From: Amitkumar Karwar <amitkarwar@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org,
Amitkumar Karwar <amit.karwar@redpinesignals.com>,
Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Subject: [v2 00/17] rsi: station enhancements
Date: Mon, 10 Jul 2017 18:10:31 +0530 [thread overview]
Message-ID: <1499690448-9956-1-git-send-email-amitkarwar@gmail.com> (raw)
From: Amitkumar Karwar <amit.karwar@redpinesignals.com>
We have internal management frames(commands) sent to firmware for
various configurations. This patch defines some common structures
which can be shared by those frames. Key handling and regulatory
enhancements are also includesd. With this patch series included,
station can connect to security enabled AP and send/receive data.
Changes in v2:
v1 patch series is rebased to latest code. v1 fails to apply, as
below patch is merged recently.
b952f4dff27 ("net: manual clean code which call skb_put_[data:zero]")
Prameela Rani Garnepudi (17):
rsi: add common structures needed for command packets
rsi: immediate wakeup bit and priority for TX command packets
rsi: Update in tx command frame radio capabilities
rsi: remove unnecessary check for 802.11 management packet
rsi: Update peer notify command frame
rsi: Update aggregation parameters command frame
rsi: Update baseband RF programming frame
rsi: update set_channel command frame
rsi: update vap capabilities command frame
rsi: update set_key command frame
rsi: set_key enhancements
rsi: update autorate request command frame
rsi: block/unblock data queues as per connection status
rsi: update tx command frame block/unblock data
rsi: Remove internal header from Tx status skb
rsi: Send rx filter frame to device when interface is down
rsi: regulatory enhancements
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 63 ++++-
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 380 ++++++++++++++--------------
drivers/net/wireless/rsi/rsi_main.h | 18 +-
drivers/net/wireless/rsi/rsi_mgmt.h | 143 ++++++++++-
4 files changed, 399 insertions(+), 205 deletions(-)
--
2.7.4
next reply other threads:[~2017-07-10 12:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-10 12:40 Amitkumar Karwar [this message]
2017-07-10 12:40 ` [v2 01/17] rsi: add common structures needed for command packets Amitkumar Karwar
2017-07-28 14:27 ` [v2,01/17] " Kalle Valo
2017-07-10 12:40 ` [v2 02/17] rsi: immediate wakeup bit and priority for TX " Amitkumar Karwar
2017-07-10 12:40 ` [v2 03/17] rsi: Update in tx command frame radio capabilities Amitkumar Karwar
2017-07-10 12:40 ` [v2 04/17] rsi: remove unnecessary check for 802.11 management packet Amitkumar Karwar
2017-07-10 12:40 ` [v2 05/17] rsi: Update peer notify command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 06/17] rsi: Update aggregation parameters " Amitkumar Karwar
2017-07-10 12:40 ` [v2 07/17] rsi: Update baseband RF programming frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 08/17] rsi: update set_channel command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 09/17] rsi: update vap capabilities " Amitkumar Karwar
2017-07-10 12:40 ` [v2 10/17] rsi: update set_key " Amitkumar Karwar
2017-07-10 12:40 ` [v2 11/17] rsi: set_key enhancements Amitkumar Karwar
2017-07-10 12:40 ` [v2 12/17] rsi: update autorate request command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 13/17] rsi: block/unblock data queues as per connection status Amitkumar Karwar
2017-07-10 12:40 ` [v2 14/17] rsi: update tx command frame block/unblock data Amitkumar Karwar
2017-07-10 12:40 ` [v2 15/17] rsi: Remove internal header from Tx status skb Amitkumar Karwar
2017-07-10 12:40 ` [v2 16/17] rsi: Send rx filter frame to device when interface is down Amitkumar Karwar
2017-07-10 12:40 ` [v2 17/17] rsi: regulatory enhancements Amitkumar Karwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499690448-9956-1-git-send-email-amitkarwar@gmail.com \
--to=amitkarwar@gmail.com \
--cc=amit.karwar@redpinesignals.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=prameela.j04cs@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).