return 0;
}
-int wilc_set_wfi_drv_handler(struct wilc_vif *vif, int index, u8 mac_idx)
+int wilc_set_wfi_drv_handler(struct wilc_vif *vif, int index, u8 mode,
+ u8 ifc_id)
{
int result = 0;
struct host_if_msg msg;
@@ -3107,7 +3133,8 @@ int wilc_set_wfi_drv_handler(struct wilc_vif *vif, int index, u8 mac_idx)
memset(&msg, 0, sizeof(struct host_if_msg));
msg.id = HOST_IF_MSG_SET_WFIDRV_HANDLER;
msg.body.drv.handler = index;
- msg.body.drv.mac_idx = mac_idx;
+ msg.body.drv.mode = mode;
+ msg.body.drv.name = ifc_id;
msg.vif = vif;
result = wilc_enqueue_cmd(&msg);
@@ -3330,6 +3357,7 @@ int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler)
for (i = 0; i < wilc->vif_num; i++)
if (dev == wilc->vif[i]->ndev) {
wilc->vif[i]->hif_drv = hif_drv;
+ hif_drv->driver_handler_id = i + 1;
break;
}
@@ -3403,7 +3431,7 @@ int wilc_deinit(struct wilc_vif *vif)
del_timer_sync(&periodic_rssi);
del_timer_sync(&hif_drv->remain_on_ch_timer);
- wilc_set_wfi_drv_handler(vif, 0, 0);
+ wilc_set_wfi_drv_handler(vif, 0, 0, 0);
wait_for_completion(&hif_driver_comp);
if (hif_drv->usr_scan_req.scan_result) {
@@ -3449,8 +3477,10 @@ void wilc_network_info_received(struct wilc *wilc, u8 *buffer, u32 length)
id = ((buffer[length - 4]) | (buffer[length - 3] << 8) | (buffer[length - 2] << 16) | (buffer[length - 1] << 24));
vif = wilc_get_vif_from_idx(wilc, id);
+
if (!vif)
return;
+
hif_drv = vif->hif_drv;
if (!hif_drv || hif_drv == terminated_handle) {
diff --git a/drivers/staging/wilc1000/host_interface.h b/drivers/staging/wilc1000/host_interface.h
index f36d3b5..8c44c9b 100644
--- a/drivers/staging/wilc1000/host_interface.h
+++ b/drivers/staging/wilc1000/host_interface.h
@@ -51,6 +51,8 @@
#define WILC_ADD_STA_LENGTH 40
#define SCAN_EVENT_DONE_ABORTED
#define NUM_CONCURRENT_IFC 2
+#define DRV_HANDLER_SIZE 5
+#define DRV_HANDLER_MASK 0x000000FF
struct rf_info {
u8 link_speed;
@@ -217,7 +219,8 @@ struct user_conn_req {
struct drv_handler {
u32 handler;
- u8 mac_idx;
+ u8 mode;
+ u8 name;
};
struct op_mode {
@@ -281,6 +284,7 @@ struct host_if_drv {
struct timer_list remain_on_ch_timer;
bool IFC_UP;
+ int driver_handler_id;
};
struct add_sta_param {
@@ -354,7 +358,8 @@ int wilc_remain_on_channel(struct wilc_vif *vif, u32 session_id,
void *user_arg);
int wilc_listen_state_expired(struct wilc_vif *vif, u32 session_id);
int wilc_frame_register(struct wilc_vif *vif, u16 frame_type, bool reg);
-int wilc_set_wfi_drv_handler(struct wilc_vif *vif, int index, u8 mac_idx);
+int wilc_set_wfi_drv_handler(struct wilc_vif *vif, int index, u8 mode,
+ u8 ifc_id);
int wilc_set_operation_mode(struct wilc_vif *vif, u32 mode);
int wilc_get_statistics(struct wilc_vif *vif, struct rf_info *stats);
void wilc_resolve_disconnect_aberration(struct wilc_vif *vif);
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index d6d8034..3087084 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -858,34 +858,15 @@ static int wilc_mac_open(struct net_device *ndev)
for (i = 0; i < wl->vif_num; i++) {
if (ndev == wl->vif[i]->ndev) {
- if (vif->iftype == AP_MODE) {
- wilc_set_wfi_drv_handler(vif,
- wilc_get_vif_idx(vif),
- 0);
- } else if (!wilc_wlan_get_num_conn_ifcs(wl)) {
- wilc_set_wfi_drv_handler(vif,
- wilc_get_vif_idx(vif),
- wl->open_ifcs);
- } else {
- if (memcmp(wl->vif[i ^ 1]->bssid,
- wl->vif[i ^ 1]->src_addr, 6))
- wilc_set_wfi_drv_handler(vif,
- wilc_get_vif_idx(vif),
- 0);
- else
- wilc_set_wfi_drv_handler(vif,
- wilc_get_vif_idx(vif),
- 1);
- }
+ wilc_set_wfi_drv_handler(vif, wilc_get_vif_idx(vif),
+ vif->iftype, vif->ifc_id);
wilc_set_operation_mode(vif, vif->iftype);
-
- wilc_get_mac_address(vif, mac_add);
- netdev_dbg(ndev, "Mac address: %pM\n", mac_add);
- memcpy(wl->vif[i]->src_addr, mac_add, ETH_ALEN);
-
break;
}
}
+ wilc_get_mac_address(vif, mac_add);
+ netdev_dbg(ndev, "Mac address: %pM\n", mac_add);
+ memcpy(wl->vif[i]->src_addr, mac_add, ETH_ALEN);
memcpy(ndev->dev_addr, wl->vif[i]->src_addr, ETH_ALEN);
@@ -1246,11 +1227,13 @@ int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type,
vif = netdev_priv(ndev);
memset(vif, 0, sizeof(struct wilc_vif));
- if (i == 0)
+ if (i == 0) {
strcpy(ndev->name, "wlan%d");
- else
+ vif->ifc_id = 1;
+ } else {
strcpy(ndev->name, "p2p%d");
-
+ vif->ifc_id = 0;
+ }
vif->wilc = *wilc;
vif->ndev = ndev;
wl->vif[i] = vif;
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index b02a83b..fa32e7e 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -1887,7 +1887,7 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev,
if (wl->initialized) {
wilc_set_wfi_drv_handler(vif, wilc_get_vif_idx(vif),
- 0);
+ 0, vif->ifc_id);
wilc_set_operation_mode(vif, AP_MODE);
wilc_set_power_mgmt(vif, 0, 0);
}
diff --git a/drivers/staging/wilc1000/wilc_wfi_netdevice.h b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
index d431673..c89bf43 100644
--- a/drivers/staging/wilc1000/wilc_wfi_netdevice.h
+++ b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
@@ -158,6 +158,7 @@ struct wilc_vif {
struct host_if_drv *hif_drv;
struct net_device *ndev;
u8 mode;
+ u8 ifc_id;
};
struct wilc {
diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
index 439ac6f..f4d6005 100644
--- a/drivers/staging/wilc1000/wilc_wlan_if.h
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -845,7 +845,7 @@ typedef enum {
WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
- WID_SET_DRV_HANDLER = 0x3030,
+ WID_SET_DRV_HANDLER = 0x3079,
/* NMAC String WID list */
WID_11N_P_ACTION_REQ = 0x3080,
--
2.7.4
next reply other threads:[~2017-04-11 16:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-11 16:41 Aditya Shankar [this message]
2017-04-11 17:35 ` [PATCH v3] staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler Greg KH
2017-04-13 2:44 ` Aditya Shankar
2017-04-18 11:51 ` Greg KH
2017-04-18 11:50 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491928903-2866-1-git-send-email-aditya.shankar@microchip.com \
--to=aditya.shankar@microchip.com \
--cc=arend.vanspriel@broadcom.com \
--cc=devel@driverdev.osuosl.org \
--cc=ganesh.krishna@microchip.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).