[PATCH V6 0/5] Add TDLS feature for ath10k

linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH V6 0/5] Add TDLS feature for ath10k
       [not found] <TDLS for ath10k patches V6>
@ 2017-10-16  6:00 ` yintang
  2017-10-16  6:00   ` [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature yintang
                     ` (4 more replies)
  2017-10-16  6:01 ` [PATCH V6 5/5] ath10k: Fix TDLS peer TX data failure issue on encryped AP yintang
  1 sibling, 5 replies; 10+ messages in thread
From: yintang @ 2017-10-16  6:00 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

From: Yingying Tang <yintang@qti.qualcomm.com>

This patchset is for Rome PCIE chip, it will not affect other hardware

Yingying Tang (5):
  mac80211: Enable TDLS peer buffer STA feature
  ath10k: Enable TDLS peer buffer STA feature
  ath10k: Enable TDLS peer inactivity detection
  ath10k: Avoid to set WEP key for TDLS peer
  ath10k: Fix TDLS peer TX data failure issue on encryped AP

 drivers/net/wireless/ath/ath10k/mac.c     |    9 ++++-
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |   55 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |    9 +++++
 drivers/net/wireless/ath/ath10k/wmi.h     |    1 +
 include/net/mac80211.h                    |    4 +++
 net/mac80211/tdls.c                       |    5 ++-
 6 files changed, 81 insertions(+), 2 deletions(-)

-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature
  2017-10-16  6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
@ 2017-10-16  6:00   ` yintang
  2017-10-18 10:35     ` Johannes Berg
  2017-10-16  6:00   ` [PATCH V6 2/5] ath10k: " yintang
                     ` (3 subsequent siblings)
  4 siblings, 1 reply; 10+ messages in thread
From: yintang @ 2017-10-16  6:00 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

From: Yingying Tang <yintang@qti.qualcomm.com>

Enable TDLS peer buffer STA feature.
Set extended capability bit to enable buffer STA when driver
support it.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
 include/net/mac80211.h |    4 ++++
 net/mac80211/tdls.c    |    5 ++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f8149ca..5928123 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2067,6 +2067,9 @@ struct ieee80211_txq {
  *	The stack will not do fragmentation.
  *	The callback for @set_frag_threshold should be set as well.
  *
+ * @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware support buffer STA when
+ *	TDLS is established.
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -2109,6 +2112,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TX_FRAG_LIST,
 	IEEE80211_HW_REPORTS_LOW_ACK,
 	IEEE80211_HW_SUPPORTS_TX_FRAG,
+	IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index 91093d4..8231466 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -47,6 +47,8 @@ static void ieee80211_tdls_add_ext_capab(struct ieee80211_sub_if_data *sdata,
 			   NL80211_FEATURE_TDLS_CHANNEL_SWITCH;
 	bool wider_band = ieee80211_hw_check(&local->hw, TDLS_WIDER_BW) &&
 			  !ifmgd->tdls_wider_bw_prohibited;
+	bool buffer_sta = ieee80211_hw_check(&local->hw,
+					     SUPPORTS_TDLS_BUFFER_STA);
 	struct ieee80211_supported_band *sband = ieee80211_get_sband(sdata);
 	bool vht = sband && sband->vht_cap.vht_supported;
 	u8 *pos = skb_put(skb, 10);
@@ -56,7 +58,8 @@ static void ieee80211_tdls_add_ext_capab(struct ieee80211_sub_if_data *sdata,
 	*pos++ = 0x0;
 	*pos++ = 0x0;
 	*pos++ = 0x0;
-	*pos++ = chan_switch ? WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH : 0;
+	*pos++ = (chan_switch ? WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH : 0) |
+		 (buffer_sta ? WLAN_EXT_CAPA4_TDLS_BUFFER_STA : 0);
 	*pos++ = WLAN_EXT_CAPA5_TDLS_ENABLED;
 	*pos++ = 0;
 	*pos++ = 0;
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature
  2017-10-16  6:00   ` [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature yintang
@ 2017-10-18 10:35     ` Johannes Berg
  2017-10-20  3:34       ` Yingying Tang
  0 siblings, 1 reply; 10+ messages in thread
From: Johannes Berg @ 2017-10-18 10:35 UTC (permalink / raw)
  To: yintang, ath10k; +Cc: linux-wireless

On Mon, 2017-10-16 at 14:00 +0800, yintang@qti.qualcomm.com wrote:
> From: Yingying Tang <yintang@qti.qualcomm.com>
> 
> Enable TDLS peer buffer STA feature.
> Set extended capability bit to enable buffer STA when driver
> support it.

It would help if you could (build) test your changes :-)

johannes

^ permalink raw reply	[flat|nested] 10+ messages in thread

* RE: [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature
  2017-10-18 10:35     ` Johannes Berg
@ 2017-10-20  3:34       ` Yingying Tang
  2017-10-23  6:29         ` Johannes Berg
  0 siblings, 1 reply; 10+ messages in thread
From: Yingying Tang @ 2017-10-20  3:34 UTC (permalink / raw)
  To: Johannes Berg, ath10k@lists.infradead.org; +Cc: linux-wireless@vger.kernel.org
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^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature
  2017-10-20  3:34       ` Yingying Tang
@ 2017-10-23  6:29         ` Johannes Berg
  0 siblings, 0 replies; 10+ messages in thread
From: Johannes Berg @ 2017-10-23  6:29 UTC (permalink / raw)
  To: Yingying Tang, ath10k@lists.infradead.org; +Cc: linux-wireless@vger.kernel.org

On Fri, 2017-10-20 at 03:34 +0000, Yingying Tang wrote:
> Hi Johannes,
> 
> I have built and tested it, it can work

No, you haven't, at least not comprehensively. Try to enable debugfs.

johannes

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH V6 2/5] ath10k: Enable TDLS peer buffer STA feature
  2017-10-16  6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
  2017-10-16  6:00   ` [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature yintang
@ 2017-10-16  6:00   ` yintang
  2017-10-16  6:00   ` [PATCH V6 3/5] ath10k: Enable TDLS peer inactivity detection yintang
                     ` (2 subsequent siblings)
  4 siblings, 0 replies; 10+ messages in thread
From: yintang @ 2017-10-16  6:00 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

From: Yingying Tang <yintang@qti.qualcomm.com>

Enable TDLS peer buffer STA feature.
QCA6174 firmware(version: WLAN.RM.4.4) support TDLS peer buffer STA,
it reports this capability through wmi service map in wmi service ready
event. Set related parameter in TDLS WMI command to enable this feature.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c     |    3 +++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |    3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5683f1a..1672043 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8204,6 +8204,9 @@ int ath10k_mac_register(struct ath10k *ar)
 		ieee80211_hw_set(ar->hw, TDLS_WIDER_BW);
 	}
 
+	if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
+		ieee80211_hw_set(ar->hw, SUPPORTS_TDLS_BUFFER_STA);
+
 	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 7616c1c..f60b46e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2747,6 +2747,9 @@ static void *ath10k_wmi_tlv_put_wmm(void *ptr,
 	 */
 	u32 options = 0;
 
+	if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
+		options |=  WMI_TLV_TDLS_BUFFER_STA_EN;
+
 	len = sizeof(*tlv) + sizeof(*cmd);
 	skb = ath10k_wmi_alloc_skb(ar, len);
 	if (!skb)
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH V6 3/5] ath10k: Enable TDLS peer inactivity detection
  2017-10-16  6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
  2017-10-16  6:00   ` [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature yintang
  2017-10-16  6:00   ` [PATCH V6 2/5] ath10k: " yintang
@ 2017-10-16  6:00   ` yintang
  2017-10-16  6:00   ` [PATCH V6 4/5] ath10k: Avoid to set WEP key for TDLS peer yintang
  2017-10-18 23:37   ` [PATCH V6 0/5] Add TDLS feature for ath10k Peter Oh
  4 siblings, 0 replies; 10+ messages in thread
From: yintang @ 2017-10-16  6:00 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

From: Yingying Tang <yintang@qti.qualcomm.com>

Enable TDLS peer inactivity detetion feature.
QCA6174 firmware(version: WLAN.RM.4.4) support TDLS link inactivity detecting.
Set related parameters in TDLS WMI command to enable this feature.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |   52 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |    9 +++++
 drivers/net/wireless/ath/ath10k/wmi.h     |    1 +
 3 files changed, 62 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index f60b46e..63bb2c4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -412,6 +412,49 @@ static int ath10k_wmi_tlv_event_tx_pause(struct ath10k *ar,
 	return 0;
 }
 
+void ath10k_wmi_event_tdls_peer(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ieee80211_sta *station;
+	const struct wmi_tlv_tdls_peer_event *ev;
+	const void **tb;
+	struct ath10k_vif *arvif;
+
+	tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ath10k_warn(ar, "tdls peer failed to parse tlv");
+		return;
+	}
+	ev = tb[WMI_TLV_TAG_STRUCT_TDLS_PEER_EVENT];
+	if (!ev) {
+		kfree(tb);
+		ath10k_warn(ar, "tdls peer NULL event");
+		return;
+	}
+
+	switch (ev->peer_reason) {
+	case WMI_TDLS_TEARDOWN_REASON_TX:
+	case WMI_TDLS_TEARDOWN_REASON_RSSI:
+	case WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT:
+		station = ieee80211_find_sta_by_ifaddr(ar->hw,
+						       ev->peer_macaddr.addr,
+						       NULL);
+		if (!station) {
+			ath10k_warn(ar, "did not find station from tdls peer event");
+			kfree(tb);
+			return;
+		}
+		arvif = ath10k_get_arvif(ar, ev->vdev_id);
+		ieee80211_tdls_oper_request(
+					arvif->vif, station->addr,
+					NL80211_TDLS_TEARDOWN,
+					WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE,
+					GFP_ATOMIC
+					);
+		break;
+	}
+	kfree(tb);
+}
+
 /***********/
 /* TLV ops */
 /***********/
@@ -552,6 +595,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_TLV_TX_PAUSE_EVENTID:
 		ath10k_wmi_tlv_event_tx_pause(ar, skb);
 		break;
+	case WMI_TLV_TDLS_PEER_EVENTID:
+		ath10k_wmi_event_tdls_peer(ar, skb);
+		break;
 	default:
 		ath10k_warn(ar, "Unknown eventid: %d\n", id);
 		break;
@@ -2750,6 +2796,12 @@ static void *ath10k_wmi_tlv_put_wmm(void *ptr,
 	if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
 		options |=  WMI_TLV_TDLS_BUFFER_STA_EN;
 
+	/* WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL means firm will handle TDLS
+	 * link inactivity detecting logic.
+	 */
+	if (state == WMI_TDLS_ENABLE_ACTIVE)
+		state = WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL;
+
 	len = sizeof(*tlv) + sizeof(*cmd);
 	skb = ath10k_wmi_alloc_skb(ar, len);
 	if (!skb)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 22cf011..8fdb381 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1641,6 +1641,15 @@ struct wmi_tlv_tx_pause_ev {
 	__le32 tid_map;
 } __packed;
 
+struct wmi_tlv_tdls_peer_event {
+	struct wmi_mac_addr    peer_macaddr;
+	__le32 peer_status;
+	__le32 peer_reason;
+	__le32 vdev_id;
+} __packed;
+
+
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 7a3606d..74a6c78 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6720,6 +6720,7 @@ enum wmi_tdls_state {
 	WMI_TDLS_DISABLE,
 	WMI_TDLS_ENABLE_PASSIVE,
 	WMI_TDLS_ENABLE_ACTIVE,
+	WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
 };
 
 enum wmi_tdls_peer_state {
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH V6 4/5] ath10k: Avoid to set WEP key for TDLS peer
  2017-10-16  6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
                     ` (2 preceding siblings ...)
  2017-10-16  6:00   ` [PATCH V6 3/5] ath10k: Enable TDLS peer inactivity detection yintang
@ 2017-10-16  6:00   ` yintang
  2017-10-18 23:37   ` [PATCH V6 0/5] Add TDLS feature for ath10k Peter Oh
  4 siblings, 0 replies; 10+ messages in thread
From: yintang @ 2017-10-16  6:00 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

From: Yingying Tang <yintang@qti.qualcomm.com>

TDLS peer do not need WEP key. Setting WEP key will lead
to TDLS setup failure. Add fix to avoid setting WEP key
for TDLS peer.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1672043..a984a72 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2966,7 +2966,7 @@ static int ath10k_station_assoc(struct ath10k *ar,
 		}
 
 		/* Plumb cached keys only for static WEP */
-		if (arvif->def_wep_key_idx != -1) {
+		if ((arvif->def_wep_key_idx != -1) && (!sta->tdls)) {
 			ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
 			if (ret) {
 				ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n",
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH V6 0/5] Add TDLS feature for ath10k
  2017-10-16  6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
                     ` (3 preceding siblings ...)
  2017-10-16  6:00   ` [PATCH V6 4/5] ath10k: Avoid to set WEP key for TDLS peer yintang
@ 2017-10-18 23:37   ` Peter Oh
  4 siblings, 0 replies; 10+ messages in thread
From: Peter Oh @ 2017-10-18 23:37 UTC (permalink / raw)
  To: yintang, ath10k; +Cc: linux-wireless



On 10/15/2017 11:00 PM, yintang@qti.qualcomm.com wrote:
> From: Yingying Tang <yintang@qti.qualcomm.com>
>
> This patchset is for Rome PCIE chip, it will not affect other hardware
Please add your patchset history here until V6.
That's what cover letter is supposed to have.
> Yingying Tang (5):
>    mac80211: Enable TDLS peer buffer STA feature
>    ath10k: Enable TDLS peer buffer STA feature
>    ath10k: Enable TDLS peer inactivity detection
>    ath10k: Avoid to set WEP key for TDLS peer
>    ath10k: Fix TDLS peer TX data failure issue on encryped AP
>
>   drivers/net/wireless/ath/ath10k/mac.c     |    9 ++++-
>   drivers/net/wireless/ath/ath10k/wmi-tlv.c |   55 +++++++++++++++++++++++++++++
>   drivers/net/wireless/ath/ath10k/wmi-tlv.h |    9 +++++
>   drivers/net/wireless/ath/ath10k/wmi.h     |    1 +
>   include/net/mac80211.h                    |    4 +++
>   net/mac80211/tdls.c                       |    5 ++-
>   6 files changed, 81 insertions(+), 2 deletions(-)
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH V6 5/5] ath10k: Fix TDLS peer TX data failure issue on encryped AP
       [not found] <TDLS for ath10k patches V6>
  2017-10-16  6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
@ 2017-10-16  6:01 ` yintang
  1 sibling, 0 replies; 10+ messages in thread
From: yintang @ 2017-10-16  6:01 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

From: Yingying Tang <yintang@qti.qualcomm.com>

For WPA encryption, QCA6174 firmware(version: WLAN.RM.4.4) will unblock
data when M4 was sent successfully. For other encryption which didn't need
4-way handshake firmware will unblock the data when peer authorized. Since
TDLS is 3-way handshake host need send authorize cmd to firmware to unblock
data.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a984a72..fe14d3c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5841,6 +5841,10 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		ath10k_warn(ar, "Peer %pM disappeared!\n", peer_addr);
 	spin_unlock_bh(&ar->data_lock);
 
+	if (sta && sta->tdls)
+		ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+					  WMI_PEER_AUTHORIZE, 1);
+
 exit:
 	mutex_unlock(&ar->conf_mutex);
 	return ret;
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2017-10-23  6:29 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <TDLS for ath10k patches V6>
2017-10-16  6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
2017-10-16  6:00   ` [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature yintang
2017-10-18 10:35     ` Johannes Berg
2017-10-20  3:34       ` Yingying Tang
2017-10-23  6:29         ` Johannes Berg
2017-10-16  6:00   ` [PATCH V6 2/5] ath10k: " yintang
2017-10-16  6:00   ` [PATCH V6 3/5] ath10k: Enable TDLS peer inactivity detection yintang
2017-10-16  6:00   ` [PATCH V6 4/5] ath10k: Avoid to set WEP key for TDLS peer yintang
2017-10-18 23:37   ` [PATCH V6 0/5] Add TDLS feature for ath10k Peter Oh
2017-10-16  6:01 ` [PATCH V6 5/5] ath10k: Fix TDLS peer TX data failure issue on encryped AP yintang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).