From: Xinming Hu <huxinming820@gmail.com>
To: Linux Wireless <linux-wireless@vger.kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>,
Brian Norris <briannorris@google.com>,
Dmitry Torokhov <dtor@google.com>,
rajatja@google.com, Zhiyuan Yang <yangzy@marvell.com>,
Tim Song <songtao@marvell.com>, Cathy Luo <cluo@marvell.com>,
Ganapathi Bhat <gbhat@marvell.com>, Xinming Hu <huxm@marvell.com>
Subject: [v2 PATCH] mwifiex: p2p: use separate device address
Date: Mon, 7 Aug 2017 01:36:06 +0000 [thread overview]
Message-ID: <1502069766-25841-1-git-send-email-huxinming820@gmail.com> (raw)
From: Xinming Hu <huxm@marvell.com>
Per below statement about p2p device address in WFA P2P
spec $2.4.3:
The P2P Device Address of a P2P Device shall be its globally
administered MAC address, or its globally administered MAC
address with the locally administered bit set.
This patch follow above statement, using a separate device
address for p2p interface
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
v2: Use BIT_ULL to fix kbuild test robot reported issue
---
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 5 +++-
drivers/net/wireless/marvell/mwifiex/main.c | 40 ++++++++++++++++---------
drivers/net/wireless/marvell/mwifiex/main.h | 4 +++
3 files changed, 34 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index d8ff823..c4382d0 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -927,6 +927,8 @@ static int mwifiex_deinit_priv_params(struct mwifiex_private *priv)
adapter->rx_locked = false;
spin_unlock_irqrestore(&adapter->rx_proc_lock, flags);
+ mwifiex_set_mac_address(priv, dev);
+
return 0;
}
@@ -2967,6 +2969,8 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
}
mwifiex_init_priv_params(priv, dev);
+ mwifiex_set_mac_address(priv, dev);
+
priv->netdev = dev;
ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
@@ -2994,7 +2998,6 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
dev_net_set(dev, wiphy_net(wiphy));
dev->ieee80211_ptr = &priv->wdev;
dev->ieee80211_ptr->iftype = priv->bss_mode;
- memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(dev, wiphy_dev(wiphy));
dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
index f2600b8..c6cc068 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -935,31 +935,44 @@ struct sk_buff *
return 0;
}
-/*
- * CFG802.11 network device handler for setting MAC address.
- */
-static int
-mwifiex_set_mac_address(struct net_device *dev, void *addr)
+int mwifiex_set_mac_address(struct mwifiex_private *priv,
+ struct net_device *dev)
{
- struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
- struct sockaddr *hw_addr = addr;
int ret;
+ u64 mac_addr;
- memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN);
+ if (priv->bss_type != MWIFIEX_BSS_TYPE_P2P)
+ goto done;
+
+ mac_addr = ether_addr_to_u64(priv->curr_addr);
+ mac_addr |= BIT_ULL(MWIFIEX_MAC_LOCAL_ADMIN_BIT);
+ u64_to_ether_addr(mac_addr, priv->curr_addr);
/* Send request to firmware */
ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS,
HostCmd_ACT_GEN_SET, 0, NULL, true);
- if (!ret)
- memcpy(priv->netdev->dev_addr, priv->curr_addr, ETH_ALEN);
- else
+ if (ret) {
mwifiex_dbg(priv->adapter, ERROR,
"set mac address failed: ret=%d\n", ret);
+ return ret;
+ }
+done:
memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN);
+ return 0;
+}
- return ret;
+/* CFG802.11 network device handler for setting MAC address.
+ */
+static int
+mwifiex_ndo_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+ struct sockaddr *hw_addr = addr;
+
+ memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN);
+ return mwifiex_set_mac_address(priv, dev);
}
/*
@@ -1252,7 +1265,7 @@ static struct net_device_stats *mwifiex_get_stats(struct net_device *dev)
.ndo_open = mwifiex_open,
.ndo_stop = mwifiex_close,
.ndo_start_xmit = mwifiex_hard_start_xmit,
- .ndo_set_mac_address = mwifiex_set_mac_address,
+ .ndo_set_mac_address = mwifiex_ndo_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = mwifiex_tx_timeout,
.ndo_get_stats = mwifiex_get_stats,
@@ -1296,7 +1309,6 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv,
priv->gen_idx = MWIFIEX_AUTO_IDX_MASK;
priv->num_tx_timeout = 0;
ether_addr_copy(priv->curr_addr, priv->adapter->perm_addr);
- memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN);
if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA ||
GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) {
diff --git a/drivers/net/wireless/marvell/mwifiex/main.h b/drivers/net/wireless/marvell/mwifiex/main.h
index f8cf307..84be38e 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.h
+++ b/drivers/net/wireless/marvell/mwifiex/main.h
@@ -165,6 +165,8 @@ enum {
/* Address alignment */
#define MWIFIEX_ALIGN_ADDR(p, a) (((long)(p) + (a) - 1) & ~((a) - 1))
+#define MWIFIEX_MAC_LOCAL_ADMIN_BIT 41
+
/**
*enum mwifiex_debug_level - marvell wifi debug level
*/
@@ -1672,6 +1674,8 @@ void mwifiex_process_tx_pause_event(struct mwifiex_private *priv,
void mwifiex_process_multi_chan_event(struct mwifiex_private *priv,
struct sk_buff *event_skb);
void mwifiex_multi_chan_resync(struct mwifiex_adapter *adapter);
+int mwifiex_set_mac_address(struct mwifiex_private *priv,
+ struct net_device *dev);
#ifdef CONFIG_DEBUG_FS
void mwifiex_debugfs_init(void);
--
1.9.1
next reply other threads:[~2017-08-07 1:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-07 1:36 Xinming Hu [this message]
2017-08-08 11:50 ` [v2] mwifiex: p2p: use separate device address Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502069766-25841-1-git-send-email-huxinming820@gmail.com \
--to=huxinming820@gmail.com \
--cc=briannorris@google.com \
--cc=cluo@marvell.com \
--cc=dtor@google.com \
--cc=gbhat@marvell.com \
--cc=huxm@marvell.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=rajatja@google.com \
--cc=songtao@marvell.com \
--cc=yangzy@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).