From: Maya Erez <qca_merez@qca.qualcomm.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Lazar Alexei <QCA_ailizaro@QCA.qualcomm.com>,
linux-wireless@vger.kernel.org, wil6210@qca.qualcomm.com,
Maya Erez <qca_merez@qca.qualcomm.com>
Subject: [PATCH 12/12] wil6210: update statistics for suspend
Date: Wed, 25 Oct 2017 16:14:07 +0300 [thread overview]
Message-ID: <1508937247-11890-13-git-send-email-qca_merez@qca.qualcomm.com> (raw)
In-Reply-To: <1508937247-11890-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Currently the statistics show how many successful/failed
suspend/resume operations the system had.
Update the statistics by splitting each successful/failed
suspend/resume operations to radio on/off.
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/debugfs.c | 27 ++++++++++++++++++---------
drivers/net/wireless/ath/wil6210/pcie_bus.c | 20 ++++++++++++++------
drivers/net/wireless/ath/wil6210/pm.c | 8 +++++---
drivers/net/wireless/ath/wil6210/wil6210.h | 11 ++++++++---
4 files changed, 45 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 03d17ea..9164855 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1685,20 +1685,29 @@ static ssize_t wil_read_suspend_stats(struct file *file,
size_t count, loff_t *ppos)
{
struct wil6210_priv *wil = file->private_data;
- static char text[400];
+ static char text[500];
int n;
n = snprintf(text, sizeof(text),
- "Suspend statistics:\n"
+ "Radio on suspend statistics:\n"
+ "successful suspends:%ld failed suspends:%ld\n"
+ "successful resumes:%ld failed resumes:%ld\n"
+ "rejected by device:%ld\n"
+ "Radio off suspend statistics:\n"
"successful suspends:%ld failed suspends:%ld\n"
"successful resumes:%ld failed resumes:%ld\n"
- "rejected by host:%ld rejected by device:%ld\n",
- wil->suspend_stats.successful_suspends,
- wil->suspend_stats.failed_suspends,
- wil->suspend_stats.successful_resumes,
- wil->suspend_stats.failed_resumes,
- wil->suspend_stats.rejected_by_host,
- wil->suspend_stats.rejected_by_device);
+ "General statistics:\n"
+ "rejected by host:%ld\n",
+ wil->suspend_stats.r_on.successful_suspends,
+ wil->suspend_stats.r_on.failed_suspends,
+ wil->suspend_stats.r_on.successful_resumes,
+ wil->suspend_stats.r_on.failed_resumes,
+ wil->suspend_stats.rejected_by_device,
+ wil->suspend_stats.r_off.successful_suspends,
+ wil->suspend_stats.r_off.failed_suspends,
+ wil->suspend_stats.r_off.successful_resumes,
+ wil->suspend_stats.r_off.failed_resumes,
+ wil->suspend_stats.rejected_by_host);
n = min_t(int, n, sizeof(text));
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 07a44d3..9f11fdc 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -398,14 +398,16 @@ static int wil6210_suspend(struct device *dev, bool is_runtime)
rc = wil_suspend(wil, is_runtime, keep_radio_on);
if (!rc) {
- wil->suspend_stats.successful_suspends++;
-
/* In case radio stays on, platform device will control
* PCIe master
*/
- if (!keep_radio_on)
+ if (!keep_radio_on) {
/* disable bus mastering */
pci_clear_master(pdev);
+ wil->suspend_stats.r_off.successful_suspends++;
+ } else {
+ wil->suspend_stats.r_on.successful_suspends++;
+ }
}
out:
return rc;
@@ -431,11 +433,17 @@ static int wil6210_resume(struct device *dev, bool is_runtime)
rc = wil_resume(wil, is_runtime, keep_radio_on);
if (rc) {
wil_err(wil, "device failed to resume (%d)\n", rc);
- wil->suspend_stats.failed_resumes++;
- if (!keep_radio_on)
+ if (!keep_radio_on) {
pci_clear_master(pdev);
+ wil->suspend_stats.r_off.failed_resumes++;
+ } else {
+ wil->suspend_stats.r_on.failed_resumes++;
+ }
} else {
- wil->suspend_stats.successful_resumes++;
+ if (keep_radio_on)
+ wil->suspend_stats.r_on.successful_resumes++;
+ else
+ wil->suspend_stats.r_off.successful_resumes++;
}
return rc;
diff --git a/drivers/net/wireless/ath/wil6210/pm.c b/drivers/net/wireless/ath/wil6210/pm.c
index 48ec186..ec39ac7 100644
--- a/drivers/net/wireless/ath/wil6210/pm.c
+++ b/drivers/net/wireless/ath/wil6210/pm.c
@@ -179,7 +179,7 @@ static int wil_suspend_keep_radio_on(struct wil6210_priv *wil)
break;
wil_err(wil,
"TO waiting for idle RX, suspend failed\n");
- wil->suspend_stats.failed_suspends++;
+ wil->suspend_stats.r_on.failed_suspends++;
goto resume_after_fail;
}
wil_dbg_ratelimited(wil, "rx vring is not empty -> NAPI\n");
@@ -195,7 +195,7 @@ static int wil_suspend_keep_radio_on(struct wil6210_priv *wil)
*/
if (!wil_is_wmi_idle(wil)) {
wil_err(wil, "suspend failed due to pending WMI events\n");
- wil->suspend_stats.failed_suspends++;
+ wil->suspend_stats.r_on.failed_suspends++;
goto resume_after_fail;
}
@@ -209,7 +209,7 @@ static int wil_suspend_keep_radio_on(struct wil6210_priv *wil)
if (rc) {
wil_err(wil, "platform device failed to suspend (%d)\n",
rc);
- wil->suspend_stats.failed_suspends++;
+ wil->suspend_stats.r_on.failed_suspends++;
wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
wil_unmask_irq(wil);
goto resume_after_fail;
@@ -256,6 +256,7 @@ static int wil_suspend_radio_off(struct wil6210_priv *wil)
rc = wil_down(wil);
if (rc) {
wil_err(wil, "wil_down : %d\n", rc);
+ wil->suspend_stats.r_off.failed_suspends++;
goto out;
}
}
@@ -268,6 +269,7 @@ static int wil_suspend_radio_off(struct wil6210_priv *wil)
rc = wil->platform_ops.suspend(wil->platform_handle, false);
if (rc) {
wil_enable_irq(wil);
+ wil->suspend_stats.r_off.failed_suspends++;
goto out;
}
}
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 0d8457e..52c477f 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -82,12 +82,17 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
*/
#define WIL_MAX_MPDU_OVERHEAD (62)
-struct wil_suspend_stats {
+struct wil_suspend_count_stats {
unsigned long successful_suspends;
- unsigned long failed_suspends;
unsigned long successful_resumes;
+ unsigned long failed_suspends;
unsigned long failed_resumes;
- unsigned long rejected_by_device;
+};
+
+struct wil_suspend_stats {
+ struct wil_suspend_count_stats r_off;
+ struct wil_suspend_count_stats r_on;
+ unsigned long rejected_by_device; /* only radio on */
unsigned long rejected_by_host;
};
--
1.9.1
next prev parent reply other threads:[~2017-10-25 13:14 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 13:13 [PATCH 00/12] wil6210 patches Maya Erez
2017-10-25 13:13 ` [PATCH 01/12] wil6210: run-time PM when interface down Maya Erez
2017-10-27 13:33 ` [01/12] " Kalle Valo
2017-10-29 19:58 ` Maya Haim
2017-10-25 13:13 ` [PATCH 02/12] wil6210: print human readable names of WMI commands and events Maya Erez
2017-10-25 13:13 ` [PATCH 03/12] wil6210: refresh FW capabilities during interface up Maya Erez
2017-10-28 15:01 ` Kalle Valo
2017-10-28 15:25 ` Lior David
2017-10-30 6:54 ` Kalle Valo
2017-10-25 13:13 ` [PATCH 04/12] wil6210: abort properly in cfg suspend Maya Erez
2017-10-25 13:14 ` [PATCH 05/12] wil6210: fix length check in __wmi_send Maya Erez
2017-10-25 13:14 ` [PATCH 06/12] wil6210: add block size checks during FW load Maya Erez
2017-10-25 13:14 ` [PATCH 07/12] wil6210: missing length check in wmi_set_ie Maya Erez
2017-10-25 13:14 ` [PATCH 08/12] wil6210: missing length check in wil_cfg80211_mgmt_tx Maya Erez
2017-10-25 13:14 ` [PATCH 09/12] wil6210: get suspend reject reason and resume triggers from FW Maya Erez
2017-10-25 13:14 ` [PATCH 10/12] wil6210: fix PCIe bus mastering in case of interface down Maya Erez
2017-10-25 13:14 ` [PATCH 11/12] wil6210: remove suspend time statistics Maya Erez
2017-10-25 13:14 ` Maya Erez [this message]
2017-10-28 15:18 ` [PATCH 12/12] wil6210: update statistics for suspend Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508937247-11890-13-git-send-email-qca_merez@qca.qualcomm.com \
--to=qca_merez@qca.qualcomm.com \
--cc=QCA_ailizaro@QCA.qualcomm.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=wil6210@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox