[PATCH 1/2] ath10k: update tdls teardown state to target

[<mpubbise@qti.qualcomm.com>]

From: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>

It is required to update the teardown state of the peer when
a tdls link with that peer is terminated. This information is
useful for the target to perform some cleanups wrt the tdls peer.

Without proper cleanup, target assumes that the peer is connected and
blocks future connection requests, updating the teardown state of the
peer addresses the problem.

Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version.

Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5683f1a..35b7523 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6183,6 +6183,16 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			   "mac vdev %d peer delete %pM sta %pK (sta gone)\n",
 			   arvif->vdev_id, sta->addr, sta);
 
+		if (sta->tdls) {
+			ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id,
+							  sta,
+							  WMI_TDLS_PEER_STATE_TEARDOWN);
+			if (ret)
+				ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n",
+					    sta->addr,
+					    WMI_TDLS_PEER_STATE_TEARDOWN, ret);
+		}
+
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
-- 
1.7.9.5