From: Amitkumar Karwar <amitkarwar@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org,
Amitkumar Karwar <amit.karwar@redpinesignals.com>,
Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Subject: [v2 01/11] rsi: advertise ap mode support
Date: Wed, 16 Aug 2017 18:43:08 +0530 [thread overview]
Message-ID: <1502889198-4478-2-git-send-email-amitkarwar@gmail.com> (raw)
In-Reply-To: <1502889198-4478-1-git-send-email-amitkarwar@gmail.com>
From: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
AP mode support is advertised to cfg80211. Necessary wiphy
parameters are initialized.
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
---
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 28 +++++++++++++++++++++++++++-
drivers/net/wireless/rsi/rsi_main.h | 10 ++++++++++
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
index 210ad79..2da5493 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -122,6 +122,23 @@ const u16 rsi_mcsrates[8] = {
RSI_RATE_MCS4, RSI_RATE_MCS5, RSI_RATE_MCS6, RSI_RATE_MCS7
};
+static const u32 rsi_max_ap_stas[16] = {
+ 32, /* 1 - Wi-Fi alone */
+ 0, /* 2 */
+ 0, /* 3 */
+ 0, /* 4 - BT EDR alone */
+ 4, /* 5 - STA + BT EDR */
+ 32, /* 6 - AP + BT EDR */
+ 0, /* 7 */
+ 0, /* 8 - BT LE alone */
+ 4, /* 9 - STA + BE LE */
+ 0, /* 10 */
+ 0, /* 11 */
+ 0, /* 12 */
+ 1, /* 13 - STA + BT Dual */
+ 4, /* 14 - AP + BT Dual */
+};
+
/**
* rsi_is_cipher_wep() - This function determines if the cipher is WEP or not.
* @common: Pointer to the driver private structure.
@@ -1348,7 +1365,8 @@ int rsi_mac80211_attach(struct rsi_common *common)
SET_IEEE80211_PERM_ADDR(hw, common->mac_addr);
ether_addr_copy(hw->wiphy->addr_mask, addr_mask);
- wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP);
wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
wiphy->retry_short = RETRY_SHORT;
wiphy->retry_long = RETRY_LONG;
@@ -1363,6 +1381,14 @@ int rsi_mac80211_attach(struct rsi_common *common)
wiphy->bands[NL80211_BAND_5GHZ] =
&adapter->sbands[NL80211_BAND_5GHZ];
+ /* AP Parameters */
+ wiphy->max_ap_assoc_sta = rsi_max_ap_stas[common->oper_mode - 1];
+ common->max_stations = wiphy->max_ap_assoc_sta;
+ rsi_dbg(ERR_ZONE, "Max Stations Allowed = %d\n", common->max_stations);
+ hw->sta_data_size = sizeof(struct rsi_sta);
+ wiphy->flags = WIPHY_FLAG_REPORTS_OBSS;
+ wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ wiphy->features |= NL80211_FEATURE_INACTIVITY_TIMER;
wiphy->reg_notifier = rsi_reg_notify;
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index d05b5e0..0077888 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -21,6 +21,13 @@
#include <linux/skbuff.h>
#include <net/mac80211.h>
+struct rsi_sta {
+ struct ieee80211_sta *sta;
+ s16 sta_id;
+ u16 seq_start[IEEE80211_NUM_TIDS];
+ bool start_tx_aggr[IEEE80211_NUM_TIDS];
+};
+
struct rsi_hw;
#include "rsi_ps.h"
@@ -253,6 +260,9 @@ struct rsi_common {
u16 beacon_interval;
u8 dtim_cnt;
+
+ /* AP mode parameters */
+ int max_stations;
};
enum host_intf {
--
2.7.4
next prev parent reply other threads:[~2017-08-16 13:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 13:13 [v2 00/11] rsi: support for AP mode Amitkumar Karwar
2017-08-16 13:13 ` Amitkumar Karwar [this message]
2017-08-17 7:07 ` [v2,01/11] rsi: advertise ap mode support Kalle Valo
2017-08-16 13:13 ` [v2 02/11] rsi: add interface changes for ap mode Amitkumar Karwar
2017-08-16 13:13 ` [v2 03/11] rsi: remove interface changes for AP mode Amitkumar Karwar
2017-08-16 13:13 ` [v2 04/11] rsi: add beacon " Amitkumar Karwar
2017-08-16 13:13 ` [v2 05/11] rsi: handle station connection in " Amitkumar Karwar
2017-08-16 13:13 ` [v2 06/11] rsi: handle station disconnection " Amitkumar Karwar
2017-08-16 13:13 ` [v2 07/11] rsi: data and managemet path changes for " Amitkumar Karwar
2017-08-16 13:13 ` [v2 08/11] rsi: use common descriptor for auto rate frame Amitkumar Karwar
2017-08-16 13:13 ` [v2 09/11] rsi: update tx auto rate command frame for AP mode Amitkumar Karwar
2017-08-16 13:13 ` [v2 10/11] rsi: aggregation parameters " Amitkumar Karwar
2017-08-16 13:13 ` [v2 11/11] rsi: security enhancements " Amitkumar Karwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502889198-4478-2-git-send-email-amitkarwar@gmail.com \
--to=amitkarwar@gmail.com \
--cc=amit.karwar@redpinesignals.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=prameela.j04cs@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).