From: Wright Feng <wright.feng@cypress.com>
To: arend.vanspriel@broadcom.com, franky.lin@broadcom.com,
hante.meuleman@broadcom.com, kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org,
brcm80211-dev-list.pdl@broadcom.com, wright.feng@cypress.com,
Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Subject: [PATCH v2 2/3] brcmfmac: Add support for CYW4373 SDIO/USB chipset
Date: Thu, 3 Aug 2017 17:37:58 +0800 [thread overview]
Message-ID: <1501753079-1758-2-git-send-email-wright.feng@cypress.com> (raw)
In-Reply-To: <1501753079-1758-1-git-send-email-wright.feng@cypress.com>
From: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Add support for CYW4373 SDIO/USB chipset.
CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support.
It's a WiFi/BT combo device.
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
v2: add new chip(4737) info in commit message
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 +
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 2 ++
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 +++-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 9 ++++++++-
drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 3 +++
include/linux/mmc/sdio_ids.h | 1 +
6 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 9b970dc..ea47f75 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -1108,6 +1108,7 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43455),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4356),
+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_4373),
{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index 05f22ff..c5d1a1c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -690,6 +690,8 @@ static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci)
case BRCM_CC_4365_CHIP_ID:
case BRCM_CC_4366_CHIP_ID:
return 0x200000;
+ case CY_CC_4373_CHIP_ID:
+ return 0x160000;
default:
brcmf_err("unknown chip: %s\n", ci->pub.name);
break;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 5653d6d..b1789b1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -616,6 +616,7 @@ struct sdiod_drive_str {
BRCMF_FW_NVRAM_DEF(43455, "brcmfmac43455-sdio.bin", "brcmfmac43455-sdio.txt");
BRCMF_FW_NVRAM_DEF(4354, "brcmfmac4354-sdio.bin", "brcmfmac4354-sdio.txt");
BRCMF_FW_NVRAM_DEF(4356, "brcmfmac4356-sdio.bin", "brcmfmac4356-sdio.txt");
+BRCMF_FW_NVRAM_DEF(4373, "brcmfmac4373-sdio.bin", "brcmfmac4373-sdio.txt");
static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
@@ -633,7 +634,8 @@ struct sdiod_drive_str {
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, 43430),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354),
- BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356)
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356),
+ BRCMF_FW_NVRAM_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373)
};
static void pkt_align(struct sk_buff *p, int len, int align)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 0eea48e..8f20a4b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -50,6 +50,7 @@
BRCMF_FW_DEF(43236B, "brcmfmac43236b.bin");
BRCMF_FW_DEF(43242A, "brcmfmac43242a.bin");
BRCMF_FW_DEF(43569, "brcmfmac43569.bin");
+BRCMF_FW_DEF(4373, "brcmfmac4373.bin");
static struct brcmf_firmware_mapping brcmf_usb_fwnames[] = {
BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
@@ -58,7 +59,8 @@
BRCMF_FW_ENTRY(BRCM_CC_43238_CHIP_ID, 0x00000008, 43236B),
BRCMF_FW_ENTRY(BRCM_CC_43242_CHIP_ID, 0xFFFFFFFF, 43242A),
BRCMF_FW_ENTRY(BRCM_CC_43566_CHIP_ID, 0xFFFFFFFF, 43569),
- BRCMF_FW_ENTRY(BRCM_CC_43569_CHIP_ID, 0xFFFFFFFF, 43569)
+ BRCMF_FW_ENTRY(BRCM_CC_43569_CHIP_ID, 0xFFFFFFFF, 43569),
+ BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373)
};
#define TRX_MAGIC 0x30524448 /* "HDR0" */
@@ -1463,15 +1465,20 @@ static int brcmf_usb_reset_resume(struct usb_interface *intf)
#define LINKSYS_USB_DEVICE(dev_id) \
{ USB_DEVICE(BRCM_USB_VENDOR_ID_LINKSYS, dev_id) }
+#define CYPRESS_USB_DEVICE(dev_id) \
+ { USB_DEVICE(CY_USB_VENDOR_ID_CYPRESS, dev_id) }
+
static struct usb_device_id brcmf_usb_devid_table[] = {
BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),
BRCMF_USB_DEVICE(BRCM_USB_43236_DEVICE_ID),
BRCMF_USB_DEVICE(BRCM_USB_43242_DEVICE_ID),
BRCMF_USB_DEVICE(BRCM_USB_43569_DEVICE_ID),
LINKSYS_USB_DEVICE(BRCM_USB_43235_LINKSYS_DEVICE_ID),
+ CYPRESS_USB_DEVICE(CY_USB_4373_DEVICE_ID),
{ USB_DEVICE(BRCM_USB_VENDOR_ID_LG, BRCM_USB_43242_LG_DEVICE_ID) },
/* special entry for device with firmware loaded and running */
BRCMF_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
+ CYPRESS_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
{ /* end: all zeroes */ }
};
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
index f1fb8a3..57544a3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
@@ -23,6 +23,7 @@
#define BRCM_USB_VENDOR_ID_BROADCOM 0x0a5c
#define BRCM_USB_VENDOR_ID_LG 0x043e
#define BRCM_USB_VENDOR_ID_LINKSYS 0x13b1
+#define CY_USB_VENDOR_ID_CYPRESS 0x04b4
#define BRCM_PCIE_VENDOR_ID_BROADCOM PCI_VENDOR_ID_BROADCOM
/* Chipcommon Core Chip IDs */
@@ -57,6 +58,7 @@
#define BRCM_CC_4365_CHIP_ID 0x4365
#define BRCM_CC_4366_CHIP_ID 0x4366
#define BRCM_CC_4371_CHIP_ID 0x4371
+#define CY_CC_4373_CHIP_ID 0x4373
/* USB Device IDs */
#define BRCM_USB_43143_DEVICE_ID 0xbd1e
@@ -66,6 +68,7 @@
#define BRCM_USB_43242_LG_DEVICE_ID 0x3101
#define BRCM_USB_43569_DEVICE_ID 0xbd27
#define BRCM_USB_BCMFW_DEVICE_ID 0x0bdc
+#define CY_USB_4373_DEVICE_ID 0xbd29
/* PCIE Device IDs */
#define BRCM_PCIE_4350_DEVICE_ID 0x43a3
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index b733eb4..abacd54 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -39,6 +39,7 @@
#define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
#define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
#define SDIO_DEVICE_ID_BROADCOM_4356 0x4356
+#define SDIO_DEVICE_ID_CYPRESS_4373 0x4373
#define SDIO_VENDOR_ID_INTEL 0x0089
#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
--
1.9.1
next prev parent reply other threads:[~2017-08-03 9:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-03 9:37 [PATCH v2 1/3] brcmfmac: set wpa_auth to WPA_AUTH_DISABLED in AP/OPEN security mode Wright Feng
2017-08-03 9:37 ` Wright Feng [this message]
2017-08-07 12:27 ` [PATCH v2 2/3] brcmfmac: Add support for CYW4373 SDIO/USB chipset Arend van Spriel
2017-08-08 6:53 ` Chi-Hsien Lin
2017-08-08 9:36 ` Arend van Spriel
2017-08-03 9:37 ` [PATCH v2 3/3] brcmfmac: fix wrong num_different_channels when mchan feature enabled Wright Feng
2017-08-03 10:05 ` Kalle Valo
2017-08-07 12:33 ` Arend van Spriel
2017-08-03 10:04 ` [PATCH v2 1/3] brcmfmac: set wpa_auth to WPA_AUTH_DISABLED in AP/OPEN security mode Kalle Valo
2017-08-07 12:24 ` Arend van Spriel
2017-08-08 11:51 ` [v2, " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501753079-1758-2-git-send-email-wright.feng@cypress.com \
--to=wright.feng@cypress.com \
--cc=arend.vanspriel@broadcom.com \
--cc=brcm80211-dev-list.pdl@broadcom.com \
--cc=chi-hsien.lin@cypress.com \
--cc=franky.lin@broadcom.com \
--cc=hante.meuleman@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).