linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luca Coelho <luca@coelho.fi>
To: kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org, linuxwifi@intel.com
Subject: pull-request: iwlwifi-next 2017-11-03
Date: Fri, 03 Nov 2017 12:02:44 +0200	[thread overview]
Message-ID: <1509703364.4492.350.camel@coelho.fi> (raw)

[-- Attachment #1: Type: text/plain, Size: 4368 bytes --]

Hi Kalle,

Here's the final set of patches intended for v4.15.  It's not too
important to get them into v4.15 if there is no time anymore.  There
are a few new PCI IDs that can be added in the rc series or stable
(they need to go to other stable releases anyway).  And there's also
one bugfix that I could also send to rc.  The rest are just cleanups,
improvements or related to the A000 series.  Let me know how it goes
and I'll adapt if needed.

I have sent this out before and kbuildbot reported success.

Please let me know if there are any issues.

Cheers,
Luca.


The following changes since commit e226fb5affccca98c405de80527180224d93d251:

  Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git (2017-11-02 19:48:25 +0200)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next.git tags/iwlwifi-next-for-kalle-2017-11-03

for you to fetch changes up to 57b36f7fcb39c5eae8c1f463699f747af69643ba:

  iwlwifi: add new cards for a000 series (2017-11-03 11:56:10 +0200)

----------------------------------------------------------------
iwlwifi updates

* Some new PCI IDs;
* A bunch of cleanups;
* The timers update by Kees;
* Add more register dump call-sites;
* A fix for a locking issue in the TX flush code;
* Actual implementation of the TX flush code for A000;
* An optimization to drop RX frames during restart to avoid BA issues;

----------------------------------------------------------------
Emmanuel Grumbach (3):
      iwlwifi: mvm: rs: remove the ANT C from the toogle antenna logic
      iwlwifi: remove dead code for internal devices only
      iwlwifi: remove host assisted paging

Ihab Zhaika (3):
      iwlwifi: add new cards for 8260 series
      iwlwifi: add new cards for 8265 series
      iwlwifi: add new cards for a000 series

Kees Cook (1):
      iwlwifi: mvm: Convert timers to use timer_setup()

Kirtika Ruchandani (1):
      iwlwifi: Add more call-sites for pcie reg dumper

Liad Kaufman (1):
      iwlwifi: mvm: reset seq num after restart

Luca Coelho (1):
      iwlwifi: mvm: hold mutex when flushing in iwl_mvm_flush_no_vif()

Sara Sharon (6):
      iwlwifi: mvm: use RS macro instead of duplicating the code
      iwlwifi: mvm: cleanup references to aggregation count limit
      iwlwifi: mvm: improve latency when there is a reorder timeout
      iwlwifi: fix multi queue notification for a000 devices
      iwlwifi: mvm: refactor iwl_mvm_flush_no_vif
      iwlwifi: mvm: add missing implementation of flush for a000 devices

Shahar S Matityahu (1):
      iwlwifi: drop RX frames during hardware restart

 drivers/net/wireless/intel/iwlwifi/cfg/8000.c      |  51 -------------------------------------------------
 drivers/net/wireless/intel/iwlwifi/fw/api/paging.h |  24 -----------------------
 drivers/net/wireless/intel/iwlwifi/fw/file.h       |   2 +-
 drivers/net/wireless/intel/iwlwifi/fw/img.h        |   8 --------
 drivers/net/wireless/intel/iwlwifi/fw/paging.c     | 103 ++++++++++++---------------------------------------------------------------------------------------
 drivers/net/wireless/intel/iwlwifi/iwl-config.h    |   3 ---
 drivers/net/wireless/intel/iwlwifi/iwl-csr.h       |   2 --
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c       |   6 ------
 drivers/net/wireless/intel/iwlwifi/iwl-trans.h     |  42 +++++++++++-----------------------------
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c        |  15 ---------------
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |  62 ++++++++++++++++++++++++++++++-----------------------------
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h       |   4 ++--
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c       |   1 -
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c        |  10 +++-------
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c      |  23 ++++++++++++++++++++--
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c       |  50 ++++++++++++++++++++++++++++--------------------
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c        |   3 +--
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c      |  10 ++++++++++
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c    |   7 ++++---
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c       |   1 +
 20 files changed, 127 insertions(+), 300 deletions(-)

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

             reply	other threads:[~2017-11-03 10:02 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-03 10:02 Luca Coelho [this message]
2017-11-06 10:38 ` pull-request: iwlwifi-next 2017-11-03 Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1509703364.4492.350.camel@coelho.fi \
    --to=luca@coelho.fi \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linuxwifi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).